diff mbox series

[11/14] hwmon: peci: Add cputemp driver

Message ID 20210712220447.957418-12-iwona.winiarska@intel.com
State New
Headers show
Series [01/14] x86/cpu: Move intel-family to arch-independent headers | expand

Commit Message

Iwona Winiarska July 12, 2021, 10:04 p.m. UTC
Add peci-cputemp driver for Digital Thermal Sensor (DTS) thermal
readings of the processor package and processor cores that are
accessible via the PECI interface.

The main use case for the driver (and PECI interface) is out-of-band
management, where we're able to obtain the DTS readings from an external
entity connected with PECI, e.g. BMC on server platforms.

Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 MAINTAINERS                  |   7 +
 drivers/hwmon/Kconfig        |   2 +
 drivers/hwmon/Makefile       |   1 +
 drivers/hwmon/peci/Kconfig   |  18 ++
 drivers/hwmon/peci/Makefile  |   5 +
 drivers/hwmon/peci/common.h  |  46 ++++
 drivers/hwmon/peci/cputemp.c | 503 +++++++++++++++++++++++++++++++++++
 7 files changed, 582 insertions(+)
 create mode 100644 drivers/hwmon/peci/Kconfig
 create mode 100644 drivers/hwmon/peci/Makefile
 create mode 100644 drivers/hwmon/peci/common.h
 create mode 100644 drivers/hwmon/peci/cputemp.c

Comments

Guenter Roeck July 15, 2021, 5:45 p.m. UTC | #1
On Tue, Jul 13, 2021 at 12:04:44AM +0200, Iwona Winiarska wrote:
> Add peci-cputemp driver for Digital Thermal Sensor (DTS) thermal

> readings of the processor package and processor cores that are

> accessible via the PECI interface.

> 

> The main use case for the driver (and PECI interface) is out-of-band

> management, where we're able to obtain the DTS readings from an external

> entity connected with PECI, e.g. BMC on server platforms.

> 

> Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>

> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>


Note: Due to lack of revision information, this review does not take
any previous discussions into account, and it may miss critical information.
For a final review I'll have to compare the code against earlier versions
to determine if there are any relevant changes and if all comments
have been addressed. This may take some time.

> ---

>  MAINTAINERS                  |   7 +

>  drivers/hwmon/Kconfig        |   2 +

>  drivers/hwmon/Makefile       |   1 +

>  drivers/hwmon/peci/Kconfig   |  18 ++

>  drivers/hwmon/peci/Makefile  |   5 +

>  drivers/hwmon/peci/common.h  |  46 ++++

>  drivers/hwmon/peci/cputemp.c | 503 +++++++++++++++++++++++++++++++++++

>  7 files changed, 582 insertions(+)

>  create mode 100644 drivers/hwmon/peci/Kconfig

>  create mode 100644 drivers/hwmon/peci/Makefile

>  create mode 100644 drivers/hwmon/peci/common.h

>  create mode 100644 drivers/hwmon/peci/cputemp.c

> 

> diff --git a/MAINTAINERS b/MAINTAINERS

> index f47b5f634293..35ba9e3646bd 100644

> --- a/MAINTAINERS

> +++ b/MAINTAINERS

> @@ -14504,6 +14504,13 @@ L:	platform-driver-x86@vger.kernel.org

>  S:	Maintained

>  F:	drivers/platform/x86/peaq-wmi.c

>  

> +PECI HARDWARE MONITORING DRIVERS

> +M:	Iwona Winiarska <iwona.winiarska@intel.com>

> +R:	Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

> +L:	linux-hwmon@vger.kernel.org

> +S:	Supported

> +F:	drivers/hwmon/peci/

> +

>  PECI SUBSYSTEM

>  M:	Iwona Winiarska <iwona.winiarska@intel.com>

>  R:	Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig

> index e3675377bc5d..61c0e3404415 100644

> --- a/drivers/hwmon/Kconfig

> +++ b/drivers/hwmon/Kconfig

> @@ -1507,6 +1507,8 @@ config SENSORS_PCF8591

>  	  These devices are hard to detect and rarely found on mainstream

>  	  hardware. If unsure, say N.

>  

> +source "drivers/hwmon/peci/Kconfig"

> +

>  source "drivers/hwmon/pmbus/Kconfig"

>  

>  config SENSORS_PWM_FAN

> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile

> index d712c61c1f5e..f52331f212ed 100644

> --- a/drivers/hwmon/Makefile

> +++ b/drivers/hwmon/Makefile

> @@ -202,6 +202,7 @@ obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o

>  obj-$(CONFIG_SENSORS_XGENE)	+= xgene-hwmon.o

>  

>  obj-$(CONFIG_SENSORS_OCC)	+= occ/

> +obj-$(CONFIG_SENSORS_PECI)	+= peci/

>  obj-$(CONFIG_PMBUS)		+= pmbus/

>  

>  ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG

> diff --git a/drivers/hwmon/peci/Kconfig b/drivers/hwmon/peci/Kconfig

> new file mode 100644

> index 000000000000..e10eed68d70a

> --- /dev/null

> +++ b/drivers/hwmon/peci/Kconfig

> @@ -0,0 +1,18 @@

> +# SPDX-License-Identifier: GPL-2.0-only

> +

> +config SENSORS_PECI_CPUTEMP

> +	tristate "PECI CPU temperature monitoring client"

> +	depends on PECI

> +	select SENSORS_PECI

> +	select PECI_CPU

> +	help

> +	  If you say yes here you get support for the generic Intel PECI

> +	  cputemp driver which provides Digital Thermal Sensor (DTS) thermal

> +	  readings of the CPU package and CPU cores that are accessible via

> +	  the processor PECI interface.

> +

> +	  This driver can also be built as a module. If so, the module

> +	  will be called peci-cputemp.

> +

> +config SENSORS_PECI

> +	tristate

> diff --git a/drivers/hwmon/peci/Makefile b/drivers/hwmon/peci/Makefile

> new file mode 100644

> index 000000000000..e8a0ada5ab1f

> --- /dev/null

> +++ b/drivers/hwmon/peci/Makefile

> @@ -0,0 +1,5 @@

> +# SPDX-License-Identifier: GPL-2.0-only

> +

> +peci-cputemp-y := cputemp.o

> +

> +obj-$(CONFIG_SENSORS_PECI_CPUTEMP)	+= peci-cputemp.o

> diff --git a/drivers/hwmon/peci/common.h b/drivers/hwmon/peci/common.h

> new file mode 100644

> index 000000000000..54580c100d06

> --- /dev/null

> +++ b/drivers/hwmon/peci/common.h

> @@ -0,0 +1,46 @@

> +/* SPDX-License-Identifier: GPL-2.0-only */

> +/* Copyright (c) 2021 Intel Corporation */

> +

> +#include <linux/types.h>

> +

> +#ifndef __PECI_HWMON_COMMON_H

> +#define __PECI_HWMON_COMMON_H

> +

> +#define UPDATE_INTERVAL_DEFAULT		HZ

> +

> +/**

> + * struct peci_sensor_data - PECI sensor information

> + * @valid: flag to indicate the sensor value is valid

> + * @value: sensor value in milli units

> + * @last_updated: time of the last update in jiffies

> + */

> +struct peci_sensor_data {

> +	unsigned int valid;


Please use bool.

> +	s32 value;

> +	unsigned long last_updated;

> +};

> +

> +/**

> + * peci_sensor_need_update() - check whether sensor update is needed or not

> + * @sensor: pointer to sensor data struct

> + *

> + * Return: true if update is needed, false if not.

> + */

> +

> +static inline bool peci_sensor_need_update(struct peci_sensor_data *sensor)

> +{

> +	return !sensor->valid ||

> +	       time_after(jiffies, sensor->last_updated + UPDATE_INTERVAL_DEFAULT);



Since there is no other update interval, _DEFAULT does not have any value.
Please drop. Also, please select a prefix such as PECI_.

> +}

> +

> +/**

> + * peci_sensor_mark_updated() - mark the sensor is updated

> + * @sensor: pointer to sensor data struct

> + */

> +static inline void peci_sensor_mark_updated(struct peci_sensor_data *sensor)

> +{

> +	sensor->valid = 1;


		= true;

> +	sensor->last_updated = jiffies;

> +}

> +

> +#endif /* __PECI_HWMON_COMMON_H */

> diff --git a/drivers/hwmon/peci/cputemp.c b/drivers/hwmon/peci/cputemp.c

> new file mode 100644

> index 000000000000..56a526471687

> --- /dev/null

> +++ b/drivers/hwmon/peci/cputemp.c

> @@ -0,0 +1,503 @@

> +// SPDX-License-Identifier: GPL-2.0-only

> +// Copyright (c) 2018-2021 Intel Corporation

> +

> +#include <linux/auxiliary_bus.h>

> +#include <linux/bitfield.h>

> +#include <linux/bitops.h>

> +#include <linux/hwmon.h>

> +#include <linux/jiffies.h>

> +#include <linux/module.h>

> +#include <linux/peci.h>

> +#include <linux/peci-cpu.h>

> +#include <linux/units.h>

> +#include <linux/x86/intel-family.h>

> +

> +#include "common.h"

> +

> +#define CORE_NUMS_MAX		64

> +

> +#define DEFAULT_CHANNEL_NUMS	5

> +#define CORETEMP_CHANNEL_NUMS	CORE_NUMS_MAX

> +#define CPUTEMP_CHANNEL_NUMS	(DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)

> +

> +#define TEMP_TARGET_FAN_TEMP_MASK	GENMASK(15, 8)

> +#define TEMP_TARGET_REF_TEMP_MASK	GENMASK(23, 16)

> +#define TEMP_TARGET_TJ_OFFSET_MASK	GENMASK(29, 24)

> +

> +#define DTS_MARGIN_MASK		GENMASK(15, 0)

> +#define PCS_MODULE_TEMP_MASK	GENMASK(15, 0)

> +

> +#define DTS_FIXED_POINT_FRACTION	64

> +

> +struct resolved_cores_reg {

> +	u8 bus;

> +	u8 dev;

> +	u8 func;

> +	u8 offset;

> +};

> +

> +struct cpu_info {

> +	struct resolved_cores_reg *reg;

> +	u8 min_peci_revision;

> +};

> +

> +struct peci_cputemp {

> +	struct peci_device *peci_dev;

> +	struct device *dev;

> +	const char *name;

> +	const struct cpu_info *gen_info;

> +	struct {

> +		struct peci_sensor_data die;

> +		struct peci_sensor_data dts;

> +		struct peci_sensor_data tcontrol;

> +		struct peci_sensor_data tthrottle;

> +		struct peci_sensor_data tjmax;

> +		struct peci_sensor_data core[CORETEMP_CHANNEL_NUMS];

> +	} temp;

> +	const char **coretemp_label;

> +	DECLARE_BITMAP(core_mask, CORE_NUMS_MAX);

> +};

> +

> +enum cputemp_channels {

> +	channel_die,

> +	channel_dts,

> +	channel_tcontrol,

> +	channel_tthrottle,

> +	channel_tjmax,

> +	channel_core,

> +};

> +

> +static const char *cputemp_label[DEFAULT_CHANNEL_NUMS] = {

> +	"Die",

> +	"DTS",

> +	"Tcontrol",

> +	"Tthrottle",

> +	"Tjmax",

> +};

> +

> +static int get_temp_targets(struct peci_cputemp *priv)

> +{

> +	s32 tthrottle_offset, tcontrol_margin;

> +	u32 pcs;

> +	int ret;

> +

> +	/*

> +	 * Just use only the tcontrol marker to determine if target values need

> +	 * update.

> +	 */

> +	if (!peci_sensor_need_update(&priv->temp.tcontrol))

> +		return 0;

> +

True for the entire code: Please explain how this avoids race conditions
without locking between the condition check here and the call to
peci_sensor_mark_updated() below. The explanation needs to be added
as comment into the code for later reference.

> +	ret = peci_pcs_read(priv->peci_dev, PECI_PCS_TEMP_TARGET, 0, &pcs);

> +	if (ret)

> +		return ret;

> +

> +	priv->temp.tjmax.value = FIELD_GET(TEMP_TARGET_REF_TEMP_MASK, pcs) * MILLIDEGREE_PER_DEGREE;

> +

> +	tcontrol_margin = FIELD_GET(TEMP_TARGET_FAN_TEMP_MASK, pcs);

> +	tcontrol_margin = sign_extend32(tcontrol_margin, 7) * MILLIDEGREE_PER_DEGREE;

> +	priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;

> +

> +	tthrottle_offset = FIELD_GET(TEMP_TARGET_TJ_OFFSET_MASK, pcs) * MILLIDEGREE_PER_DEGREE;

> +	priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;

> +

> +	peci_sensor_mark_updated(&priv->temp.tcontrol);

> +

> +	return 0;

> +}

> +

> +/*

> + * Processors return a value of DTS reading in S10.6 fixed point format

> + * (sign, 10 bits signed integer value, 6 bits fractional).

> + * Error codes:

> + *   0x8000: General sensor error

> + *   0x8001: Reserved

> + *   0x8002: Underflow on reading value

> + *   0x8003-0x81ff: Reserved

> + */

> +static bool dts_valid(s32 val)

> +{

> +	return val < 0x8000 || val > 0x81ff;

> +}

> +

> +static s32 dts_to_millidegree(s32 val)

> +{

> +	return sign_extend32(val, 15) * MILLIDEGREE_PER_DEGREE / DTS_FIXED_POINT_FRACTION;

> +}

> +

> +static int get_die_temp(struct peci_cputemp *priv)

> +{

> +	s16 temp;

> +	int ret;

> +

> +	if (!peci_sensor_need_update(&priv->temp.die))

> +		return 0;

> +

> +	ret = peci_temp_read(priv->peci_dev, &temp);

> +	if (ret)

> +		return ret;

> +

> +	if (!dts_valid(temp))

> +		return -EIO;

> +

> +	/* Note that the tjmax should be available before calling it */

> +	priv->temp.die.value = priv->temp.tjmax.value + dts_to_millidegree(temp);

> +

> +	peci_sensor_mark_updated(&priv->temp.die);

> +

> +	return 0;

> +}

> +

> +static int get_dts(struct peci_cputemp *priv)

> +{

> +	s32 dts_margin;

> +	u32 pcs;

> +	int ret;

> +

> +	if (!peci_sensor_need_update(&priv->temp.dts))

> +		return 0;

> +

> +	ret = peci_pcs_read(priv->peci_dev, PECI_PCS_THERMAL_MARGIN, 0, &pcs);

> +	if (ret)

> +		return ret;

> +

> +	dts_margin = FIELD_GET(DTS_MARGIN_MASK, pcs);

> +	if (!dts_valid(dts_margin))

> +		return -EIO;

> +

> +	/* Note that the tcontrol should be available before calling it */

> +	priv->temp.dts.value = priv->temp.tcontrol.value - dts_to_millidegree(dts_margin);

> +

> +	peci_sensor_mark_updated(&priv->temp.dts);

> +

> +	return 0;

> +}

> +

> +static int get_core_temp(struct peci_cputemp *priv, int core_index)

> +{

> +	s32 core_dts_margin;

> +	u32 pcs;

> +	int ret;

> +

> +	if (!peci_sensor_need_update(&priv->temp.core[core_index]))

> +		return 0;

> +

> +	ret = peci_pcs_read(priv->peci_dev, PECI_PCS_MODULE_TEMP, core_index, &pcs);

> +	if (ret)

> +		return ret;

> +

> +	core_dts_margin = FIELD_GET(PCS_MODULE_TEMP_MASK, pcs);

> +	if (!dts_valid(core_dts_margin))

> +		return -EIO;

> +

> +	/* Note that the tjmax should be available before calling it */

> +	priv->temp.core[core_index].value =

> +		priv->temp.tjmax.value + dts_to_millidegree(core_dts_margin);

> +

> +	peci_sensor_mark_updated(&priv->temp.core[core_index]);

> +

> +	return 0;

> +}

> +

> +static int cputemp_read_string(struct device *dev, enum hwmon_sensor_types type,

> +			       u32 attr, int channel, const char **str)

> +{

> +	struct peci_cputemp *priv = dev_get_drvdata(dev);

> +

> +	if (attr != hwmon_temp_label)

> +		return -EOPNOTSUPP;

> +

> +	*str = channel < channel_core ?

