diff mbox series

[v3,2/2] usb: typec: tcpm: Support non-PD mode

Message ID 20210728092930.2552619-3-kyletso@google.com
State New
Headers show
Series TCPM non-pd mode | expand

Commit Message

Kyle Tso July 28, 2021, 9:29 a.m. UTC
Even if the Type-C controller supports PD, it is doable to disable PD
capabilities with the current state machine in TCPM. Without enabling RX
in low-level drivers and with skipping the power negotiation, the port
is eligible to be a non-PD Type-C port. Use new flags whose values are
populated from the device tree to decide the port PD capability. Adding
"pd-unsupported" property in device tree indicates that the port does
not support PD. If "pd-unsupported" is not found, "typec-power-opmode"
shall be added to specify the advertised Rp value if the port supports
SRC role.

Signed-off-by: Kyle Tso <kyletso@google.com>
---
changes since v2:
- Changed the control flow if the port is SNK or DRP. Return directly if
  the flag is false (PD not supported). Read "self-powered" before that.

 drivers/usb/typec/tcpm/tcpm.c | 88 ++++++++++++++++++++++++++++-------
 1 file changed, 70 insertions(+), 18 deletions(-)

Comments

Guenter Roeck July 28, 2021, 2:31 p.m. UTC | #1
On 7/28/21 2:29 AM, Kyle Tso wrote:
> Even if the Type-C controller supports PD, it is doable to disable PD
> capabilities with the current state machine in TCPM. Without enabling RX
> in low-level drivers and with skipping the power negotiation, the port
> is eligible to be a non-PD Type-C port. Use new flags whose values are
> populated from the device tree to decide the port PD capability. Adding
> "pd-unsupported" property in device tree indicates that the port does
> not support PD. If "pd-unsupported" is not found, "typec-power-opmode"

"is not found" -> "is found" (based on previous revision)

I think "If PD is not supported, ..." might be a better wording and
avoid the use of a property name here.

> shall be added to specify the advertised Rp value if the port supports
> SRC role.
> 
> Signed-off-by: Kyle Tso <kyletso@google.com>
> ---
> changes since v2:
> - Changed the control flow if the port is SNK or DRP. Return directly if
>    the flag is false (PD not supported). Read "self-powered" before that.
> 
>   drivers/usb/typec/tcpm/tcpm.c | 88 ++++++++++++++++++++++++++++-------
>   1 file changed, 70 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 5b22a1c931a9..d8d6ef8c6282 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -316,6 +316,7 @@ struct tcpm_port {
>   	struct typec_partner *partner;
>   
>   	enum typec_cc_status cc_req;
> +	enum typec_cc_status src_rp;	/* work only if pd_supported == false */
>   
>   	enum typec_cc_status cc1;
>   	enum typec_cc_status cc2;
> @@ -323,6 +324,7 @@ struct tcpm_port {
>   
>   	bool attached;
>   	bool connected;
> +	bool pd_supported;
>   	enum typec_port_type port_type;
>   
>   	/*
> @@ -804,6 +806,7 @@ static void tcpm_apply_rc(struct tcpm_port *port)
>   	}
>   }
>   
> +

stray empty line

>   /*
>    * Determine RP value to set based on maximum current supported
>    * by a port if configured as source.
> @@ -815,6 +818,9 @@ static enum typec_cc_status tcpm_rp_cc(struct tcpm_port *port)
>   	int nr_pdo = port->nr_src_pdo;
>   	int i;
>   
> +	if (!port->pd_supported)
> +		return port->src_rp;
> +
>   	/*
>   	 * Search for first entry with matching voltage.
>   	 * It should report the maximum supported current.
> @@ -3568,9 +3574,11 @@ static int tcpm_src_attach(struct tcpm_port *port)
>   	if (ret < 0)
>   		return ret;
>   
> -	ret = port->tcpc->set_pd_rx(port->tcpc, true);
> -	if (ret < 0)
> -		goto out_disable_mux;
> +	if (port->pd_supported) {
> +		ret = port->tcpc->set_pd_rx(port->tcpc, true);
> +		if (ret < 0)
> +			goto out_disable_mux;
> +	}
>   
>   	/*
>   	 * USB Type-C specification, version 1.2,
> @@ -3600,7 +3608,8 @@ static int tcpm_src_attach(struct tcpm_port *port)
>   out_disable_vconn:
>   	tcpm_set_vconn(port, false);
>   out_disable_pd:
> -	port->tcpc->set_pd_rx(port->tcpc, false);
> +	if (port->pd_supported)
> +		port->tcpc->set_pd_rx(port->tcpc, false);
>   out_disable_mux:
>   	tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE,
>   		     TYPEC_ORIENTATION_NONE);
> @@ -3804,6 +3813,20 @@ static enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc)
>   	}
>   }
>   
> +static enum typec_cc_status tcpm_pwr_opmode_to_rp(enum typec_pwr_opmode opmode)
> +{
> +	switch (opmode) {
> +	case TYPEC_PWR_MODE_USB:
> +		return TYPEC_CC_RP_DEF;
> +	case TYPEC_PWR_MODE_1_5A:
> +		return TYPEC_CC_RP_1_5;
> +	case TYPEC_PWR_MODE_3_0A:
> +	case TYPEC_PWR_MODE_PD:
> +	default:
> +		return TYPEC_CC_RP_3_0;
> +	}
> +}
> +
>   static void run_state_machine(struct tcpm_port *port)
>   {
>   	int ret;
> @@ -3914,6 +3937,10 @@ static void run_state_machine(struct tcpm_port *port)
>   		if (port->ams == POWER_ROLE_SWAP ||
>   		    port->ams == FAST_ROLE_SWAP)
>   			tcpm_ams_finish(port);
> +		if (!port->pd_supported) {
> +			tcpm_set_state(port, SRC_READY, 0);
> +			break;
> +		}
>   		port->upcoming_state = SRC_SEND_CAPABILITIES;
>   		tcpm_ams_start(port, POWER_NEGOTIATION);
>   		break;
> @@ -4161,7 +4188,10 @@ static void run_state_machine(struct tcpm_port *port)
>   				current_lim = PD_P_SNK_STDBY_MW / 5;
>   			tcpm_set_current_limit(port, current_lim, 5000);
>   			tcpm_set_charge(port, true);
> -			tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
> +			if (!port->pd_supported)
> +				tcpm_set_state(port, SNK_READY, 0);
> +			else
> +				tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
>   			break;
>   		}
>   		/*
> @@ -4389,7 +4419,8 @@ static void run_state_machine(struct tcpm_port *port)
>   		tcpm_set_vbus(port, true);
>   		if (port->ams == HARD_RESET)
>   			tcpm_ams_finish(port);
> -		port->tcpc->set_