> +		cputemp_label[channel] : priv->coretemp_label[channel - channel_core];

> +

> +	return 0;

> +}

> +

> +static int cputemp_read(struct device *dev, enum hwmon_sensor_types type,

> +			u32 attr, int channel, long *val)

> +{

> +	struct peci_cputemp *priv = dev_get_drvdata(dev);

> +	int ret, core_index;

> +

> +	ret = get_temp_targets(priv);

> +	if (ret)

> +		return ret;

> +

> +	switch (attr) {

> +	case hwmon_temp_input:

> +		switch (channel) {

> +		case channel_die:

> +			ret = get_die_temp(priv);

> +			if (ret)

> +				return ret;

> +

> +			*val = priv->temp.die.value;

> +			break;

> +		case channel_dts:

> +			ret = get_dts(priv);

> +			if (ret)

> +				return ret;

> +

> +			*val = priv->temp.dts.value;

> +			break;

> +		case channel_tcontrol:

> +			*val = priv->temp.tcontrol.value;

> +			break;

> +		case channel_tthrottle:

> +			*val = priv->temp.tthrottle.value;

> +			break;

> +		case channel_tjmax:

> +			*val = priv->temp.tjmax.value;

> +			break;

> +		default:

> +			core_index = channel - channel_core;

> +			ret = get_core_temp(priv, core_index);

> +			if (ret)

> +				return ret;

> +

> +			*val = priv->temp.core[core_index].value;

> +			break;

> +		}

> +		break;

> +	case hwmon_temp_max:

> +		*val = priv->temp.tcontrol.value;

> +		break;

> +	case hwmon_temp_crit:

> +		*val = priv->temp.tjmax.value;

> +		break;

> +	case hwmon_temp_crit_hyst:

> +		*val = priv->temp.tjmax.value - priv->temp.tcontrol.value;

> +		break;

> +	default:

> +		return -EOPNOTSUPP;

> +	}

> +

> +	return 0;

> +}

> +

> +static umode_t cputemp_is_visible(const void *data, enum hwmon_sensor_types type,

> +				  u32 attr, int channel)

> +{

> +	const struct peci_cputemp *priv = data;

> +

> +	if (channel > CPUTEMP_CHANNEL_NUMS)

> +		return 0;

> +

> +	if (channel < channel_core)

> +		return 0444;

> +

> +	if (test_bit(channel - channel_core, priv->core_mask))

> +		return 0444;

> +

> +	return 0;

> +}

> +

> +static int init_core_mask(struct peci_cputemp *priv)

> +{

> +	struct peci_device *peci_dev = priv->peci_dev;

> +	struct resolved_cores_reg *reg = priv->gen_info->reg;

> +	u64 core_mask;

> +	u32 data;

> +	int ret;

> +

> +	/* Get the RESOLVED_CORES register value */

> +	switch (peci_dev->info.model) {

> +	case INTEL_FAM6_ICELAKE_X:

> +	case INTEL_FAM6_ICELAKE_D:

> +		ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,

> +					     reg->func, reg->offset + 4, &data);

> +		if (ret)

> +			return ret;

> +

> +		core_mask = (u64)data << 32;

> +

> +		ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,

> +					     reg->func, reg->offset, &data);

> +		if (ret)

> +			return ret;

> +

> +		core_mask |= data;

> +

> +		break;

> +	default:

> +		ret = peci_pci_local_read(peci_dev, reg->bus, reg->dev,

> +					  reg->func, reg->offset, &data);

> +		if (ret)

> +			return ret;

> +

> +		core_mask = data;

> +

> +		break;

> +	}

> +

> +	if (!core_mask)

> +		return -EIO;

> +

> +	bitmap_from_u64(priv->core_mask, core_mask);

> +

> +	return 0;

> +}

> +

> +static int create_temp_label(struct peci_cputemp *priv)

> +{

> +	unsigned long core_max = find_last_bit(priv->core_mask, CORE_NUMS_MAX);

> +	int i;

> +

> +	priv->coretemp_label = devm_kzalloc(priv->dev, core_max * sizeof(char *), GFP_KERNEL);

> +	if (!priv->coretemp_label)

> +		return -ENOMEM;

> +

> +	for_each_set_bit(i, priv->core_mask, CORE_NUMS_MAX) {

> +		priv->coretemp_label[i] = devm_kasprintf(priv->dev, GFP_KERNEL, "Core %d", i);

> +		if (!priv->coretemp_label[i])

> +			return -ENOMEM;

> +	}

> +

> +	return 0;

> +}

> +

> +static void check_resolved_cores(struct peci_cputemp *priv)

> +{

> +	int ret;

> +

> +	ret = init_core_mask(priv);

> +	if (ret)

> +		return;

> +

> +	ret = create_temp_label(priv);

> +	if (ret)

> +		bitmap_zero(priv->core_mask, CORE_NUMS_MAX);


This needs a comment explaining why it is ok to ignore the above errors.

I understand it is because the non-core data will still be available.
Yet, it still needs to be explained so others don't need to examine
the code to figure out the reason.

> +}

> +

> +static const struct hwmon_ops peci_cputemp_ops = {

> +	.is_visible = cputemp_is_visible,

> +	.read_string = cputemp_read_string,

> +	.read = cputemp_read,

> +};

> +

> +static const u32 peci_cputemp_temp_channel_config[] = {

> +	/* Die temperature */

> +	HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | HWMON_T_CRIT_HYST,

> +	/* DTS margin */

> +	HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | HWMON_T_CRIT_HYST,

> +	/* Tcontrol temperature */

> +	HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,

> +	/* Tthrottle temperature */

> +	HWMON_T_LABEL | HWMON_T_INPUT,

> +	/* Tjmax temperature */

> +	HWMON_T_LABEL | HWMON_T_INPUT,

> +	/* Core temperature - for all core channels */

> +	[channel_core ... CPUTEMP_CHANNEL_NUMS - 1] = HWMON_T_LABEL | HWMON_T_INPUT,

> +	0

> +};

> +

> +static const struct hwmon_channel_info peci_cputemp_temp_channel = {

> +	.type = hwmon_temp,

> +	.config = peci_cputemp_temp_channel_config,

> +};

> +

> +static const struct hwmon_channel_info *peci_cputemp_info[] = {

> +	&peci_cputemp_temp_channel,

> +	NULL

> +};

> +

> +static const struct hwmon_chip_info peci_cputemp_chip_info = {

> +	.ops = &peci_cputemp_ops,

> +	.info = peci_cputemp_info,

> +};

> +

> +static int peci_cputemp_probe(struct auxiliary_device *adev,

> +			      const struct auxiliary_device_id *id)

> +{

> +	struct device *dev = &adev->dev;

> +	struct peci_device *peci_dev = to_peci_device(dev->parent);

> +	struct peci_cputemp *priv;

> +	struct device *hwmon_dev;

> +

> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);

> +	if (!priv)

> +		return -ENOMEM;

> +

> +	priv->name = devm_kasprintf(dev, GFP_KERNEL, "peci_cputemp.cpu%d",

> +				    peci_dev->info.socket_id);

> +	if (!priv->name)

> +		return -ENOMEM;

> +

> +	dev_set_drvdata(dev, priv);


What is this used for ?

> +	priv->dev = dev;

> +	priv->peci_dev = peci_dev;

> +	priv->gen_info = (const struct cpu_info *)id->driver_data;

> +

> +	check_resolved_cores(priv);

> +

> +	hwmon_dev = devm_hwmon_device_register_with_info(priv->dev, priv->name,

> +							 priv, &peci_cputemp_chip_info, NULL);

> +

> +	return PTR_ERR_OR_ZERO(hwmon_dev);

> +}

> +

> +static struct resolved_cores_reg resolved_cores_reg_hsx = {

> +	.bus = 1,

> +	.dev = 30,

> +	.func = 3,

> +	.offset = 0xb4,

> +};

> +

> +static struct resolved_cores_reg resolved_cores_reg_icx = {

> +	.bus = 14,

> +	.dev = 30,

> +	.func = 3,

> +	.offset = 0xd0,

> +};


Please explain those magic numbers.

> +

> +static const struct cpu_info cpu_hsx = {

> +	.reg		= &resolved_cores_reg_hsx,

> +	.min_peci_revision = 0x30,

> +};

> +

> +static const struct cpu_info cpu_icx = {

> +	.reg		= &resolved_cores_reg_icx,

> +	.min_peci_revision = 0x40,

> +};

> +

> +static const struct auxiliary_device_id peci_cputemp_ids[] = {

> +	{

> +		.name = "peci_cpu.cputemp.hsx",

> +		.driver_data = (kernel_ulong_t)&cpu_hsx,

> +	},

> +	{

> +		.name = "peci_cpu.cputemp.bdx",

> +		.driver_data = (kernel_ulong_t)&cpu_hsx,

> +	},

> +	{

> +		.name = "peci_cpu.cputemp.bdxd",

> +		.driver_data = (kernel_ulong_t)&cpu_hsx,

> +	},

> +	{

> +		.name = "peci_cpu.cputemp.skx",

> +		.driver_data = (kernel_ulong_t)&cpu_hsx,

> +	},

> +	{

> +		.name = "peci_cpu.cputemp.icx",

> +		.driver_data = (kernel_ulong_t)&cpu_icx,

> +	},

> +	{

> +		.name = "peci_cpu.cputemp.icxd",

> +		.driver_data = (kernel_ulong_t)&cpu_icx,

> +	},

> +	{ }

> +};

> +MODULE_DEVICE_TABLE(auxiliary, peci_cputemp_ids);

> +

> +static struct auxiliary_driver peci_cputemp_driver = {

> +	.probe		= peci_cputemp_probe,

> +	.id_table	= peci_cputemp_ids,

> +};

> +

> +module_auxiliary_driver(peci_cputemp_driver);

> +

> +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");

> +MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska@intel.com>");

> +MODULE_DESCRIPTION("PECI cputemp driver");

> +MODULE_LICENSE("GPL");

> +MODULE_IMPORT_NS(PECI_CPU);
Iwona Winiarska July 19, 2021, 8:12 p.m. UTC | #2
On Thu, 2021-07-15 at 10:45 -0700, Guenter Roeck wrote:
> On Tue, Jul 13, 2021 at 12:04:44AM +0200, Iwona Winiarska wrote:

> > Add peci-cputemp driver for Digital Thermal Sensor (DTS) thermal

> > readings of the processor package and processor cores that are

> > accessible via the PECI interface.

> > 

> > The main use case for the driver (and PECI interface) is out-of-band

> > management, where we're able to obtain the DTS readings from an external

> > entity connected with PECI, e.g. BMC on server platforms.

> > 

> > Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

> > Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

> > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>

> > Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

> 

> Note: Due to lack of revision information, this review does not take

> any previous discussions into account, and it may miss critical information.

> For a final review I'll have to compare the code against earlier versions

> to determine if there are any relevant changes and if all comments

> have been addressed. This may take some time.

> 


Thank you for taking a look at the patches.

Unfortunately, the changes needed in the PECI-core part impacted HWMON as well.
I tried to minimize refactoring, but changes are rather big (in my opinion -
which is why I assumed that full changelog won't be helpful).
After taking over the series I noted your comments to v11. The changes you
requested are either already there or the code no longer exists due to
refactoring (but after going through that again, I noticed the duplicated
CORE_NUMS_MAX define - I'll remove it in v2).

> > ---

> >  MAINTAINERS                  |   7 +

> >  drivers/hwmon/Kconfig        |   2 +

> >  drivers/hwmon/Makefile       |   1 +

> >  drivers/hwmon/peci/Kconfig   |  18 ++

> >  drivers/hwmon/peci/Makefile  |   5 +

> >  drivers/hwmon/peci/common.h  |  46 ++++

> >  drivers/hwmon/peci/cputemp.c | 503 +++++++++++++++++++++++++++++++++++

> >  7 files changed, 582 insertions(+)

> >  create mode 100644 drivers/hwmon/peci/Kconfig

> >  create mode 100644 drivers/hwmon/peci/Makefile

> >  create mode 100644 drivers/hwmon/peci/common.h

> >  create mode 100644 drivers/hwmon/peci/cputemp.c

> > 

> > diff --git a/MAINTAINERS b/MAINTAINERS

> > index f47b5f634293..35ba9e3646bd 100644

> > --- a/MAINTAINERS

> > +++ b/MAINTAINERS

> > @@ -14504,6 +14504,13 @@ L:     platform-driver-x86@vger.kernel.org

> >  S:     Maintained

> >  F:     drivers/platform/x86/peaq-wmi.c

> >  

> > +PECI HARDWARE MONITORING DRIVERS

> > +M:     Iwona Winiarska <iwona.winiarska@intel.com>

> > +R:     Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

> > +L:     linux-hwmon@vger.kernel.org

> > +S:     Supported

> > +F:     drivers/hwmon/peci/

> > +

> >  PECI SUBSYSTEM

> >  M:     Iwona Winiarska <iwona.winiarska@intel.com>

> >  R:     Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig

> > index e3675377bc5d..61c0e3404415 100644

> > --- a/drivers/hwmon/Kconfig

> > +++ b/drivers/hwmon/Kconfig

> > @@ -1507,6 +1507,8 @@ config SENSORS_PCF8591

> >           These devices are hard to detect and rarely found on mainstream

> >           hardware. If unsure, say N.

> >  

> > +source "drivers/hwmon/peci/Kconfig"

> > +

> >  source "drivers/hwmon/pmbus/Kconfig"

> >  

> >  config SENSORS_PWM_FAN

> > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile

> > index d712c61c1f5e..f52331f212ed 100644

> > --- a/drivers/hwmon/Makefile

> > +++ b/drivers/hwmon/Makefile

> > @@ -202,6 +202,7 @@ obj-$(CONFIG_SENSORS_WM8350)        += wm8350-hwmon.o

> >  obj-$(CONFIG_SENSORS_XGENE)    += xgene-hwmon.o

> >  

> >  obj-$(CONFIG_SENSORS_OCC)      += occ/

> > +obj-$(CONFIG_SENSORS_PECI)     += peci/

> >  obj-$(CONFIG_PMBUS)            += pmbus/

> >  

> >  ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG

> > diff --git a/drivers/hwmon/peci/Kconfig b/drivers/hwmon/peci/Kconfig

> > new file mode 100644

> > index 000000000000..e10eed68d70a

> > --- /dev/null

> > +++ b/drivers/hwmon/peci/Kconfig

> > @@ -0,0 +1,18 @@

> > +# SPDX-License-Identifier: GPL-2.0-only

> > +

> > +config SENSORS_PECI_CPUTEMP

> > +       tristate "PECI CPU temperature monitoring client"

> > +       depends on PECI

> > +       select SENSORS_PECI

> > +       select PECI_CPU

> > +       help

> > +         If you say yes here you get support for the generic Intel PECI

> > +         cputemp driver which provides Digital Thermal Sensor (DTS) thermal

> > +         readings of the CPU package and CPU cores that are accessible via

> > +         the processor PECI interface.

> > +

> > +         This driver can also be built as a module. If so, the module

> > +         will be called peci-cputemp.

> > +

> > +config SENSORS_PECI

> > +       tristate

> > diff --git a/drivers/hwmon/peci/Makefile b/drivers/hwmon/peci/Makefile

> > new file mode 100644

> > index 000000000000..e8a0ada5ab1f

> > --- /dev/null

> > +++ b/drivers/hwmon/peci/Makefile

> > @@ -0,0 +1,5 @@

> > +# SPDX-License-Identifier: GPL-2.0-only

> > +

> > +peci-cputemp-y := cputemp.o

> > +

> > +obj-$(CONFIG_SENSORS_PECI_CPUTEMP)     += peci-cputemp.o

> > diff --git a/drivers/hwmon/peci/common.h b/drivers/hwmon/peci/common.h

> > new file mode 100644

> > index 000000000000..54580c100d06

> > --- /dev/null

> > +++ b/drivers/hwmon/peci/common.h

> > @@ -0,0 +1,46 @@

> > +/* SPDX-License-Identifier: GPL-2.0-only */

> > +/* Copyright (c) 2021 Intel Corporation */

> > +

> > +#include <linux/types.h>

> > +

> > +#ifndef __PECI_HWMON_COMMON_H

> > +#define __PECI_HWMON_COMMON_H

> > +

> > +#define UPDATE_INTERVAL_DEFAULT                HZ

> > +

> > +/**

> > + * struct peci_sensor_data - PECI sensor information

> > + * @valid: flag to indicate the sensor value is valid

> > + * @value: sensor value in milli units

> > + * @last_updated: time of the last update in jiffies

> > + */

> > +struct peci_sensor_data {

> > +       unsigned int valid;

> 

> Please use bool.

> 


Ok.

> > +       s32 value;

> > +       unsigned long last_updated;

> > +};

> > +

> > +/**

> > + * peci_sensor_need_update() - check whether sensor update is needed or not

> > + * @sensor: pointer to sensor data struct

> > + *

> > + * Return: true if update is needed, false if not.

> > + */

> > +

> > +static inline bool peci_sensor_need_update(struct peci_sensor_data *sensor)

> > +{

> > +       return !sensor->valid ||

> > +              time_after(jiffies, sensor->last_updated +

> > UPDATE_INTERVAL_DEFAULT);

> 

> 

> Since there is no other update interval, _DEFAULT does not have any value.

> Please drop. Also, please select a prefix such as PECI_.

> 


Sure - I'll go with PECI_HWMON_UPDATE_INTERVAL.

> > +}

> > +

> > +/**

> > + * peci_sensor_mark_updated() - mark the sensor is updated

> > + * @sensor: pointer to sensor data struct

> > + */

> > +static inline void peci_sensor_mark_updated(struct peci_sensor_data *sensor)

> > +{

> > +       sensor->valid = 1;

> 

>                 = true;

> 


Ok.

> > +       sensor->last_updated = jiffies;

> > +}

> > +

> > +#endif /* __PECI_HWMON_COMMON_H */

> > diff --git a/drivers/hwmon/peci/cputemp.c b/drivers/hwmon/peci/cputemp.c

> > new file mode 100644

> > index 000000000000..56a526471687

> > --- /dev/null

> > +++ b/drivers/hwmon/peci/cputemp.c

> > @@ -0,0 +1,503 @@

> > +// SPDX-License-Identifier: GPL-2.0-only

> > +// Copyright (c) 2018-2021 Intel Corporation

> > +

> > +#include <linux/auxiliary_bus.h>

> > +#include <linux/bitfield.h>

> > +#include <linux/bitops.h>

> > +#include <linux/hwmon.h>

> > +#include <linux/jiffies.h>

> > +#include <linux/module.h>

> > +#include <linux/peci.h>

> > +#include <linux/peci-cpu.h>

> > +#include <linux/units.h>

> > +#include <linux/x86/intel-family.h>

> > +

> > +#include "common.h"

> > +

> > +#define CORE_NUMS_MAX          64

> > +

> > +#define DEFAULT_CHANNEL_NUMS   5

> > +#define CORETEMP_CHANNEL_NUMS  CORE_NUMS_MAX

> > +#define CPUTEMP_CHANNEL_NUMS   (DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)

> > +

> > +#define TEMP_TARGET_FAN_TEMP_MASK      GENMASK(15, 8)

> > +#define TEMP_TARGET_REF_TEMP_MASK      GENMASK(23, 16)

> > +#define TEMP_TARGET_TJ_OFFSET_MASK     GENMASK(29, 24)

> > +

> > +#define DTS_MARGIN_MASK                GENMASK(15, 0)

> > +#define PCS_MODULE_TEMP_MASK   GENMASK(15, 0)

> > +

> > +#define DTS_FIXED_POINT_FRACTION       64

> > +

> > +struct resolved_cores_reg {

> > +       u8 bus;

> > +       u8 dev;

> > +       u8 func;

> > +       u8 offset;

> > +};

> > +

> > +struct cpu_info {

> > +       struct resolved_cores_reg *reg;

> > +       u8 min_peci_revision;

> > +};

> > +

> > +struct peci_cputemp {

> > +       struct peci_device *peci_dev;

> > +       struct device *dev;

> > +       const char *name;

> > +       const struct cpu_info *gen_info;

> > +       struct {

> > +               struct peci_sensor_data die;

> > +               struct peci_sensor_data dts;

> > +               struct peci_sensor_data tcontrol;

> > +               struct peci_sensor_data tthrottle;

> > +               struct peci_sensor_data tjmax;

> > +               struct peci_sensor_data core[CORETEMP_CHANNEL_NUMS];

> > +       } temp;

> > +       const char **coretemp_label;

> > +       DECLARE_BITMAP(core_mask, CORE_NUMS_MAX);

> > +};

> > +

> > +enum cputemp_channels {

> > +       channel_die,

> > +       channel_dts,

> > +       channel_tcontrol,

> > +       channel_tthrottle,

> > +       channel_tjmax,

> > +       channel_core,

> > +};

> > +

> > +static const char *cputemp_label[DEFAULT_CHANNEL_NUMS] = {

> > +       "Die",

> > +       "DTS",

> > +       "Tcontrol",

> > +       "Tthrottle",

> > +       "Tjmax",

> > +};

> > +

> > +static int get_temp_targets(struct peci_cputemp *priv)

> > +{

> > +       s32 tthrottle_offset, tcontrol_margin;

> > +       u32 pcs;

> > +       int ret;

> > +

> > +       /*

> > +        * Just use only the tcontrol marker to determine if target values

> > need

> > +        * update.

> > +        */

> > +       if (!peci_sensor_need_update(&priv->temp.tcontrol))

> > +               return 0;

> > +

> True for the entire code: Please explain how this avoids race conditions

> without locking between the condition check here and the call to

> peci_sensor_mark_updated() below. The explanation needs to be added

> as comment into the code for later reference.

> 


You're right, there is a race here that may cause PECI command to be triggered
more than once. It doesn't have any impact on correctness though.
I could add a comment explaining that, but I guess just adding a mutex to avoid
the race makes more sense. 

> > +       ret = peci_pcs_read(priv->peci_dev, PECI_PCS_TEMP_TARGET, 0, &pcs);

> > +       if (ret)

> > +               return ret;

> > +

> > +       priv->temp.tjmax.value = FIELD_GET(TEMP_TARGET_REF_TEMP_MASK, pcs) *

> > MILLIDEGREE_PER_DEGREE;

> > +

> > +       tcontrol_margin = FIELD_GET(TEMP_TARGET_FAN_TEMP_MASK, pcs);

> > +       tcontrol_margin = sign_extend32(tcontrol_margin, 7) *

> > MILLIDEGREE_PER_DEGREE;

> > +       priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;

> > +

> > +       tthrottle_offset = FIELD_GET(TEMP_TARGET_TJ_OFFSET_MASK, pcs) *

> > MILLIDEGREE_PER_DEGREE;

> > +       priv->temp.tthrottle.value = priv->temp.tjmax.value -

> > tthrottle_offset;

> > +

> > +       peci_sensor_mark_updated(&priv->temp.tcontrol);

> > +

> > +       return 0;

> > +}

> > +

> > +/*

> > + * Processors return a value of DTS reading in S10.6 fixed point format

> > + * (sign, 10 bits signed integer value, 6 bits fractional).

> > + * Error codes:

> > + *   0x8000: General sensor error

> > + *   0x8001: Reserved

> > + *   0x8002: Underflow on reading value

> > + *   0x8003-0x81ff: Reserved

> > + */

> > +static bool dts_valid(s32 val)

> > +{

> > +       return val < 0x8000 || val > 0x81ff;

> > +}

> > +

> > +static s32 dts_to_millidegree(s32 val)

> > +{

> > +       return sign_extend32(val, 15) * MILLIDEGREE_PER_DEGREE /

> > DTS_FIXED_POINT_FRACTION;

> > +}

> > +

> > +static int get_die_temp(struct peci_cputemp *priv)

> > +{

> > +       s16 temp;

> > +       int ret;

> > +

> > +       if (!peci_sensor_need_update(&priv->temp.die))

> > +               return 0;

> > +

> > +       ret = peci_temp_read(priv->peci_dev, &temp);

> > +       if (ret)

> > +               return ret;

> > +

> > +       if (!dts_valid(temp))

> > +               return -EIO;

> > +

> > +       /* Note that the tjmax should be available before calling it */

> > +       priv->temp.die.value = priv->temp.tjmax.value +

> > dts_to_millidegree(temp);

> > +

> > +       peci_sensor_mark_updated(&priv->temp.die);

> > +

> > +       return 0;

> > +}

> > +

> > +static int get_dts(struct peci_cputemp *priv)

> > +{

> > +       s32 dts_margin;

> > +       u32 pcs;

> > +       int ret;

> > +

> > +       if (!peci_sensor_need_update(&priv->temp.dts))

> > +               return 0;

> > +

> > +       ret = peci_pcs_read(priv->peci_dev, PECI_PCS_THERMAL_MARGIN, 0, &pcs);

> > +       if (ret)

> > +               return ret;

> > +

> > +       dts_margin = FIELD_GET(DTS_MARGIN_MASK, pcs);

> > +       if (!dts_valid(dts_margin))

> > +               return -EIO;

> > +

> > +       /* Note that the tcontrol should be available before calling it */

> > +       priv->temp.dts.value = priv->temp.tcontrol.value -

> > dts_to_millidegree(dts_margin);

> > +

> > +       peci_sensor_mark_updated(&priv->temp.dts);

> > +

> > +       return 0;

> > +}

> > +

> > +static int get_core_temp(struct peci_cputemp *priv, int core_index)

> > +{

> > +       s32 core_dts_margin;

> > +       u32 pcs;

> > +       int ret;

> > +

> > +       if (!peci_sensor_need_update(&priv->temp.core[core_index]))

> > +               return 0;

> > +

> > +       ret = peci_pcs_read(priv->peci_dev, PECI_PCS_MODULE_TEMP, core_index,

> > &pcs);

> > +       if (ret)

> > +               return ret;

> > +

> > +       core_dts_margin = FIELD_GET(PCS_MODULE_TEMP_MASK, pcs);

> > +       if (!dts_valid(core_dts_margin))

> > +               return -EIO;

> > +

> > +       /* Note that the tjmax should be available before calling it */

> > +       priv->temp.core[core_index].value =

> > +               priv->temp.tjmax.value + dts_to_millidegree(core_dts_margin);

> > +

> > +       peci_sensor_mark_updated(&priv->temp.core[core_index]);

> > +

> > +       return 0;

> > +}

> > +

> > +static int cputemp_read_string(struct device *dev, enum hwmon_sensor_types

> > type,

> > +                              u32 attr, int channel, const char **str)

> > +{

> > +       struct peci_cputemp *priv = dev_get_drvdata(dev);

> > +

> > +       if (attr != hwmon_temp_label)

> > +               return -EOPNOTSUPP;

> > +

> > +       *str = channel < channel_core ?

> > +               cputemp_label[channel] : priv->coretemp_label[channel -

> > channel_core];

> > +

> > +       return 0;

> > +}

> > +

> > +static int cputemp_read(struct device *dev, enum hwmon_sensor_types type,

> > +                       u32 attr, int channel, long *val)

> > +{

> > +       struct peci_cputemp *priv = dev_get_drvdata(dev);

> > +       int ret, core_index;

> > +

> > +       ret = get_temp_targets(priv);

> > +       if (ret)

> > +               return ret;

> > +

> > +       switch (attr) {

> > +       case hwmon_temp_input:

> > +               switch (channel) {

> > +               case channel_die:

> > +                       ret = get_die_temp(priv);

> > +                       if (ret)

> > +                               return ret;

> > +

> > +                       *val = priv->temp.die.value;

> > +                       break;

> > +               case channel_dts:

> > +                       ret = get_dts(priv);

> > +                       if (ret)

> > +                               return ret;

> > +

> > +                       *val = priv->temp.dts.value;

> > +                       break;

> > +               case channel_tcontrol:

> > +                       *val = priv->temp.tcontrol.value;

> > +                       break;

> > +               case channel_tthrottle:

> > +                       *val = priv->temp.tthrottle.value;

> > +                       break;

> > +               case channel_tjmax:

> > +                       *val = priv->temp.tjmax.value;

> > +                       break;

> > +               default:

> > +                       core_index = channel - channel_core;

> > +                       ret = get_core_temp(priv, core_index);

> > +                       if (ret)

> > +                               return ret;

> > +

> > +                       *val = priv->temp.core[core_index].value;

> > +                       break;

> > +               }

> > +               break;

> > +       case hwmon_temp_max:

> > +               *val = priv->temp.tcontrol.value;

> > +               break;

> > +       case hwmon_temp_crit:

> > +               *val = priv->temp.tjmax.value;

> > +               break;

> > +       case hwmon_temp_crit_hyst:

> > +               *val = priv->temp.tjmax.value - priv->temp.tcontrol.value;

> > +               break;

> > +       default:

> > +               return -EOPNOTSUPP;

> > +       }

> > +

> > +       return 0;

> > +}

> > +

> > +static umode_t cputemp_is_visible(const void *data, enum hwmon_sensor_types

> > type,

> > +                                 u32 attr, int channel)

> > +{

> > +       const struct peci_cputemp *priv = data;

> > +

> > +       if (channel > CPUTEMP_CHANNEL_NUMS)

> > +               return 0;

> > +

> > +       if (channel < channel_core)

> > +               return 0444;

> > +

> > +       if (test_bit(channel - channel_core, priv->core_mask))

> > +               return 0444;

> > +

> > +       return 0;

> > +}

> > +

> > +static int init_core_mask(struct peci_cputemp *priv)

> > +{

> > +       struct peci_device *peci_dev = priv->peci_dev;

> > +       struct resolved_cores_reg *reg = priv->gen_info->reg;

> > +       u64 core_mask;

> > +       u32 data;

> > +       int ret;

> > +

> > +       /* Get the RESOLVED_CORES register value */

> > +       switch (peci_dev->info.model) {

> > +       case INTEL_FAM6_ICELAKE_X:

> > +       case INTEL_FAM6_ICELAKE_D:

> > +               ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,

> > +                                            reg->func, reg->offset + 4,

> > &data);

> > +               if (ret)

> > +                       return ret;

> > +

> > +               core_mask = (u64)data << 32;

> > +

> > +               ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,

> > +                                            reg->func, reg->offset, &data);

> > +               if (ret)

> > +                       return ret;

> > +

> > +               core_mask |= data;

> > +

> > +               break;

> > +       default:

> > +               ret = peci_pci_local_read(peci_dev, reg->bus, reg->dev,

> > +                                         reg->func, reg->offset, &data);

> > +               if (ret)

> > +                       return ret;

> > +

> > +               core_mask = data;

> > +

> > +               break;

> > +       }

> > +

> > +       if (!core_mask)

> > +               return -EIO;

> > +

> > +       bitmap_from_u64(priv->core_mask, core_mask);

> > +

> > +       return 0;

> > +}

> > +

> > +static int create_temp_label(struct peci_cputemp *priv)

> > +{

> > +       unsigned long core_max = find_last_bit(priv->core_mask,

> > CORE_NUMS_MAX);

> > +       int i;

> > +

> > +       priv->coretemp_label = devm_kzalloc(priv->dev, core_max * sizeof(char

> > *), GFP_KERNEL);

> > +       if (!priv->coretemp_label)

> > +               return -ENOMEM;

> > +

> > +       for_each_set_bit(i, priv->core_mask, CORE_NUMS_MAX) {

> > +               priv->coretemp_label[i] = devm_kasprintf(priv->dev,

> > GFP_KERNEL, "Core %d", i);

> > +               if (!priv->coretemp_label[i])

> > +                       return -ENOMEM;

> > +       }

> > +

> > +       return 0;

> > +}

> > +

> > +static void check_resolved_cores(struct peci_cputemp *priv)

> > +{

> > +       int ret;

> > +

> > +       ret = init_core_mask(priv);

> > +       if (ret)

> > +               return;

> > +

> > +       ret = create_temp_label(priv);

> > +       if (ret)

> > +               bitmap_zero(priv->core_mask, CORE_NUMS_MAX);

> 

> This needs a comment explaining why it is ok to ignore the above errors.

> 

> I understand it is because the non-core data will still be available.

> Yet, it still needs to be explained so others don't need to examine

> the code to figure out the reason.

> 


Right - I'll add a:
/*
 * Failure to resolve cores is non-critical, we're still able to
 * provide other sensor data.
 */

> > +}

> > +

> > +static const struct hwmon_ops peci_cputemp_ops = {

> > +       .is_visible = cputemp_is_visible,

> > +       .read_string = cputemp_read_string,

> > +       .read = cputemp_read,

> > +};

> > +

> > +static const u32 peci_cputemp_temp_channel_config[] = {

> > +       /* Die temperature */

> > +       HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |

> > HWMON_T_CRIT_HYST,

> > +       /* DTS margin */

> > +       HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |

> > HWMON_T_CRIT_HYST,

> > +       /* Tcontrol temperature */

> > +       HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,

> > +       /* Tthrottle temperature */

> > +       HWMON_T_LABEL | HWMON_T_INPUT,

> > +       /* Tjmax temperature */

> > +       HWMON_T_LABEL | HWMON_T_INPUT,

> > +       /* Core temperature - for all core channels */

> > +       [channel_core ... CPUTEMP_CHANNEL_NUMS - 1] = HWMON_T_LABEL |

> > HWMON_T_INPUT,

> > +       0

> > +};

> > +

> > +static const struct hwmon_channel_info peci_cputemp_temp_channel = {

> > +       .type = hwmon_temp,

> > +       .config = peci_cputemp_temp_channel_config,

> > +};

> > +

> > +static const struct hwmon_channel_info *peci_cputemp_info[] = {

> > +       &peci_cputemp_temp_channel,

> > +       NULL

> > +};

> > +

> > +static const struct hwmon_chip_info peci_cputemp_chip_info = {

> > +       .ops = &peci_cputemp_ops,

> > +       .info = peci_cputemp_info,

> > +};

> > +

> > +static int peci_cputemp_probe(struct auxiliary_device *adev,

> > +                             const struct auxiliary_device_id *id)

> > +{

> > +       struct device *dev = &adev->dev;

> > +       struct peci_device *peci_dev = to_peci_device(dev->parent);

> > +       struct peci_cputemp *priv;

> > +       struct device *hwmon_dev;

> > +

> > +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);

> > +       if (!priv)

> > +               return -ENOMEM;

> > +

> > +       priv->name = devm_kasprintf(dev, GFP_KERNEL, "peci_cputemp.cpu%d",

> > +                                   peci_dev->info.socket_id);

> > +       if (!priv->name)

> > +               return -ENOMEM;

> > +

> > +       dev_set_drvdata(dev, priv);

> 

> What is this used for ?


Our sensors are per-device. We need this to access the corresponding priv in
cputemp_read_string() and cputemp_read().

> 

> > +       priv->dev = dev;

> > +       priv->peci_dev = peci_dev;

> > +       priv->gen_info = (const struct cpu_info *)id->driver_data;

> > +

> > +       check_resolved_cores(priv);

> > +

> > +       hwmon_dev = devm_hwmon_device_register_with_info(priv->dev, priv-

> > >name,

> > +                                                        priv,

> > &peci_cputemp_chip_info, NULL);

> > +

> > +       return PTR_ERR_OR_ZERO(hwmon_dev);

> > +}

> > +

> > +static struct resolved_cores_reg resolved_cores_reg_hsx = {

> > +       .bus = 1,

> > +       .dev = 30,

> > +       .func = 3,

> > +       .offset = 0xb4,

> > +};

> > +

> > +static struct resolved_cores_reg resolved_cores_reg_icx = {

> > +       .bus = 14,

> > +       .dev = 30,

> > +       .func = 3,

> > +       .offset = 0xd0,

> > +};

> 

> Please explain those magic numbers.

> 


Those magic numbers refer to BDF (bus, device, function) and offset of the PCI
config register (RESOLVED_CORES_CFG) that can be accessed via PECI to read
resolved cores configuration.
Unfortunately, the values are just platform-specific magic numbers.
Do you think this should be explained with an additional comment?

Thank you
-Iwona

> > +

> > +static const struct cpu_info cpu_hsx = {

> > +       .reg            = &resolved_cores_reg_hsx,

> > +       .min_peci_revision = 0x30,

> > +};

> > +

> > +static const struct cpu_info cpu_icx = {

> > +       .reg            = &resolved_cores_reg_icx,

> > +       .min_peci_revision = 0x40,

> > +};

> > +

> > +static const struct auxiliary_device_id peci_cputemp_ids[] = {

> > +       {

> > +               .name = "peci_cpu.cputemp.hsx",

> > +               .driver_data = (kernel_ulong_t)&cpu_hsx,

> > +       },

> > +       {

> > +               .name = "peci_cpu.cputemp.bdx",

> > +               .driver_data = (kernel_ulong_t)&cpu_hsx,

> > +       },

> > +       {

> > +               .name = "peci_cpu.cputemp.bdxd",

> > +               .driver_data = (kernel_ulong_t)&cpu_hsx,

> > +       },

> > +       {

> > +               .name = "peci_cpu.cputemp.skx",

> > +               .driver_data = (kernel_ulong_t)&cpu_hsx,

> > +       },

> > +       {

> > +               .name = "peci_cpu.cputemp.icx",

> > +               .driver_data = (kernel_ulong_t)&cpu_icx,

> > +       },

> > +       {

> > +               .name = "peci_cpu.cputemp.icxd",

> > +               .driver_data = (kernel_ulong_t)&cpu_icx,

> > +       },

> > +       { }

> > +};

> > +MODULE_DEVICE_TABLE(auxiliary, peci_cputemp_ids);

> > +

> > +static struct auxiliary_driver peci_cputemp_driver = {

> > +       .probe          = peci_cputemp_probe,

> > +       .id_table       = peci_cputemp_ids,

> > +};

> > +

> > +module_auxiliary_driver(peci_cputemp_driver);

> > +

> > +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");

> > +MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska@intel.com>");

> > +MODULE_DESCRIPTION("PECI cputemp driver");

> > +MODULE_LICENSE("GPL");

> > +MODULE_IMPORT_NS(PECI_CPU);
Guenter Roeck July 19, 2021, 8:35 p.m. UTC | #3
On Mon, Jul 19, 2021 at 08:12:54PM +0000, Winiarska, Iwona wrote:

> > > +static const char *cputemp_label[DEFAULT_CHANNEL_NUMS] = {

> > > +       "Die",

> > > +       "DTS",

> > > +       "Tcontrol",

> > > +       "Tthrottle",

> > > +       "Tjmax",

> > > +};

> > > +

> > > +static int get_temp_targets(struct peci_cputemp *priv)

> > > +{

> > > +       s32 tthrottle_offset, tcontrol_margin;

> > > +       u32 pcs;

> > > +       int ret;

> > > +

> > > +       /*

> > > +        * Just use only the tcontrol marker to determine if target values

> > > need

> > > +        * update.

> > > +        */

> > > +       if (!peci_sensor_need_update(&priv->temp.tcontrol))

> > > +               return 0;

> > > +

> > True for the entire code: Please explain how this avoids race conditions

> > without locking between the condition check here and the call to

> > peci_sensor_mark_updated() below. The explanation needs to be added

> > as comment into the code for later reference.

> > 

> 

> You're right, there is a race here that may cause PECI command to be triggered

> more than once. It doesn't have any impact on correctness though.


That is only correct if multiple read operations of PECI_PCS_TEMP_TARGET
always return the same value. If so, reading those values multiple times
would not make sense. Instead, the values could be read once and cached.
If PECI_PCS_TEMP_TARGET can return different values each time it is called,
the lack of mutex protection could result in inconsistent values for
priv->temp.tjmax.value, priv->temp.tcontrol.value, and
priv->temp.tthrottle.value.

So either this needs a mutex, or the code should be changed to read the
static values only once.

You could instead add a comment stating that multiple unprotected reads
are redundant because the returned data is static, that parallel reads
are thus not racy, and that a mutex is therefore not needed, but I won't
accept such code.

> I could add a comment explaining that, but I guess just adding a mutex to avoid

> the race makes more sense. 

> 

> > > +       ret = peci_pcs_read(priv->peci_dev, PECI_PCS_TEMP_TARGET, 0, &pcs);

> > > +       if (ret)

> > > +               return ret;

> > > +

> > > +       priv->temp.tjmax.value = FIELD_GET(TEMP_TARGET_REF_TEMP_MASK, pcs) *

> > > MILLIDEGREE_PER_DEGREE;

> > > +

> > > +       tcontrol_margin = FIELD_GET(TEMP_TARGET_FAN_TEMP_MASK, pcs);

> > > +       tcontrol_margin = sign_extend32(tcontrol_margin, 7) *

> > > MILLIDEGREE_PER_DEGREE;

> > > +       priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;

> > > +

> > > +       tthrottle_offset = FIELD_GET(TEMP_TARGET_TJ_OFFSET_MASK, pcs) *

> > > MILLIDEGREE_PER_DEGREE;

> > > +       priv->temp.tthrottle.value = priv->temp.tjmax.value -

> > > tthrottle_offset;

> > > +

> > > +       peci_sensor_mark_updated(&priv->temp.tcontrol);

> > > +

> > > +       return 0;

> > > +}

> > > +

> > > +/*

> > > + * Processors return a value of DTS reading in S10.6 fixed point format

> > > + * (sign, 10 bits signed integer value, 6 bits fractional).

> > > + * Error codes:

> > > + *   0x8000: General sensor error

> > > + *   0x8001: Reserved

> > > + *   0x8002: Underflow on reading value

> > > + *   0x8003-0x81ff: Reserved

> > > + */

> > > +static bool dts_valid(s32 val)

> > > +{

> > > +       return val < 0x8000 || val > 0x81ff;

> > > +}

> > > +

> > > +static s32 dts_to_millidegree(s32 val)

> > > +{

> > > +       return sign_extend32(val, 15) * MILLIDEGREE_PER_DEGREE /

> > > DTS_FIXED_POINT_FRACTION;

> > > +}

> > > +

> > > +static int get_die_temp(struct peci_cputemp *priv)

> > > +{

> > > +       s16 temp;

> > > +       int ret;

> > > +

> > > +       if (!peci_sensor_need_update(&priv->temp.die))

> > > +               return 0;

> > > +

> > > +       ret = peci_temp_read(priv->peci_dev, &temp);

> > > +       if (ret)

> > > +               return ret;

> > > +

> > > +       if (!dts_valid(temp))

> > > +               return -EIO;

> > > +

> > > +       /* Note that the tjmax should be available before calling it */

> > > +       priv->temp.die.value = priv->temp.tjmax.value +

> > > dts_to_millidegree(temp);

> > > +

> > > +       peci_sensor_mark_updated(&priv->temp.die);


The same is true here: Either the value returned from peci_temp_read()
is static (which seems unlikely), or there is a race between reading
the temperature, storing it in priv->temp.die.value, and setting the
update flag. With the current code, there is no guarantee that the
stored value is the value that was read by the thread that sets the
updated flag. One could argue that it doesn't really matter because it
is irrelevant which thread stores the temperature and which thread sets
the updated flag, but that is really bad coding style, and I won't
accept it.

This is true for all code which reads a value from the chip, stores
it locally, and then sets the updated flag.

> > > +

> > > +       return 0;

> > > +}

> > > +

> > > +static int get_dts(struct peci_cputemp *priv)

> > > +{

> > > +       s32 dts_margin;

> > > +       u32 pcs;

> > > +       int ret;

> > > +

> > > +       if (!peci_sensor_need_update(&priv->temp.dts))

> > > +               return 0;

> > > +

> > > +       ret = peci_pcs_read(priv->peci_dev, PECI_PCS_THERMAL_MARGIN, 0, &pcs);

> > > +       if (ret)

> > > +               return ret;

> > > +

> > > +       dts_margin = FIELD_GET(DTS_MARGIN_MASK, pcs);

> > > +       if (!dts_valid(dts_margin))

> > > +               return -EIO;

> > > +

> > > +       /* Note that the tcontrol should be available before calling it */

> > > +       priv->temp.dts.value = priv->temp.tcontrol.value -

> > > dts_to_millidegree(dts_margin);

> > > +

> > > +       peci_sensor_mark_updated(&priv->temp.dts);

> > > +

> > > +       return 0;

> > > +}

> > > +

> > > +static int get_core_temp(struct peci_cputemp *priv, int core_index)

> > > +{

> > > +       s32 core_dts_margin;

> > > +       u32 pcs;

> > > +       int ret;

> > > +

> > > +       if (!peci_sensor_need_update(&priv->temp.core[core_index]))

> > > +               return 0;

> > > +

> > > +       ret = peci_pcs_read(priv->peci_dev, PECI_PCS_MODULE_TEMP, core_index,

> > > &pcs);

> > > +       if (ret)

> > > +               return ret;

> > > +

> > > +       core_dts_margin = FIELD_GET(PCS_MODULE_TEMP_MASK, pcs);

> > > +       if (!dts_valid(core_dts_margin))

> > > +               return -EIO;

> > > +

> > > +       /* Note that the tjmax should be available before calling it */

> > > +       priv->temp.core[core_index].value =

> > > +               priv->temp.tjmax.value + dts_to_millidegree(core_dts_margin);

> > > +

> > > +       peci_sensor_mark_updated(&priv->temp.core[core_index]);

> > > +

> > > +       return 0;

> > > +}

> > > +

> > > +static int cputemp_read_string(struct device *dev, enum hwmon_sensor_types

> > > type,

> > > +                              u32 attr, int channel, const char **str)

> > > +{

> > > +       struct peci_cputemp *priv = dev_get_drvdata(dev);

> > > +

> > > +       if (attr != hwmon_temp_label)

> > > +               return -EOPNOTSUPP;

> > > +

> > > +       *str = channel < channel_core ?

> > > +               cputemp_label[channel] : priv->coretemp_label[channel -

> > > channel_core];

> > > +

> > > +       return 0;

> > > +}

> > > +

> > > +static int cputemp_read(struct device *dev, enum hwmon_sensor_types type,

> > > +                       u32 attr, int channel, long *val)

> > > +{

> > > +       struct peci_cputemp *priv = dev_get_drvdata(dev);

> > > +       int ret, core_index;

> > > +

> > > +       ret = get_temp_targets(priv);

> > > +       if (ret)

> > > +               return ret;

> > > +

> > > +       switch (attr) {

> > > +       case hwmon_temp_input:

> > > +               switch (channel) {

> > > +               case channel_die:

> > > +                       ret = get_die_temp(priv);

> > > +                       if (ret)

> > > +                               return ret;

> > > +

> > > +                       *val = priv->temp.die.value;

> > > +                       break;

> > > +               case channel_dts:

> > > +                       ret = get_dts(priv);

> > > +                       if (ret)

> > > +                               return ret;

> > > +

> > > +                       *val = priv->temp.dts.value;

> > > +                       break;

> > > +               case channel_tcontrol:

> > > +                       *val = priv->temp.tcontrol.value;

> > > +                       break;

> > > +               case channel_tthrottle:

> > > +                       *val = priv->temp.tthrottle.value;

> > > +                       break;

> > > +               case channel_tjmax:

> > > +                       *val = priv->temp.tjmax.value;

> > > +                       break;

> > > +               default:

> > > +                       core_index = channel - channel_core;

> > > +                       ret = get_core_temp(priv, core_index);

> > > +                       if (ret)

> > > +                               return ret;

> > > +

> > > +                       *val = priv->temp.core[core_index].value;

> > > +                       break;

> > > +               }

> > > +               break;

> > > +       case hwmon_temp_max:

> > > +               *val = priv->temp.tcontrol.value;

> > > +               break;

> > > +       case hwmon_temp_crit:

> > > +               *val = priv->temp.tjmax.value;

> > > +               break;

> > > +       case hwmon_temp_crit_hyst:

> > > +               *val = priv->temp.tjmax.value - priv->temp.tcontrol.value;

> > > +               break;

> > > +       default:

> > > +               return -EOPNOTSUPP;

> > > +       }

> > > +

> > > +       return 0;

> > > +}

> > > +

> > > +static umode_t cputemp_is_visible(const void *data, enum hwmon_sensor_types

> > > type,

> > > +                                 u32 attr, int channel)

> > > +{

> > > +       const struct peci_cputemp *priv = data;

> > > +

> > > +       if (channel > CPUTEMP_CHANNEL_NUMS)

> > > +               return 0;

> > > +

> > > +       if (channel < channel_core)

> > > +               return 0444;

> > > +

> > > +       if (test_bit(channel - channel_core, priv->core_mask))

> > > +               return 0444;

> > > +

> > > +       return 0;

> > > +}

> > > +

> > > +static int init_core_mask(struct peci_cputemp *priv)

> > > +{

> > > +       struct peci_device *peci_dev = priv->peci_dev;

> > > +       struct resolved_cores_reg *reg = priv->gen_info->reg;

> > > +       u64 core_mask;

> > > +       u32 data;

> > > +       int ret;

> > > +

> > > +       /* Get the RESOLVED_CORES register value */

> > > +       switch (peci_dev->info.model) {

> > > +       case INTEL_FAM6_ICELAKE_X:

> > > +       case INTEL_FAM6_ICELAKE_D:

> > > +               ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,

> > > +                                            reg->func, reg->offset + 4,

> > > &data);

> > > +               if (ret)

> > > +                       return ret;

> > > +

> > > +               core_mask = (u64)data << 32;

> > > +

> > > +               ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,

> > > +                                            reg->func, reg->offset, &data);

> > > +               if (ret)

> > > +                       return ret;

> > > +

> > > +               core_mask |= data;

> > > +

> > > +               break;

> > > +       default:

> > > +               ret = peci_pci_local_read(peci_dev, reg->bus, reg->dev,

> > > +                                         reg->func, reg->offset, &data);

> > > +               if (ret)

> > > +                       return ret;

> > > +

> > > +               core_mask = data;

> > > +

> > > +               break;

> > > +       }

> > > +

> > > +       if (!core_mask)

> > > +               return -EIO;

> > > +

> > > +       bitmap_from_u64(priv->core_mask, core_mask);

> > > +

> > > +       return 0;

> > > +}

> > > +

> > > +static int create_temp_label(struct peci_cputemp *priv)

> > > +{

> > > +       unsigned long core_max = find_last_bit(priv->core_mask,

> > > CORE_NUMS_MAX);

> > > +       int i;

> > > +

> > > +       priv->coretemp_label = devm_kzalloc(priv->dev, core_max * sizeof(char

> > > *), GFP_KERNEL);

> > > +       if (!priv->coretemp_label)

> > > +               return -ENOMEM;

> > > +

> > > +       for_each_set_bit(i, priv->core_mask, CORE_NUMS_MAX) {

> > > +               priv->coretemp_label[i] = devm_kasprintf(priv->dev,

> > > GFP_KERNEL, "Core %d", i);

> > > +               if (!priv->coretemp_label[i])

> > > +                       return -ENOMEM;

> > > +       }

> > > +

> > > +       return 0;

> > > +}

> > > +

> > > +static void check_resolved_cores(struct peci_cputemp *priv)

> > > +{

> > > +       int ret;

> > > +

> > > +       ret = init_core_mask(priv);

> > > +       if (ret)

> > > +               return;

> > > +

> > > +       ret = create_temp_label(priv);

> > > +       if (ret)

> > > +               bitmap_zero(priv->core_mask, CORE_NUMS_MAX);

> > 

> > This needs a comment explaining why it is ok to ignore the above errors.

> > 

> > I understand it is because the non-core data will still be available.

> > Yet, it still needs to be explained so others don't need to examine

> > the code to figure out the reason.

> > 

> 

> Right - I'll add a:

> /*

>  * Failure to resolve cores is non-critical, we're still able to

>  * provide other sensor data.

>  */

> 

> > > +}

> > > +

> > > +static const struct hwmon_ops peci_cputemp_ops = {

> > > +       .is_visible = cputemp_is_visible,

> > > +       .read_string = cputemp_read_string,

> > > +       .read = cputemp_read,

> > > +};

> > > +

> > > +static const u32 peci_cputemp_temp_channel_config[] = {

> > > +       /* Die temperature */

> > > +       HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |

> > > HWMON_T_CRIT_HYST,

> > > +       /* DTS margin */

> > > +       HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |

> > > HWMON_T_CRIT_HYST,

> > > +       /* Tcontrol temperature */

> > > +       HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,

> > > +       /* Tthrottle temperature */

> > > +       HWMON_T_LABEL | HWMON_T_INPUT,

> > > +       /* Tjmax temperature */

> > > +       HWMON_T_LABEL | HWMON_T_INPUT,

> > > +       /* Core temperature - for all core channels */

> > > +       [channel_core ... CPUTEMP_CHANNEL_NUMS - 1] = HWMON_T_LABEL |

> > > HWMON_T_INPUT,

> > > +       0

> > > +};

> > > +

> > > +static const struct hwmon_channel_info peci_cputemp_temp_channel = {

> > > +       .type = hwmon_temp,

> > > +       .config = peci_cputemp_temp_channel_config,

> > > +};

> > > +

> > > +static const struct hwmon_channel_info *peci_cputemp_info[] = {

> > > +       &peci_cputemp_temp_channel,

> > > +       NULL

> > > +};

> > > +

> > > +static const struct hwmon_chip_info peci_cputemp_chip_info = {

> > > +       .ops = &peci_cputemp_ops,

> > > +       .info = peci_cputemp_info,

> > > +};

> > > +

> > > +static int peci_cputemp_probe(struct auxiliary_device *adev,

> > > +                             const struct auxiliary_device_id *id)

> > > +{

> > > +       struct device *dev = &adev->dev;

> > > +       struct peci_device *peci_dev = to_peci_device(dev->parent);

> > > +       struct peci_cputemp *priv;

> > > +       struct device *hwmon_dev;

> > > +

> > > +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);

> > > +       if (!priv)

> > > +               return -ENOMEM;

> > > +

> > > +       priv->name = devm_kasprintf(dev, GFP_KERNEL, "peci_cputemp.cpu%d",

> > > +                                   peci_dev->info.socket_id);

> > > +       if (!priv->name)

> > > +               return -ENOMEM;

> > > +

> > > +       dev_set_drvdata(dev, priv);

> > 

> > What is this used for ?

> 

> Our sensors are per-device. We need this to access the corresponding priv in

> cputemp_read_string() and cputemp_read().

> 


The parameter to both cputemp_read_string() and cputemp_read() is the
pointer to the hwmon device, not the pointer to the auxiliary device.
It has its driver data set to 'priv' from the parameter passed to
devm_hwmon_device_register_with_info().

> > 

> > > +       priv->dev = dev;

> > > +       priv->peci_dev = peci_dev;

> > > +       priv->gen_info = (const struct cpu_info *)id->driver_data;

> > > +

> > > +       check_resolved_cores(priv);

> > > +

> > > +       hwmon_dev = devm_hwmon_device_register_with_info(priv->dev, priv-

> > > >name,

> > > +                                                        priv,

> > > &peci_cputemp_chip_info, NULL);

> > > +

> > > +       return PTR_ERR_OR_ZERO(hwmon_dev);

> > > +}

> > > +

> > > +static struct resolved_cores_reg resolved_cores_reg_hsx = {

> > > +       .bus = 1,

> > > +       .dev = 30,

> > > +       .func = 3,

> > > +       .offset = 0xb4,

> > > +};

> > > +

> > > +static struct resolved_cores_reg resolved_cores_reg_icx = {

> > > +       .bus = 14,

> > > +       .dev = 30,

> > > +       .func = 3,

> > > +       .offset = 0xd0,

> > > +};

> > 

> > Please explain those magic numbers.

> > 

> 

> Those magic numbers refer to BDF (bus, device, function) and offset of the PCI

> config register (RESOLVED_CORES_CFG) that can be accessed via PECI to read

> resolved cores configuration.

> Unfortunately, the values are just platform-specific magic numbers.

> Do you think this should be explained with an additional comment?

> 


Yes, please.

Guenter

> Thank you

> -Iwona

> 

> > > +

> > > +static const struct cpu_info cpu_hsx = {

> > > +       .reg            = &resolved_cores_reg_hsx,

> > > +       .min_peci_revision = 0x30,

> > > +};

> > > +

> > > +static const struct cpu_info cpu_icx = {

> > > +       .reg            = &resolved_cores_reg_icx,

> > > +       .min_peci_revision = 0x40,

> > > +};

> > > +

> > > +static const struct auxiliary_device_id peci_cputemp_ids[] = {

> > > +       {

> > > +               .name = "peci_cpu.cputemp.hsx",

> > > +               .driver_data = (kernel_ulong_t)&cpu_hsx,

> > > +       },

> > > +       {

> > > +               .name = "peci_cpu.cputemp.bdx",

> > > +               .driver_data = (kernel_ulong_t)&cpu_hsx,

> > > +       },

> > > +       {

> > > +               .name = "peci_cpu.cputemp.bdxd",

> > > +               .driver_data = (kernel_ulong_t)&cpu_hsx,

> > > +       },

> > > +       {

> > > +               .name = "peci_cpu.cputemp.skx",

> > > +               .driver_data = (kernel_ulong_t)&cpu_hsx,

> > > +       },

> > > +       {

> > > +               .name = "peci_cpu.cputemp.icx",

> > > +               .driver_data = (kernel_ulong_t)&cpu_icx,

> > > +       },

> > > +       {

> > > +               .name = "peci_cpu.cputemp.icxd",

> > > +               .driver_data = (kernel_ulong_t)&cpu_icx,

> > > +       },

> > > +       { }

> > > +};

> > > +MODULE_DEVICE_TABLE(auxiliary, peci_cputemp_ids);

> > > +

> > > +static struct auxiliary_driver peci_cputemp_driver = {

> > > +       .probe          = peci_cputemp_probe,

> > > +       .id_table       = peci_cputemp_ids,

> > > +};

> > > +

> > > +module_auxiliary_driver(peci_cputemp_driver);

> > > +

> > > +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");

> > > +MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska@intel.com>");

> > > +MODULE_DESCRIPTION("PECI cputemp driver");

> > > +MODULE_LICENSE("GPL");

> > > +MODULE_IMPORT_NS(PECI_CPU);

>
Zev Weiss July 27, 2021, 7:06 a.m. UTC | #4
On Mon, Jul 12, 2021 at 05:04:44PM CDT, Iwona Winiarska wrote:
>Add peci-cputemp driver for Digital Thermal Sensor (DTS) thermal

>readings of the processor package and processor cores that are

>accessible via the PECI interface.

>

>The main use case for the driver (and PECI interface) is out-of-band

>management, where we're able to obtain the DTS readings from an external

>entity connected with PECI, e.g. BMC on server platforms.

>

>Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

>Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

>Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>

>Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

>---

> MAINTAINERS                  |   7 +

> drivers/hwmon/Kconfig        |   2 +

> drivers/hwmon/Makefile       |   1 +

> drivers/hwmon/peci/Kconfig   |  18 ++

> drivers/hwmon/peci/Makefile  |   5 +

> drivers/hwmon/peci/common.h  |  46 ++++

> drivers/hwmon/peci/cputemp.c | 503 +++++++++++++++++++++++++++++++++++

> 7 files changed, 582 insertions(+)

> create mode 100644 drivers/hwmon/peci/Kconfig

> create mode 100644 drivers/hwmon/peci/Makefile

> create mode 100644 drivers/hwmon/peci/common.h

> create mode 100644 drivers/hwmon/peci/cputemp.c

>

>diff --git a/MAINTAINERS b/MAINTAINERS

>index f47b5f634293..35ba9e3646bd 100644

>--- a/MAINTAINERS

>+++ b/MAINTAINERS

>@@ -14504,6 +14504,13 @@ L:	platform-driver-x86@vger.kernel.org

> S:	Maintained

> F:	drivers/platform/x86/peaq-wmi.c

>

>+PECI HARDWARE MONITORING DRIVERS

>+M:	Iwona Winiarska <iwona.winiarska@intel.com>

>+R:	Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

>+L:	linux-hwmon@vger.kernel.org

>+S:	Supported

>+F:	drivers/hwmon/peci/

>+

> PECI SUBSYSTEM

> M:	Iwona Winiarska <iwona.winiarska@intel.com>

> R:	Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

>diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig

>index e3675377bc5d..61c0e3404415 100644

>--- a/drivers/hwmon/Kconfig

>+++ b/drivers/hwmon/Kconfig

>@@ -1507,6 +1507,8 @@ config SENSORS_PCF8591

> 	  These devices are hard to detect and rarely found on mainstream

> 	  hardware. If unsure, say N.

>

>+source "drivers/hwmon/peci/Kconfig"

>+

> source "drivers/hwmon/pmbus/Kconfig"

>

> config SENSORS_PWM_FAN

>diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile

>index d712c61c1f5e..f52331f212ed 100644

>--- a/drivers/hwmon/Makefile

>+++ b/drivers/hwmon/Makefile

>@@ -202,6 +202,7 @@ obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o

> obj-$(CONFIG_SENSORS_XGENE)	+= xgene-hwmon.o

>

> obj-$(CONFIG_SENSORS_OCC)	+= occ/

>+obj-$(CONFIG_SENSORS_PECI)	+= peci/

> obj-$(CONFIG_PMBUS)		+= pmbus/

>

> ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG

>diff --git a/drivers/hwmon/peci/Kconfig b/drivers/hwmon/peci/Kconfig

>new file mode 100644

>index 000000000000..e10eed68d70a

>--- /dev/null

>+++ b/drivers/hwmon/peci/Kconfig

>@@ -0,0 +1,18 @@

>+# SPDX-License-Identifier: GPL-2.0-only

>+

>+config SENSORS_PECI_CPUTEMP

>+	tristate "PECI CPU temperature monitoring client"

>+	depends on PECI

>+	select SENSORS_PECI

>+	select PECI_CPU

>+	help

>+	  If you say yes here you get support for the generic Intel PECI

>+	  cputemp driver which provides Digital Thermal Sensor (DTS) thermal

>+	  readings of the CPU package and CPU cores that are accessible via

>+	  the processor PECI interface.

>+

>+	  This driver can also be built as a module. If so, the module

>+	  will be called peci-cputemp.

>+

>+config SENSORS_PECI

>+	tristate

>diff --git a/drivers/hwmon/peci/Makefile b/drivers/hwmon/peci/Makefile

>new file mode 100644

>index 000000000000..e8a0ada5ab1f

>--- /dev/null

>+++ b/drivers/hwmon/peci/Makefile

>@@ -0,0 +1,5 @@

>+# SPDX-License-Identifier: GPL-2.0-only

>+

>+peci-cputemp-y := cputemp.o

>+

>+obj-$(CONFIG_SENSORS_PECI_CPUTEMP)	+= peci-cputemp.o

>diff --git a/drivers/hwmon/peci/common.h b/drivers/hwmon/peci/common.h

>new file mode 100644

>index 000000000000..54580c100d06

>--- /dev/null

>+++ b/drivers/hwmon/peci/common.h

>@@ -0,0 +1,46 @@

>+/* SPDX-License-Identifier: GPL-2.0-only */

>+/* Copyright (c) 2021 Intel Corporation */

>+

>+#include <linux/types.h>

>+

>+#ifndef __PECI_HWMON_COMMON_H

>+#define __PECI_HWMON_COMMON_H

>+

>+#define UPDATE_INTERVAL_DEFAULT		HZ

>+

>+/**

>+ * struct peci_sensor_data - PECI sensor information

>+ * @valid: flag to indicate the sensor value is valid

>+ * @value: sensor value in milli units

>+ * @last_updated: time of the last update in jiffies

>+ */

>+struct peci_sensor_data {

>+	unsigned int valid;


From what I can see it looks like the 'valid' member here is strictly a
one-shot has-this-value-ever-been-set indicator, which seems a bit
wasteful to keep around forever post initialization; couldn't the same
information be inferred from checking last_updated != 0 or something?

>+	s32 value;

>+	unsigned long last_updated;

>+};

>+

>+/**

>+ * peci_sensor_need_update() - check whether sensor update is needed or not

>+ * @sensor: pointer to sensor data struct

>+ *

>+ * Return: true if update is needed, false if not.

>+ */

>+

>+static inline bool peci_sensor_need_update(struct peci_sensor_data *sensor)

>+{

>+	return !sensor->valid ||

>+	       time_after(jiffies, sensor->last_updated + UPDATE_INTERVAL_DEFAULT);

>+}

>+

>+/**

>+ * peci_sensor_mark_updated() - mark the sensor is updated

>+ * @sensor: pointer to sensor data struct

>+ */

>+static inline void peci_sensor_mark_updated(struct peci_sensor_data *sensor)

>+{

>+	sensor->valid = 1;

>+	sensor->last_updated = jiffies;

>+}

>+

>+#endif /* __PECI_HWMON_COMMON_H */

>diff --git a/drivers/hwmon/peci/cputemp.c b/drivers/hwmon/peci/cputemp.c

>new file mode 100644

>index 000000000000..56a526471687

>--- /dev/null

>+++ b/drivers/hwmon/peci/cputemp.c

>@@ -0,0 +1,503 @@

>+// SPDX-License-Identifier: GPL-2.0-only

>+// Copyright (c) 2018-2021 Intel Corporation

>+

>+#include <linux/auxiliary_bus.h>

>+#include <linux/bitfield.h>

>+#include <linux/bitops.h>

>+#include <linux/hwmon.h>

>+#include <linux/jiffies.h>

>+#include <linux/module.h>

>+#include <linux/peci.h>

>+#include <linux/peci-cpu.h>

>+#include <linux/units.h>

>+#include <linux/x86/intel-family.h>

>+

>+#include "common.h"

>+

>+#define CORE_NUMS_MAX		64

>+

>+#define DEFAULT_CHANNEL_NUMS	5


DEFAULT_ seems like a slightly odd prefix for this (it's not something
that can really be overridden or anything); would BASE_ perhaps be a bit
more appropriate?

>+#define CORETEMP_CHANNEL_NUMS	CORE_NUMS_MAX

>+#define CPUTEMP_CHANNEL_NUMS	(DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)

>+

>+#define TEMP_TARGET_FAN_TEMP_MASK	GENMASK(15, 8)

>+#define TEMP_TARGET_REF_TEMP_MASK	GENMASK(23, 16)

>+#define TEMP_TARGET_TJ_OFFSET_MASK	GENMASK(29, 24)

>+

>+#define DTS_MARGIN_MASK		GENMASK(15, 0)

>+#define PCS_MODULE_TEMP_MASK	GENMASK(15, 0)

>+

>+#define DTS_FIXED_POINT_FRACTION	64

>+

>+struct resolved_cores_reg {

>+	u8 bus;

>+	u8 dev;

>+	u8 func;

>+	u8 offset;

>+};

>+

>+struct cpu_info {

>+	struct resolved_cores_reg *reg;

>+	u8 min_peci_revision;


As with the dimmtemp driver, min_peci_revision appears unused here,
though in this case if it were removed there'd only be one (pointer)
member left in struct cpu_info, so we could perhaps remove it as well
and then also a level of indirection in peci_cputemp_ids/cpu_{hsx,icx}
too?

>+};

>+

>+struct peci_cputemp {

>+	struct peci_device *peci_dev;

>+	struct device *dev;

>+	const char *name;

>+	const struct cpu_info *gen_info;

>+	struct {

>+		struct peci_sensor_data die;

>+		struct peci_sensor_data dts;

>+		struct peci_sensor_data tcontrol;

>+		struct peci_sensor_data tthrottle;

>+		struct peci_sensor_data tjmax;

>+		struct peci_sensor_data core[CORETEMP_CHANNEL_NUMS];

>+	} temp;

>+	const char **coretemp_label;

>+	DECLARE_BITMAP(core_mask, CORE_NUMS_MAX);

>+};

>+

>+enum cputemp_channels {

>+	channel_die,

>+	channel_dts,

>+	channel_tcontrol,

>+	channel_tthrottle,

>+	channel_tjmax,

>+	channel_core,

>+};

>+

>+static const char *cputemp_label[DEFAULT_CHANNEL_NUMS] = {


static const char * const cputemp_label?  (That is, const pointer to
const char, rather than non-const pointer to const char.)

>+	"Die",

>+	"DTS",

>+	"Tcontrol",

>+	"Tthrottle",

>+	"Tjmax",

>+};

>+

>+static int get_temp_targets(struct peci_cputemp *priv)

>+{

>+	s32 tthrottle_offset, tcontrol_margin;

>+	u32 pcs;

>+	int ret;

>+

>+	/*

>+	 * Just use only the tcontrol marker to determine if target values need

>+	 * update.

>+	 */

>+	if (!peci_sensor_need_update(&priv->temp.tcontrol))

>+		return 0;

>+

>+	ret = peci_pcs_read(priv->peci_dev, PECI_PCS_TEMP_TARGET, 0, &pcs);

>+	if (ret)

>+		return ret;

>+

>+	priv->temp.tjmax.value = FIELD_GET(TEMP_TARGET_REF_TEMP_MASK, pcs) * MILLIDEGREE_PER_DEGREE;

>+

>+	tcontrol_margin = FIELD_GET(TEMP_TARGET_FAN_TEMP_MASK, pcs);

>+	tcontrol_margin = sign_extend32(tcontrol_margin, 7) * MILLIDEGREE_PER_DEGREE;

>+	priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;

>+

>+	tthrottle_offset = FIELD_GET(TEMP_TARGET_TJ_OFFSET_MASK, pcs) * MILLIDEGREE_PER_DEGREE;

>+	priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;

>+

>+	peci_sensor_mark_updated(&priv->temp.tcontrol);

>+

>+	return 0;

>+}

>+

>+/*

>+ * Processors return a value of DTS reading in S10.6 fixed point format

>+ * (sign, 10 bits signed integer value, 6 bits fractional).


This parenthetical reads to me like it's describing 17 bits -- I'm not a
PECI expert, but from my reading of the (somewhat skimpy) docs I've got
on it I'd suggest a description more like "sign, 9-bit magnitude, 6-bit
fraction".

>+ * Error codes:

>+ *   0x8000: General sensor error

>+ *   0x8001: Reserved

>+ *   0x8002: Underflow on reading value

>+ *   0x8003-0x81ff: Reserved

>+ */

>+static bool dts_valid(s32 val)

>+{

>+	return val < 0x8000 || val > 0x81ff;

>+}

>+

>+static s32 dts_to_millidegree(s32 val)

>+{

>+	return sign_extend32(val, 15) * MILLIDEGREE_PER_DEGREE / DTS_FIXED_POINT_FRACTION;

>+}

>+

>+static int get_die_temp(struct peci_cputemp *priv)

>+{

>+	s16 temp;

>+	int ret;

>+

>+	if (!peci_sensor_need_update(&priv->temp.die))

>+		return 0;

>+

>+	ret = peci_temp_read(priv->peci_dev, &temp);

>+	if (ret)

>+		return ret;

>+

>+	if (!dts_valid(temp))

>+		return -EIO;

>+

>+	/* Note that the tjmax should be available before calling it */

>+	priv->temp.die.value = priv->temp.tjmax.value + dts_to_millidegree(temp);

>+

>+	peci_sensor_mark_updated(&priv->temp.die);

>+

>+	return 0;

>+}

>+

>+static int get_dts(struct peci_cputemp *priv)

>+{

>+	s32 dts_margin;

>+	u32 pcs;

>+	int ret;

>+

>+	if (!peci_sensor_need_update(&priv->temp.dts))

>+		return 0;

>+

>+	ret = peci_pcs_read(priv->peci_dev, PECI_PCS_THERMAL_MARGIN, 0, &pcs);

>+	if (ret)

>+		return ret;

>+

>+	dts_margin = FIELD_GET(DTS_MARGIN_MASK, pcs);

>+	if (!dts_valid(dts_margin))

>+		return -EIO;

>+

>+	/* Note that the tcontrol should be available before calling it */

>+	priv->temp.dts.value = priv->temp.tcontrol.value - dts_to_millidegree(dts_margin);

>+

>+	peci_sensor_mark_updated(&priv->temp.dts);

>+

>+	return 0;

>+}

>+

>+static int get_core_temp(struct peci_cputemp *priv, int core_index)

>+{

>+	s32 core_dts_margin;

>+	u32 pcs;

>+	int ret;

>+

>+	if (!peci_sensor_need_update(&priv->temp.core[core_index]))

>+		return 0;

>+

>+	ret = peci_pcs_read(priv->peci_dev, PECI_PCS_MODULE_TEMP, core_index, &pcs);

>+	if (ret)

>+		return ret;

>+

>+	core_dts_margin = FIELD_GET(PCS_MODULE_TEMP_MASK, pcs);

>+	if (!dts_valid(core_dts_margin))

>+		return -EIO;

>+

>+	/* Note that the tjmax should be available before calling it */

>+	priv->temp.core[core_index].value =

>+		priv->temp.tjmax.value + dts_to_millidegree(core_dts_margin);

>+

>+	peci_sensor_mark_updated(&priv->temp.core[core_index]);

>+

>+	return 0;

>+}

>+

>+static int cputemp_read_string(struct device *dev, enum hwmon_sensor_types type,

>+			       u32 attr, int channel, const char **str)

>+{

>+	struct peci_cputemp *priv = dev_get_drvdata(dev);

>+

>+	if (attr != hwmon_temp_label)

>+		return -EOPNOTSUPP;

>+

>+	*str = channel < channel_core ?

>+		cputemp_label[channel] : priv->coretemp_label[channel - channel_core];

>+

>+	return 0;

>+}

>+

>+static int cputemp_read(struct device *dev, enum hwmon_sensor_types type,

>+			u32 attr, int channel, long *val)

>+{

>+	struct peci_cputemp *priv = dev_get_drvdata(dev);

>+	int ret, core_index;

>+

>+	ret = get_temp_targets(priv);

>+	if (ret)

>+		return ret;

>+

>+	switch (attr) {

>+	case hwmon_temp_input:

>+		switch (channel) {

>+		case channel_die:

>+			ret = get_die_temp(priv);

>+			if (ret)

>+				return ret;

>+

>+			*val = priv->temp.die.value;

>+			break;

>+		case channel_dts:

>+			ret = get_dts(priv);

>+			if (ret)

>+				return ret;

>+

>+			*val = priv->temp.dts.value;

>+			break;

>+		case channel_tcontrol:

>+			*val = priv->temp.tcontrol.value;

>+			break;

>+		case channel_tthrottle:

>+			*val = priv->temp.tthrottle.value;

>+			break;

>+		case channel_tjmax:

>+			*val = priv->temp.tjmax.value;

>+			break;

>+		default:

>+			core_index = channel - channel_core;

>+			ret = get_core_temp(priv, core_index);

>+			if (ret)

>+				return ret;

>+

>+			*val = priv->temp.core[core_index].value;

>+			break;

>+		}

>+		break;

>+	case hwmon_temp_max:

>+		*val = priv->temp.tcontrol.value;

>+		break;

>+	case hwmon_temp_crit:

>+		*val = priv->temp.tjmax.value;

>+		break;

>+	case hwmon_temp_crit_hyst:

>+		*val = priv->temp.tjmax.value - priv->temp.tcontrol.value;

>+		break;

>+	default:

>+		return -EOPNOTSUPP;

>+	}

>+

>+	return 0;

>+}

>+

>+static umode_t cputemp_is_visible(const void *data, enum hwmon_sensor_types type,

>+				  u32 attr, int channel)

>+{

>+	const struct peci_cputemp *priv = data;

>+

>+	if (channel > CPUTEMP_CHANNEL_NUMS)

>+		return 0;

>+

>+	if (channel < channel_core)

>+		return 0444;

>+

>+	if (test_bit(channel - channel_core, priv->core_mask))

>+		return 0444;

>+

>+	return 0;

>+}

>+

>+static int init_core_mask(struct peci_cputemp *priv)

>+{

>+	struct peci_device *peci_dev = priv->peci_dev;

>+	struct resolved_cores_reg *reg = priv->gen_info->reg;

>+	u64 core_mask;

>+	u32 data;

>+	int ret;

>+

>+	/* Get the RESOLVED_CORES register value */

>+	switch (peci_dev->info.model) {

>+	case INTEL_FAM6_ICELAKE_X:

>+	case INTEL_FAM6_ICELAKE_D:

>+		ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,

>+					     reg->func, reg->offset + 4, &data);

>+		if (ret)

>+			return ret;

>+

>+		core_mask = (u64)data << 32;

>+

>+		ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,

>+					     reg->func, reg->offset, &data);

>+		if (ret)

>+			return ret;

>+

>+		core_mask |= data;

>+

>+		break;

>+	default:

>+		ret = peci_pci_local_read(peci_dev, reg->bus, reg->dev,

>+					  reg->func, reg->offset, &data);

>+		if (ret)

>+			return ret;

>+

>+		core_mask = data;

>+

>+		break;

>+	}

>+

>+	if (!core_mask)

>+		return -EIO;

>+

>+	bitmap_from_u64(priv->core_mask, core_mask);

>+

>+	return 0;

>+}

>+

>+static int create_temp_label(struct peci_cputemp *priv)

>+{

>+	unsigned long core_max = find_last_bit(priv->core_mask, CORE_NUMS_MAX);

>+	int i;

>+

>+	priv->coretemp_label = devm_kzalloc(priv->dev, core_max * sizeof(char *), GFP_KERNEL);

>+	if (!priv->coretemp_label)

>+		return -ENOMEM;

>+

>+	for_each_set_bit(i, priv->core_mask, CORE_NUMS_MAX) {

>+		priv->coretemp_label[i] = devm_kasprintf(priv->dev, GFP_KERNEL, "Core %d", i);

>+		if (!priv->coretemp_label[i])

>+			return -ENOMEM;

>+	}

>+

>+	return 0;

>+}

>+

>+static void check_resolved_cores(struct peci_cputemp *priv)

>+{

>+	int ret;

>+

>+	ret = init_core_mask(priv);

>+	if (ret)

>+		return;

>+

>+	ret = create_temp_label(priv);

>+	if (ret)

>+		bitmap_zero(priv->core_mask, CORE_NUMS_MAX);

>+}

>+

>+static const struct hwmon_ops peci_cputemp_ops = {

>+	.is_visible = cputemp_is_visible,

>+	.read_string = cputemp_read_string,

>+	.read = cputemp_read,

>+};

>+

>+static const u32 peci_cputemp_temp_channel_config[] = {

>+	/* Die temperature */

>+	HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | HWMON_T_CRIT_HYST,

>+	/* DTS margin */

>+	HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | HWMON_T_CRIT_HYST,

>+	/* Tcontrol temperature */

>+	HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,

>+	/* Tthrottle temperature */

>+	HWMON_T_LABEL | HWMON_T_INPUT,

>+	/* Tjmax temperature */

>+	HWMON_T_LABEL | HWMON_T_INPUT,

>+	/* Core temperature - for all core channels */

>+	[channel_core ... CPUTEMP_CHANNEL_NUMS - 1] = HWMON_T_LABEL | HWMON_T_INPUT,

>+	0

>+};

>+

>+static const struct hwmon_channel_info peci_cputemp_temp_channel = {

>+	.type = hwmon_temp,

>+	.config = peci_cputemp_temp_channel_config,

>+};

>+

>+static const struct hwmon_channel_info *peci_cputemp_info[] = {

>+	&peci_cputemp_temp_channel,

>+	NULL

>+};

>+

>+static const struct hwmon_chip_info peci_cputemp_chip_info = {

>+	.ops = &peci_cputemp_ops,

>+	.info = peci_cputemp_info,

>+};

>+

>+static int peci_cputemp_probe(struct auxiliary_device *adev,

>+			      const struct auxiliary_device_id *id)

>+{

>+	struct device *dev = &adev->dev;

>+	struct peci_device *peci_dev = to_peci_device(dev->parent);

>+	struct peci_cputemp *priv;

>+	struct device *hwmon_dev;

>+

>+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);

>+	if (!priv)

>+		return -ENOMEM;

>+

>+	priv->name = devm_kasprintf(dev, GFP_KERNEL, "peci_cputemp.cpu%d",

>+				    peci_dev->info.socket_id);

>+	if (!priv->name)

>+		return -ENOMEM;

>+

>+	dev_set_drvdata(dev, priv);

>+	priv->dev = dev;

>+	priv->peci_dev = peci_dev;

>+	priv->gen_info = (const struct cpu_info *)id->driver_data;

>+

>+	check_resolved_cores(priv);

>+

>+	hwmon_dev = devm_hwmon_device_register_with_info(priv->dev, priv->name,

>+							 priv, &peci_cputemp_chip_info, NULL);

>+

>+	return PTR_ERR_OR_ZERO(hwmon_dev);

>+}

>+

>+static struct resolved_cores_reg resolved_cores_reg_hsx = {

>+	.bus = 1,

>+	.dev = 30,

>+	.func = 3,

>+	.offset = 0xb4,

>+};

>+

>+static struct resolved_cores_reg resolved_cores_reg_icx = {

>+	.bus = 14,

>+	.dev = 30,

>+	.func = 3,

>+	.offset = 0xd0,

>+};

>+

>+static const struct cpu_info cpu_hsx = {

>+	.reg		= &resolved_cores_reg_hsx,

>+	.min_peci_revision = 0x30,

>+};

>+

>+static const struct cpu_info cpu_icx = {

>+	.reg		= &resolved_cores_reg_icx,

>+	.min_peci_revision = 0x40,

>+};

>+

>+static const struct auxiliary_device_id peci_cputemp_ids[] = {

>+	{

>+		.name = "peci_cpu.cputemp.hsx",

>+		.driver_data = (kernel_ulong_t)&cpu_hsx,

>+	},

>+	{

>+		.name = "peci_cpu.cputemp.bdx",

>+		.driver_data = (kernel_ulong_t)&cpu_hsx,

>+	},

>+	{

>+		.name = "peci_cpu.cputemp.bdxd",

>+		.driver_data = (kernel_ulong_t)&cpu_hsx,

>+	},

>+	{

>+		.name = "peci_cpu.cputemp.skx",

>+		.driver_data = (kernel_ulong_t)&cpu_hsx,

>+	},

>+	{

>+		.name = "peci_cpu.cputemp.icx",

>+		.driver_data = (kernel_ulong_t)&cpu_icx,

>+	},

>+	{

>+		.name = "peci_cpu.cputemp.icxd",

>+		.driver_data = (kernel_ulong_t)&cpu_icx,

>+	},

>+	{ }

>+};

>+MODULE_DEVICE_TABLE(auxiliary, peci_cputemp_ids);

>+

>+static struct auxiliary_driver peci_cputemp_driver = {

>+	.probe		= peci_cputemp_probe,

>+	.id_table	= peci_cputemp_ids,

>+};

>+

>+module_auxiliary_driver(peci_cputemp_driver);

>+

>+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");

>+MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska@intel.com>");

>+MODULE_DESCRIPTION("PECI cputemp driver");

>+MODULE_LICENSE("GPL");

>+MODULE_IMPORT_NS(PECI_CPU);

>-- 

>2.31.1

>
Iwona Winiarska July 30, 2021, 9:51 p.m. UTC | #5
On Tue, 2021-07-27 at 07:06 +0000, Zev Weiss wrote:
> On Mon, Jul 12, 2021 at 05:04:44PM CDT, Iwona Winiarska wrote:

> > Add peci-cputemp driver for Digital Thermal Sensor (DTS) thermal

> > readings of the processor package and processor cores that are

> > accessible via the PECI interface.

> > 

> > The main use case for the driver (and PECI interface) is out-of-band

> > management, where we're able to obtain the DTS readings from an external

> > entity connected with PECI, e.g. BMC on server platforms.

> > 

> > Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

> > Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

> > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>

> > Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

> > ---

> > MAINTAINERS                  |   7 +

> > drivers/hwmon/Kconfig        |   2 +

> > drivers/hwmon/Makefile       |   1 +

> > drivers/hwmon/peci/Kconfig   |  18 ++

> > drivers/hwmon/peci/Makefile  |   5 +

> > drivers/hwmon/peci/common.h  |  46 ++++

> > drivers/hwmon/peci/cputemp.c | 503 +++++++++++++++++++++++++++++++++++

> > 7 files changed, 582 insertions(+)

> > create mode 100644 drivers/hwmon/peci/Kconfig

> > create mode 100644 drivers/hwmon/peci/Makefile

> > create mode 100644 drivers/hwmon/peci/common.h

> > create mode 100644 drivers/hwmon/peci/cputemp.c

> > 

> > diff --git a/MAINTAINERS b/MAINTAINERS

> > index f47b5f634293..35ba9e3646bd 100644

> > --- a/MAINTAINERS

> > +++ b/MAINTAINERS

> > @@ -14504,6 +14504,13 @@ L:     platform-driver-x86@vger.kernel.org

> > S:      Maintained

> > F:      drivers/platform/x86/peaq-wmi.c

> > 

> > +PECI HARDWARE MONITORING DRIVERS

> > +M:     Iwona Winiarska <iwona.winiarska@intel.com>

> > +R:     Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

> > +L:     linux-hwmon@vger.kernel.org

> > +S:     Supported

> > +F:     drivers/hwmon/peci/

> > +

> > PECI SUBSYSTEM

> > M:      Iwona Winiarska <iwona.winiarska@intel.com>

> > R:      Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig

> > index e3675377bc5d..61c0e3404415 100644

> > --- a/drivers/hwmon/Kconfig

> > +++ b/drivers/hwmon/Kconfig

> > @@ -1507,6 +1507,8 @@ config SENSORS_PCF8591

> >           These devices are hard to detect and rarely found on mainstream

> >           hardware. If unsure, say N.

> > 

> > +source "drivers/hwmon/peci/Kconfig"

> > +

> > source "drivers/hwmon/pmbus/Kconfig"

> > 

> > config SENSORS_PWM_FAN

> > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile

> > index d712c61c1f5e..f52331f212ed 100644

> > --- a/drivers/hwmon/Makefile

> > +++ b/drivers/hwmon/Makefile

> > @@ -202,6 +202,7 @@ obj-$(CONFIG_SENSORS_WM8350)        += wm8350-hwmon.o

> > obj-$(CONFIG_SENSORS_XGENE)     += xgene-hwmon.o

> > 

> > obj-$(CONFIG_SENSORS_OCC)       += occ/

> > +obj-$(CONFIG_SENSORS_PECI)     += peci/

> > obj-$(CONFIG_PMBUS)             += pmbus/

> > 

> > ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG

> > diff --git a/drivers/hwmon/peci/Kconfig b/drivers/hwmon/peci/Kconfig

> > new file mode 100644

> > index 000000000000..e10eed68d70a

> > --- /dev/null

> > +++ b/drivers/hwmon/peci/Kconfig

> > @@ -0,0 +1,18 @@

> > +# SPDX-License-Identifier: GPL-2.0-only

> > +

> > +config SENSORS_PECI_CPUTEMP

> > +       tristate "PECI CPU temperature monitoring client"

> > +       depends on PECI

> > +       select SENSORS_PECI

> > +       select PECI_CPU

> > +       help

> > +         If you say yes here you get support for the generic Intel PECI

> > +         cputemp driver which provides Digital Thermal Sensor (DTS) thermal

> > +         readings of the CPU package and CPU cores that are accessible via

> > +         the processor PECI interface.

> > +

> > +         This driver can also be built as a module. If so, the module

> > +         will be called peci-cputemp.

> > +

> > +config SENSORS_PECI

> > +       tristate

> > diff --git a/drivers/hwmon/peci/Makefile b/drivers/hwmon/peci/Makefile

> > new file mode 100644

> > index 000000000000..e8a0ada5ab1f

> > --- /dev/null

> > +++ b/drivers/hwmon/peci/Makefile

> > @@ -0,0 +1,5 @@

> > +# SPDX-License-Identifier: GPL-2.0-only

> > +

> > +peci-cputemp-y := cputemp.o

> > +

> > +obj-$(CONFIG_SENSORS_PECI_CPUTEMP)     += peci-cputemp.o

> > diff --git a/drivers/hwmon/peci/common.h b/drivers/hwmon/peci/common.h

> > new file mode 100644

> > index 000000000000..54580c100d06

> > --- /dev/null

> > +++ b/drivers/hwmon/peci/common.h

> > @@ -0,0 +1,46 @@

> > +/* SPDX-License-Identifier: GPL-2.0-only */

> > +/* Copyright (c) 2021 Intel Corporation */

> > +

> > +#include <linux/types.h>

> > +

> > +#ifndef __PECI_HWMON_COMMON_H

> > +#define __PECI_HWMON_COMMON_H

> > +

> > +#define UPDATE_INTERVAL_DEFAULT                HZ

> > +

> > +/**

> > + * struct peci_sensor_data - PECI sensor information

> > + * @valid: flag to indicate the sensor value is valid

> > + * @value: sensor value in milli units

> > + * @last_updated: time of the last update in jiffies

> > + */

> > +struct peci_sensor_data {

> > +       unsigned int valid;

> 

> From what I can see it looks like the 'valid' member here is strictly a

> one-shot has-this-value-ever-been-set indicator, which seems a bit

> wasteful to keep around forever post initialization; couldn't the same

> information be inferred from checking last_updated != 0 or something?


That's just expressed in jiffies, which means it can overflow (we're just
unlikely to hit it - but IIUC it can happen).
Doing it this way would require making sure that last_updated is never set to 0
in code that does the update. I don't think it's worth to add more complexity
there just to save a couple of bytes.

> 

> > +       s32 value;

> > +       unsigned long last_updated;

> > +};

> > +

> > +/**

> > + * peci_sensor_need_update() - check whether sensor update is needed or not

> > + * @sensor: pointer to sensor data struct

> > + *

> > + * Return: true if update is needed, false if not.

> > + */

> > +

> > +static inline bool peci_sensor_need_update(struct peci_sensor_data *sensor)

> > +{

> > +       return !sensor->valid ||

> > +              time_after(jiffies, sensor->last_updated +

> > UPDATE_INTERVAL_DEFAULT);

> > +}

> > +

> > +/**

> > + * peci_sensor_mark_updated() - mark the sensor is updated

> > + * @sensor: pointer to sensor data struct

> > + */

> > +static inline void peci_sensor_mark_updated(struct peci_sensor_data

> > *sensor)

> > +{

> > +       sensor->valid = 1;

> > +       sensor->last_updated = jiffies;

> > +}

> > +

> > +#endif /* __PECI_HWMON_COMMON_H */

> > diff --git a/drivers/hwmon/peci/cputemp.c b/drivers/hwmon/peci/cputemp.c

> > new file mode 100644

> > index 000000000000..56a526471687

> > --- /dev/null

> > +++ b/drivers/hwmon/peci/cputemp.c

> > @@ -0,0 +1,503 @@

> > +// SPDX-License-Identifier: GPL-2.0-only

> > +// Copyright (c) 2018-2021 Intel Corporation

> > +

> > +#include <linux/auxiliary_bus.h>

> > +#include <linux/bitfield.h>

> > +#include <linux/bitops.h>

> > +#include <linux/hwmon.h>

> > +#include <linux/jiffies.h>

> > +#include <linux/module.h>

> > +#include <linux/peci.h>

> > +#include <linux/peci-cpu.h>

> > +#include <linux/units.h>

> > +#include <linux/x86/intel-family.h>

> > +

> > +#include "common.h"

> > +

> > +#define CORE_NUMS_MAX          64

> > +

> > +#define DEFAULT_CHANNEL_NUMS   5

> 

> DEFAULT_ seems like a slightly odd prefix for this (it's not something

> that can really be overridden or anything); would BASE_ perhaps be a bit

> more appropriate?


Ack.

> 

> > +#define CORETEMP_CHANNEL_NUMS  CORE_NUMS_MAX

> > +#define CPUTEMP_CHANNEL_NUMS   (DEFAULT_CHANNEL_NUMS +

> > CORETEMP_CHANNEL_NUMS)

> > +

> > +#define TEMP_TARGET_FAN_TEMP_MASK      GENMASK(15, 8)

> > +#define TEMP_TARGET_REF_TEMP_MASK      GENMASK(23, 16)

> > +#define TEMP_TARGET_TJ_OFFSET_MASK     GENMASK(29, 24)

> > +

> > +#define DTS_MARGIN_MASK                GENMASK(15, 0)

> > +#define PCS_MODULE_TEMP_MASK   GENMASK(15, 0)

> > +

> > +#define DTS_FIXED_POINT_FRACTION       64

> > +

> > +struct resolved_cores_reg {

> > +       u8 bus;

> > +       u8 dev;

> > +       u8 func;

> > +       u8 offset;

> > +};

> > +

> > +struct cpu_info {

> > +       struct resolved_cores_reg *reg;

> > +       u8 min_peci_revision;

> 

> As with the dimmtemp driver, min_peci_revision appears unused here,

> though in this case if it were removed there'd only be one (pointer)

> member left in struct cpu_info, so we could perhaps remove it as well

> and then also a level of indirection in peci_cputemp_ids/cpu_{hsx,icx}

> too?


As I mentioned in reply to previous patch comment, it'll be used to validate if
PECI device revision matches driver requirements.

> 

> > +};

> > +

> > +struct peci_cputemp {

> > +       struct peci_device *peci_dev;

> > +       struct device *dev;

> > +       const char *name;

> > +       const struct cpu_info *gen_info;

> > +       struct {

> > +               struct peci_sensor_data die;

> > +               struct peci_sensor_data dts;

> > +               struct peci_sensor_data tcontrol;

> > +               struct peci_sensor_data tthrottle;

> > +               struct peci_sensor_data tjmax;

> > +               struct peci_sensor_data core[CORETEMP_CHANNEL_NUMS];

> > +       } temp;

> > +       const char **coretemp_label;

> > +       DECLARE_BITMAP(core_mask, CORE_NUMS_MAX);

> > +};

> > +

> > +enum cputemp_channels {

> > +       channel_die,

> > +       channel_dts,

> > +       channel_tcontrol,

> > +       channel_tthrottle,

> > +       channel_tjmax,

> > +       channel_core,

> > +};

> > +

> > +static const char *cputemp_label[DEFAULT_CHANNEL_NUMS] = {

> 

> static const char * const cputemp_label?  (That is, const pointer to

> const char, rather than non-const pointer to const char.)


Ack.

> 

> > +       "Die",

> > +       "DTS",

> > +       "Tcontrol",

> > +       "Tthrottle",

> > +       "Tjmax",

> > +};

> > +

> > +static int get_temp_targets(struct peci_cputemp *priv)

> > +{

> > +       s32 tthrottle_offset, tcontrol_margin;

> > +       u32 pcs;

> > +       int ret;

> > +

> > +       /*

> > +        * Just use only the tcontrol marker to determine if target values

> > need

> > +        * update.

> > +        */

> > +       if (!peci_sensor_need_update(&priv->temp.tcontrol))

> > +               return 0;

> > +

> > +       ret = peci_pcs_read(priv->peci_dev, PECI_PCS_TEMP_TARGET, 0, &pcs);

> > +       if (ret)

> > +               return ret;

> > +

> > +       priv->temp.tjmax.value = FIELD_GET(TEMP_TARGET_REF_TEMP_MASK, pcs) *

> > MILLIDEGREE_PER_DEGREE;

> > +

> > +       tcontrol_margin = FIELD_GET(TEMP_TARGET_FAN_TEMP_MASK, pcs);

> > +       tcontrol_margin = sign_extend32(tcontrol_margin, 7) *

> > MILLIDEGREE_PER_DEGREE;

> > +       priv->temp.tcontrol.value = priv->temp.tjmax.value -

> > tcontrol_margin;

> > +

> > +       tthrottle_offset = FIELD_GET(TEMP_TARGET_TJ_OFFSET_MASK, pcs) *

> > MILLIDEGREE_PER_DEGREE;

> > +       priv->temp.tthrottle.value = priv->temp.tjmax.value -

> > tthrottle_offset;

> > +

> > +       peci_sensor_mark_updated(&priv->temp.tcontrol);

> > +

> > +       return 0;

> > +}

> > +

> > +/*

> > + * Processors return a value of DTS reading in S10.6 fixed point format

> > + * (sign, 10 bits signed integer value, 6 bits fractional).

> 

> This parenthetical reads to me like it's describing 17 bits -- I'm not a

> PECI expert, but from my reading of the (somewhat skimpy) docs I've got

> on it I'd suggest a description more like "sign, 9-bit magnitude, 6-bit

> fraction".


You're right, adding "sign" here was not intentional.
I'll change it to:
"16 bits: sign, 9-bit magnitude, 6-bit fraction"
or
"16 bits: 10-bit signed magnitude, 6-bit fraction"

Thanks
-Iwona
Guenter Roeck July 30, 2021, 10:04 p.m. UTC | #6
On 7/30/21 2:51 PM, Winiarska, Iwona wrote:
> On Tue, 2021-07-27 at 07:06 +0000, Zev Weiss wrote:

>> On Mon, Jul 12, 2021 at 05:04:44PM CDT, Iwona Winiarska wrote:

>>> Add peci-cputemp driver for Digital Thermal Sensor (DTS) thermal

>>> readings of the processor package and processor cores that are

>>> accessible via the PECI interface.

>>>

>>> The main use case for the driver (and PECI interface) is out-of-band

>>> management, where we're able to obtain the DTS readings from an external

>>> entity connected with PECI, e.g. BMC on server platforms.

>>>

>>> Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

>>> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

>>> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>

>>> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

>>> ---

>>> MAINTAINERS                  |   7 +

>>> drivers/hwmon/Kconfig        |   2 +

>>> drivers/hwmon/Makefile       |   1 +

>>> drivers/hwmon/peci/Kconfig   |  18 ++

>>> drivers/hwmon/peci/Makefile  |   5 +

>>> drivers/hwmon/peci/common.h  |  46 ++++

>>> drivers/hwmon/peci/cputemp.c | 503 +++++++++++++++++++++++++++++++++++

>>> 7 files changed, 582 insertions(+)

>>> create mode 100644 drivers/hwmon/peci/Kconfig

>>> create mode 100644 drivers/hwmon/peci/Makefile

>>> create mode 100644 drivers/hwmon/peci/common.h

>>> create mode 100644 drivers/hwmon/peci/cputemp.c

>>>

>>> diff --git a/MAINTAINERS b/MAINTAINERS

>>> index f47b5f634293..35ba9e3646bd 100644

>>> --- a/MAINTAINERS

>>> +++ b/MAINTAINERS

>>> @@ -14504,6 +14504,13 @@ L:     platform-driver-x86@vger.kernel.org

>>> S:      Maintained

>>> F:      drivers/platform/x86/peaq-wmi.c

>>>

>>> +PECI HARDWARE MONITORING DRIVERS

>>> +M:     Iwona Winiarska <iwona.winiarska@intel.com>

>>> +R:     Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

>>> +L:     linux-hwmon@vger.kernel.org

>>> +S:     Supported

>>> +F:     drivers/hwmon/peci/

>>> +

>>> PECI SUBSYSTEM

>>> M:      Iwona Winiarska <iwona.winiarska@intel.com>

>>> R:      Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

>>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig

>>> index e3675377bc5d..61c0e3404415 100644

>>> --- a/drivers/hwmon/Kconfig

>>> +++ b/drivers/hwmon/Kconfig

>>> @@ -1507,6 +1507,8 @@ config SENSORS_PCF8591

>>>            These devices are hard to detect and rarely found on mainstream

>>>            hardware. If unsure, say N.

>>>

>>> +source "drivers/hwmon/peci/Kconfig"

>>> +

>>> source "drivers/hwmon/pmbus/Kconfig"

>>>

>>> config SENSORS_PWM_FAN

>>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile

>>> index d712c61c1f5e..f52331f212ed 100644

>>> --- a/drivers/hwmon/Makefile

>>> +++ b/drivers/hwmon/Makefile

>>> @@ -202,6 +202,7 @@ obj-$(CONFIG_SENSORS_WM8350)        += wm8350-hwmon.o

>>> obj-$(CONFIG_SENSORS_XGENE)     += xgene-hwmon.o

>>>

>>> obj-$(CONFIG_SENSORS_OCC)       += occ/

>>> +obj-$(CONFIG_SENSORS_PECI)     += peci/

>>> obj-$(CONFIG_PMBUS)             += pmbus/

>>>

>>> ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG

>>> diff --git a/drivers/hwmon/peci/Kconfig b/drivers/hwmon/peci/Kconfig

>>> new file mode 100644

>>> index 000000000000..e10eed68d70a

>>> --- /dev/null

>>> +++ b/drivers/hwmon/peci/Kconfig

>>> @@ -0,0 +1,18 @@

>>> +# SPDX-License-Identifier: GPL-2.0-only

>>> +

>>> +config SENSORS_PECI_CPUTEMP

>>> +       tristate "PECI CPU temperature monitoring client"

>>> +       depends on PECI

>>> +       select SENSORS_PECI

>>> +       select PECI_CPU

>>> +       help

>>> +         If you say yes here you get support for the generic Intel PECI

>>> +         cputemp driver which provides Digital Thermal Sensor (DTS) thermal

>>> +         readings of the CPU package and CPU cores that are accessible via

>>> +         the processor PECI interface.

>>> +

>>> +         This driver can also be built as a module. If so, the module

>>> +         will be called peci-cputemp.

>>> +

>>> +config SENSORS_PECI

>>> +       tristate

>>> diff --git a/drivers/hwmon/peci/Makefile b/drivers/hwmon/peci/Makefile

>>> new file mode 100644

>>> index 000000000000..e8a0ada5ab1f

>>> --- /dev/null

>>> +++ b/drivers/hwmon/peci/Makefile

>>> @@ -0,0 +1,5 @@

>>> +# SPDX-License-Identifier: GPL-2.0-only

>>> +

>>> +peci-cputemp-y := cputemp.o

>>> +

>>> +obj-$(CONFIG_SENSORS_PECI_CPUTEMP)     += peci-cputemp.o

>>> diff --git a/drivers/hwmon/peci/common.h b/drivers/hwmon/peci/common.h

>>> new file mode 100644

>>> index 000000000000..54580c100d06

>>> --- /dev/null

>>> +++ b/drivers/hwmon/peci/common.h

>>> @@ -0,0 +1,46 @@

>>> +/* SPDX-License-Identifier: GPL-2.0-only */

>>> +/* Copyright (c) 2021 Intel Corporation */

>>> +

>>> +#include <linux/types.h>

>>> +

>>> +#ifndef __PECI_HWMON_COMMON_H

>>> +#define __PECI_HWMON_COMMON_H

>>> +

>>> +#define UPDATE_INTERVAL_DEFAULT                HZ

>>> +

>>> +/**

>>> + * struct peci_sensor_data - PECI sensor information

>>> + * @valid: flag to indicate the sensor value is valid

>>> + * @value: sensor value in milli units

>>> + * @last_updated: time of the last update in jiffies

>>> + */

>>> +struct peci_sensor_data {

>>> +       unsigned int valid;

>>

>>  From what I can see it looks like the 'valid' member here is strictly a

>> one-shot has-this-value-ever-been-set indicator, which seems a bit

>> wasteful to keep around forever post initialization; couldn't the same

>> information be inferred from checking last_updated != 0 or something?

> 

> That's just expressed in jiffies, which means it can overflow (we're just

> unlikely to hit it - but IIUC it can happen).

> Doing it this way would require making sure that last_updated is never set to 0

> in code that does the update. I don't think it's worth to add more complexity

> there just to save a couple of bytes.

> 


Correct. There are ways around that (eg by setting 'last_updated' to some time
in the past), but that isn't really worth the trouble.

'valid' should be bool, though, not "unsigned int".

Guenter

>>

>>> +       s32 value;

>>> +       unsigned long last_updated;

>>> +};

>>> +

>>> +/**

>>> + * peci_sensor_need_update() - check whether sensor update is needed or not

>>> + * @sensor: pointer to sensor data struct

>>> + *

>>> + * Return: true if update is needed, false if not.

>>> + */

>>> +

>>> +static inline bool peci_sensor_need_update(struct peci_sensor_data *sensor)

>>> +{

>>> +       return !sensor->valid ||

>>> +              time_after(jiffies, sensor->last_updated +

>>> UPDATE_INTERVAL_DEFAULT);

>>> +}

>>> +

>>> +/**

>>> + * peci_sensor_mark_updated() - mark the sensor is updated

>>> + * @sensor: pointer to sensor data struct

>>> + */

>>> +static inline void peci_sensor_mark_updated(struct peci_sensor_data

>>> *sensor)

>>> +{

>>> +       sensor->valid = 1;

>>> +       sensor->last_updated = jiffies;

>>> +}

>>> +

>>> +#endif /* __PECI_HWMON_COMMON_H */

>>> diff --git a/drivers/hwmon/peci/cputemp.c b/drivers/hwmon/peci/cputemp.c

>>> new file mode 100644

>>> index 000000000000..56a526471687

>>> --- /dev/null

>>> +++ b/drivers/hwmon/peci/cputemp.c

>>> @@ -0,0 +1,503 @@

>>> +// SPDX-License-Identifier: GPL-2.0-only

>>> +// Copyright (c) 2018-2021 Intel Corporation

>>> +

>>> +#include <linux/auxiliary_bus.h>

>>> +#include <linux/bitfield.h>

>>> +#include <linux/bitops.h>

>>> +#include <linux/hwmon.h>

>>> +#include <linux/jiffies.h>

>>> +#include <linux/module.h>

>>> +#include <linux/peci.h>

>>> +#include <linux/peci-cpu.h>

>>> +#include <linux/units.h>

>>> +#include <linux/x86/intel-family.h>

>>> +

>>> +#include "common.h"

>>> +

>>> +#define CORE_NUMS_MAX          64

>>> +

>>> +#define DEFAULT_CHANNEL_NUMS   5

>>

>> DEFAULT_ seems like a slightly odd prefix for this (it's not something

>> that can really be overridden or anything); would BASE_ perhaps be a bit

>> more appropriate?

> 

> Ack.

> 

>>

>>> +#define CORETEMP_CHANNEL_NUMS  CORE_NUMS_MAX

>>> +#define CPUTEMP_CHANNEL_NUMS   (DEFAULT_CHANNEL_NUMS +

>>> CORETEMP_CHANNEL_NUMS)

>>> +

>>> +#define TEMP_TARGET_FAN_TEMP_MASK      GENMASK(15, 8)

>>> +#define TEMP_TARGET_REF_TEMP_MASK      GENMASK(23, 16)

>>> +#define TEMP_TARGET_TJ_OFFSET_MASK     GENMASK(29, 24)

>>> +

>>> +#define DTS_MARGIN_MASK                GENMASK(15, 0)

>>> +#define PCS_MODULE_TEMP_MASK   GENMASK(15, 0)

>>> +

>>> +#define DTS_FIXED_POINT_FRACTION       64

>>> +

>>> +struct resolved_cores_reg {

>>> +       u8 bus;

>>> +       u8 dev;

>>> +       u8 func;

>>> +       u8 offset;

>>> +};

>>> +

>>> +struct cpu_info {

>>> +       struct resolved_cores_reg *reg;

>>> +       u8 min_peci_revision;

>>

>> As with the dimmtemp driver, min_peci_revision appears unused here,

>> though in this case if it were removed there'd only be one (pointer)

>> member left in struct cpu_info, so we could perhaps remove it as well

>> and then also a level of indirection in peci_cputemp_ids/cpu_{hsx,icx}

>> too?

> 

> As I mentioned in reply to previous patch comment, it'll be used to validate if

> PECI device revision matches driver requirements.

> 

>>

>>> +};

>>> +

>>> +struct peci_cputemp {

>>> +       struct peci_device *peci_dev;

>>> +       struct device *dev;

>>> +       const char *name;

>>> +       const struct cpu_info *gen_info;

>>> +       struct {

>>> +               struct peci_sensor_data die;

>>> +               struct peci_sensor_data dts;

>>> +               struct peci_sensor_data tcontrol;

>>> +               struct peci_sensor_data tthrottle;

>>> +               struct peci_sensor_data tjmax;

>>> +               struct peci_sensor_data core[CORETEMP_CHANNEL_NUMS];

>>> +       } temp;

>>> +       const char **coretemp_label;

>>> +       DECLARE_BITMAP(core_mask, CORE_NUMS_MAX);

>>> +};

>>> +

>>> +enum cputemp_channels {

>>> +       channel_die,

>>> +       channel_dts,

>>> +       channel_tcontrol,

>>> +       channel_tthrottle,

>>> +       channel_tjmax,

>>> +       channel_core,

>>> +};

>>> +

>>> +static const char *cputemp_label[DEFAULT_CHANNEL_NUMS] = {

>>

>> static const char * const cputemp_label?  (That is, const pointer to

>> const char, rather than non-const pointer to const char.)

> 

> Ack.

> 

>>

>>> +       "Die",

>>> +       "DTS",

>>> +       "Tcontrol",

>>> +       "Tthrottle",

>>> +       "Tjmax",

>>> +};

>>> +

>>> +static int get_temp_targets(struct peci_cputemp *priv)

>>> +{

>>> +       s32 tthrottle_offset, tcontrol_margin;

>>> +       u32 pcs;

>>> +       int ret;

>>> +

>>> +       /*

>>> +        * Just use only the tcontrol marker to determine if target values

>>> need

>>> +        * update.

>>> +        */

>>> +       if (!peci_sensor_need_update(&priv->temp.tcontrol))

>>> +               return 0;

>>> +

>>> +       ret = peci_pcs_read(priv->peci_dev, PECI_PCS_TEMP_TARGET, 0, &pcs);

>>> +       if (ret)

>>> +               return ret;

>>> +

>>> +       priv->temp.tjmax.value = FIELD_GET(TEMP_TARGET_REF_TEMP_MASK, pcs) *

>>> MILLIDEGREE_PER_DEGREE;

>>> +

>>> +       tcontrol_margin = FIELD_GET(TEMP_TARGET_FAN_TEMP_MASK, pcs);

>>> +       tcontrol_margin = sign_extend32(tcontrol_margin, 7) *

>>> MILLIDEGREE_PER_DEGREE;

>>> +       priv->temp.tcontrol.value = priv->temp.tjmax.value -

>>> tcontrol_margin;

>>> +

>>> +       tthrottle_offset = FIELD_GET(TEMP_TARGET_TJ_OFFSET_MASK, pcs) *

>>> MILLIDEGREE_PER_DEGREE;

>>> +       priv->temp.tthrottle.value = priv->temp.tjmax.value -

>>> tthrottle_offset;

>>> +

>>> +       peci_sensor_mark_updated(&priv->temp.tcontrol);

>>> +

>>> +       return 0;

>>> +}

>>> +

>>> +/*

>>> + * Processors return a value of DTS reading in S10.6 fixed point format

>>> + * (sign, 10 bits signed integer value, 6 bits fractional).

>>

>> This parenthetical reads to me like it's describing 17 bits -- I'm not a

>> PECI expert, but from my reading of the (somewhat skimpy) docs I've got

>> on it I'd suggest a description more like "sign, 9-bit magnitude, 6-bit

>> fraction".

> 

> You're right, adding "sign" here was not intentional.

> I'll change it to:

> "16 bits: sign, 9-bit magnitude, 6-bit fraction"

> or

> "16 bits: 10-bit signed magnitude, 6-bit fraction"

> 

> Thanks

> -Iwona

>
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index f47b5f634293..35ba9e3646bd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14504,6 +14504,13 @@  L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/peaq-wmi.c
 
+PECI HARDWARE MONITORING DRIVERS
+M:	Iwona Winiarska <iwona.winiarska@intel.com>
+R:	Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Supported
+F:	drivers/hwmon/peci/
+
 PECI SUBSYSTEM
 M:	Iwona Winiarska <iwona.winiarska@intel.com>
 R:	Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e3675377bc5d..61c0e3404415 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1507,6 +1507,8 @@  config SENSORS_PCF8591
 	  These devices are hard to detect and rarely found on mainstream
 	  hardware. If unsure, say N.
 
+source "drivers/hwmon/peci/Kconfig"
+
 source "drivers/hwmon/pmbus/Kconfig"
 
 config SENSORS_PWM_FAN
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d712c61c1f5e..f52331f212ed 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -202,6 +202,7 @@  obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
 obj-$(CONFIG_SENSORS_XGENE)	+= xgene-hwmon.o
 
 obj-$(CONFIG_SENSORS_OCC)	+= occ/
+obj-$(CONFIG_SENSORS_PECI)	+= peci/
 obj-$(CONFIG_PMBUS)		+= pmbus/
 
 ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
diff --git a/drivers/hwmon/peci/Kconfig b/drivers/hwmon/peci/Kconfig
new file mode 100644
index 000000000000..e10eed68d70a
--- /dev/null
+++ b/drivers/hwmon/peci/Kconfig
@@ -0,0 +1,18 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+
+config SENSORS_PECI_CPUTEMP
+	tristate "PECI CPU temperature monitoring client"
+	depends on PECI
+	select SENSORS_PECI
+	select PECI_CPU
+	help
+	  If you say yes here you get support for the generic Intel PECI
+	  cputemp driver which provides Digital Thermal Sensor (DTS) thermal
+	  readings of the CPU package and CPU cores that are accessible via
+	  the processor PECI interface.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called peci-cputemp.
+
+config SENSORS_PECI
+	tristate
diff --git a/drivers/hwmon/peci/Makefile b/drivers/hwmon/peci/Makefile
new file mode 100644
index 000000000000..e8a0ada5ab1f
--- /dev/null
+++ b/drivers/hwmon/peci/Makefile
@@ -0,0 +1,5 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+
+peci-cputemp-y := cputemp.o
+
+obj-$(CONFIG_SENSORS_PECI_CPUTEMP)	+= peci-cputemp.o
diff --git a/drivers/hwmon/peci/common.h b/drivers/hwmon/peci/common.h
new file mode 100644
index 000000000000..54580c100d06
--- /dev/null
+++ b/drivers/hwmon/peci/common.h
@@ -0,0 +1,46 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2021 Intel Corporation */
+
+#include <linux/types.h>
+
+#ifndef __PECI_HWMON_COMMON_H
+#define __PECI_HWMON_COMMON_H
+
+#define UPDATE_INTERVAL_DEFAULT		HZ
+
+/**
+ * struct peci_sensor_data - PECI sensor information
+ * @valid: flag to indicate the sensor value is valid
+ * @value: sensor value in milli units
+ * @last_updated: time of the last update in jiffies
+ */
+struct peci_sensor_data {
+	unsigned int valid;
+	s32 value;
+	unsigned long last_updated;
+};
+
+/**
+ * peci_sensor_need_update() - check whether sensor update is needed or not
+ * @sensor: pointer to sensor data struct
+ *
+ * Return: true if update is needed, false if not.
+ */
+
+static inline bool peci_sensor_need_update(struct peci_sensor_data *sensor)
+{
+	return !sensor->valid ||
+	       time_after(jiffies, sensor->last_updated + UPDATE_INTERVAL_DEFAULT);
+}
+
+/**
+ * peci_sensor_mark_updated() - mark the sensor is updated
+ * @sensor: pointer to sensor data struct
+ */
+static inline void peci_sensor_mark_updated(struct peci_sensor_data *sensor)
+{
+	sensor->valid = 1;
+	sensor->last_updated = jiffies;
+}
+
+#endif /* __PECI_HWMON_COMMON_H */
diff --git a/drivers/hwmon/peci/cputemp.c b/drivers/hwmon/peci/cputemp.c
new file mode 100644
index 000000000000..56a526471687
--- /dev/null
+++ b/drivers/hwmon/peci/cputemp.c
@@ -0,0 +1,503 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2018-2021 Intel Corporation
+
+#include <linux/auxiliary_bus.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/peci.h>
+#include <linux/peci-cpu.h>
+#include <linux/units.h>
+#include <linux/x86/intel-family.h>
+
+#include "common.h"
+
+#define CORE_NUMS_MAX		64
+
+#define DEFAULT_CHANNEL_NUMS	5
+#define CORETEMP_CHANNEL_NUMS	CORE_NUMS_MAX
+#define CPUTEMP_CHANNEL_NUMS	(DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)
+
+#define TEMP_TARGET_FAN_TEMP_MASK	GENMASK(15, 8)
+#define TEMP_TARGET_REF_TEMP_MASK	GENMASK(23, 16)
+#define TEMP_TARGET_TJ_OFFSET_MASK	GENMASK(29, 24)
+
+#define DTS_MARGIN_MASK		GENMASK(15, 0)
+#define PCS_MODULE_TEMP_MASK	GENMASK(15, 0)
+
+#define DTS_FIXED_POINT_FRACTION	64
+
+struct resolved_cores_reg {
+	u8 bus;
+	u8 dev;
+	u8 func;
+	u8 offset;
+};
+
+struct cpu_info {
+	struct resolved_cores_reg *reg;
+	u8 min_peci_revision;
+};
+
+struct peci_cputemp {
+	struct peci_device *peci_dev;
+	struct device *dev;
+	const char *name;
+	const struct cpu_info *gen_info;
+	struct {
+		struct peci_sensor_data die;
+		struct peci_sensor_data dts;
+		struct peci_sensor_data tcontrol;
+		struct peci_sensor_data tthrottle;
+		struct peci_sensor_data tjmax;
+		struct peci_sensor_data core[CORETEMP_CHANNEL_NUMS];
+	} temp;
+	const char **coretemp_label;
+	DECLARE_BITMAP(core_mask, CORE_NUMS_MAX);
+};
+
+enum cputemp_channels {
+	channel_die,
+	channel_dts,
+	channel_tcontrol,
+	channel_tthrottle,
+	channel_tjmax,
+	channel_core,
+};
+
+static const char *cputemp_label[DEFAULT_CHANNEL_NUMS] = {
+	"Die",
+	"DTS",
+	"Tcontrol",
+	"Tthrottle",
+	"Tjmax",
+};
+
+static int get_temp_targets(struct peci_cputemp *priv)
+{
+	s32 tthrottle_offset, tcontrol_margin;
+	u32 pcs;
+	int ret;
+
+	/*
+	 * Just use only the tcontrol marker to determine if target values need
+	 * update.
+	 */
+	if (!peci_sensor_need_update(&priv->temp.tcontrol))
+		return 0;
+
+	ret = peci_pcs_read(priv->peci_dev, PECI_PCS_TEMP_TARGET, 0, &pcs);
+	if (ret)
+		return ret;
+
+	priv->temp.tjmax.value = FIELD_GET(TEMP_TARGET_REF_TEMP_MASK, pcs) * MILLIDEGREE_PER_DEGREE;
+
+	tcontrol_margin = FIELD_GET(TEMP_TARGET_FAN_TEMP_MASK, pcs);
+	tcontrol_margin = sign_extend32(tcontrol_margin, 7) * MILLIDEGREE_PER_DEGREE;
+	priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;
+
+	tthrottle_offset = FIELD_GET(TEMP_TARGET_TJ_OFFSET_MASK, pcs) * MILLIDEGREE_PER_DEGREE;
+	priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;
+
+	peci_sensor_mark_updated(&priv->temp.tcontrol);
+
+	return 0;
+}
+
+/*
+ * Processors return a value of DTS reading in S10.6 fixed point format
+ * (sign, 10 bits signed integer value, 6 bits fractional).
+ * Error codes:
+ *   0x8000: General sensor error
+ *   0x8001: Reserved
+ *   0x8002: Underflow on reading value
+ *   0x8003-0x81ff: Reserved
+ */
+static bool dts_valid(s32 val)
+{
+	return val < 0x8000 || val > 0x81ff;
+}
+
+static s32 dts_to_millidegree(s32 val)
+{
+	return sign_extend32(val, 15) * MILLIDEGREE_PER_DEGREE / DTS_FIXED_POINT_FRACTION;
+}
+
+static int get_die_temp(struct peci_cputemp *priv)
+{
+	s16 temp;
+	int ret;
+
+	if (!peci_sensor_need_update(&priv->temp.die))
+		return 0;
+
+	ret = peci_temp_read(priv->peci_dev, &temp);
+	if (ret)
+		return ret;
+
+	if (!dts_valid(temp))
+		return -EIO;
+
+	/* Note that the tjmax should be available before calling it */
+	priv->temp.die.value = priv->temp.tjmax.value + dts_to_millidegree(temp);
+
+	peci_sensor_mark_updated(&priv->temp.die);
+
+	return 0;
+}
+
+static int get_dts(struct peci_cputemp *priv)
+{
+	s32 dts_margin;
+	u32 pcs;
+	int ret;
+
+	if (!peci_sensor_need_update(&priv->temp.dts))
+		return 0;
+
+	ret = peci_pcs_read(priv->peci_dev, PECI_PCS_THERMAL_MARGIN, 0, &pcs);
+	if (ret)
+		return ret;
+
+	dts_margin = FIELD_GET(DTS_MARGIN_MASK, pcs);
+	if (!dts_valid(dts_margin))
+		return -EIO;
+
+	/* Note that the tcontrol should be available before calling it */
+	priv->temp.dts.value = priv->temp.tcontrol.value - dts_to_millidegree(dts_margin);
+
+	peci_sensor_mark_updated(&priv->temp.dts);
+
+	return 0;
+}
+
+static int get_core_temp(struct peci_cputemp *priv, int core_index)
+{
+	s32 core_dts_margin;
+	u32 pcs;
+	int ret;
+
+	if (!peci_sensor_need_update(&priv->temp.core[core_index]))
+		return 0;
+
+	ret = peci_pcs_read(priv->peci_dev, PECI_PCS_MODULE_TEMP, core_index, &pcs);
+	if (ret)
+		return ret;
+
+	core_dts_margin = FIELD_GET(PCS_MODULE_TEMP_MASK, pcs);
+	if (!dts_valid(core_dts_margin))
+		return -EIO;
+
+	/* Note that the tjmax should be available before calling it */
+	priv->temp.core[core_index].value =
+		priv->temp.tjmax.value + dts_to_millidegree(core_dts_margin);
+
+	peci_sensor_mark_updated(&priv->temp.core[core_index]);
+
+	return 0;
+}
+
+static int cputemp_read_string(struct device *dev, enum hwmon_sensor_types type,
+			       u32 attr, int channel, const char **str)
+{
+	struct peci_cputemp *priv = dev_get_drvdata(dev);
+
+	if (attr != hwmon_temp_label)
+		return -EOPNOTSUPP;
+
+	*str = channel < channel_core ?
+		cputemp_label[channel] : priv->coretemp_label[channel - channel_core];
+
+	return 0;
+}
+
+static int cputemp_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	struct peci_cputemp *priv = dev_get_drvdata(dev);
+	int ret, core_index;
+
+	ret = get_temp_targets(priv);
+	if (ret)
+		return ret;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		switch (channel) {
+		case channel_die:
+			ret = get_die_temp(priv);
+			if (ret)
+				return ret;
+
+			*val = priv->temp.die.value;
+			break;
+		case channel_dts:
+			ret = get_dts(priv);
+			if (ret)
+				return ret;
+
+			*val = priv->temp.dts.value;
+			break;
+		case channel_tcontrol:
+			*val = priv->temp.tcontrol.value;
+			break;
+		case channel_tthrottle:
+			*val = priv->temp.tthrottle.value;
+			break;
+		case channel_tjmax:
+			*val = priv->temp.tjmax.value;
+			break;
+		default:
+			core_index = channel - channel_core;
+			ret = get_core_temp(priv, core_index);
+			if (ret)
+				return ret;
+
+			*val = priv->temp.core[core_index].value;
+			break;
+		}
+		break;
+	case hwmon_temp_max:
+		*val = priv->temp.tcontrol.value;
+		break;
+	case hwmon_temp_crit:
+		*val = priv->temp.tjmax.value;
+		break;
+	case hwmon_temp_crit_hyst:
+		*val = priv->temp.tjmax.value - priv->temp.tcontrol.value;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static umode_t cputemp_is_visible(const void *data, enum hwmon_sensor_types type,
+				  u32 attr, int channel)
+{
+	const struct peci_cputemp *priv = data;
+
+	if (channel > CPUTEMP_CHANNEL_NUMS)
+		return 0;
+
+	if (channel < channel_core)
+		return 0444;
+
+	if (test_bit(channel - channel_core, priv->core_mask))
+		return 0444;
+
+	return 0;
+}
+
+static int init_core_mask(struct peci_cputemp *priv)
+{
+	struct peci_device *peci_dev = priv->peci_dev;
+	struct resolved_cores_reg *reg = priv->gen_info->reg;
+	u64 core_mask;
+	u32 data;
+	int ret;
+
+	/* Get the RESOLVED_CORES register value */
+	switch (peci_dev->info.model) {
+	case INTEL_FAM6_ICELAKE_X:
+	case INTEL_FAM6_ICELAKE_D:
+		ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,
+					     reg->func, reg->offset + 4, &data);
+		if (ret)
+			return ret;
+
+		core_mask = (u64)data << 32;
+
+		ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,
+					     reg->func, reg->offset, &data);
+		if (ret)
+			return ret;
+
+		core_mask |= data;
+
+		break;
+	default:
+		ret = peci_pci_local_read(peci_dev, reg->bus, reg->dev,
+					  reg->func, reg->offset, &data);
+		if (ret)
+			return ret;
+
+		core_mask = data;
+
+		break;
+	}
+
+	if (!core_mask)
+		return -EIO;
+
+	bitmap_from_u64(priv->core_mask, core_mask);
+
+	return 0;
+}
+
+static int create_temp_label(struct peci_cputemp *priv)
+{
+	unsigned long core_max = find_last_bit(priv->core_mask, CORE_NUMS_MAX);
+	int i;
+
+	priv->coretemp_label = devm_kzalloc(priv->dev, core_max * sizeof(char *), GFP_KERNEL);
+	if (!priv->coretemp_label)
+		return -ENOMEM;
+
+	for_each_set_bit(i, priv->core_mask, CORE_NUMS_MAX) {
+		priv->coretemp_label[i] = devm_kasprintf(priv->dev, GFP_KERNEL, "Core %d", i);
+		if (!priv->coretemp_label[i])
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void check_resolved_cores(struct peci_cputemp *priv)
+{
+	int ret;
+
+	ret = init_core_mask(priv);
+	if (ret)
+		return;
+
+	ret = create_temp_label(priv);
+	if (ret)
+		bitmap_zero(priv->core_mask, CORE_NUMS_MAX);
+}
+
+static const struct hwmon_ops peci_cputemp_ops = {
+	.is_visible = cputemp_is_visible,
+	.read_string = cputemp_read_string,
+	.read = cputemp_read,
+};
+
+static const u32 peci_cputemp_temp_channel_config[] = {
+	/* Die temperature */
+	HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | HWMON_T_CRIT_HYST,
+	/* DTS margin */
+	HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | HWMON_T_CRIT_HYST,
+	/* Tcontrol temperature */
+	HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,
+	/* Tthrottle temperature */
+	HWMON_T_LABEL | HWMON_T_INPUT,
+	/* Tjmax temperature */
+	HWMON_T_LABEL | HWMON_T_INPUT,
+	/* Core temperature - for all core channels */
+	[channel_core ... CPUTEMP_CHANNEL_NUMS - 1] = HWMON_T_LABEL | HWMON_T_INPUT,
+	0
+};
+
+static const struct hwmon_channel_info peci_cputemp_temp_channel = {
+	.type = hwmon_temp,
+	.config = peci_cputemp_temp_channel_config,
+};
+
+static const struct hwmon_channel_info *peci_cputemp_info[] = {
+	&peci_cputemp_temp_channel,
+	NULL
+};
+
+static const struct hwmon_chip_info peci_cputemp_chip_info = {
+	.ops = &peci_cputemp_ops,
+	.info = peci_cputemp_info,
+};
+
+static int peci_cputemp_probe(struct auxiliary_device *adev,
+			      const struct auxiliary_device_id *id)
+{
+	struct device *dev = &adev->dev;
+	struct peci_device *peci_dev = to_peci_device(dev->parent);
+	struct peci_cputemp *priv;
+	struct device *hwmon_dev;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->name = devm_kasprintf(dev, GFP_KERNEL, "peci_cputemp.cpu%d",
+				    peci_dev->info.socket_id);
+	if (!priv->name)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, priv);
+	priv->dev = dev;
+	priv->peci_dev = peci_dev;
+	priv->gen_info = (const struct cpu_info *)id->driver_data;
+
+	check_resolved_cores(priv);
+
+	hwmon_dev = devm_hwmon_device_register_with_info(priv->dev, priv->name,
+							 priv, &peci_cputemp_chip_info, NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static struct resolved_cores_reg resolved_cores_reg_hsx = {
+	.bus = 1,
+	.dev = 30,
+	.func = 3,
+	.offset = 0xb4,
+};
+
+static struct resolved_cores_reg resolved_cores_reg_icx = {
+	.bus = 14,
+	.dev = 30,
+	.func = 3,
+	.offset = 0xd0,
+};
+
+static const struct cpu_info cpu_hsx = {
+	.reg		= &resolved_cores_reg_hsx,
+	.min_peci_revision = 0x30,
+};
+
+static const struct cpu_info cpu_icx = {
+	.reg		= &resolved_cores_reg_icx,
+	.min_peci_revision = 0x40,
+};
+
+static const struct auxiliary_device_id peci_cputemp_ids[] = {
+	{
+		.name = "peci_cpu.cputemp.hsx",
+		.driver_data = (kernel_ulong_t)&cpu_hsx,
+	},
+	{
+		.name = "peci_cpu.cputemp.bdx",
+		.driver_data = (kernel_ulong_t)&cpu_hsx,
+	},
+	{
+		.name = "peci_cpu.cputemp.bdxd",
+		.driver_data = (kernel_ulong_t)&cpu_hsx,
+	},
+	{
+		.name = "peci_cpu.cputemp.skx",
+		.driver_data = (kernel_ulong_t)&cpu_hsx,
+	},
+	{
+		.name = "peci_cpu.cputemp.icx",
+		.driver_data = (kernel_ulong_t)&cpu_icx,
+	},
+	{
+		.name = "peci_cpu.cputemp.icxd",
+		.driver_data = (kernel_ulong_t)&cpu_icx,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(auxiliary, peci_cputemp_ids);
+
+static struct auxiliary_driver peci_cputemp_driver = {
+	.probe		= peci_cputemp_probe,
+	.id_table	= peci_cputemp_ids,
+};
+
+module_auxiliary_driver(peci_cputemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska@intel.com>");
+MODULE_DESCRIPTION("PECI cputemp driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PECI_CPU);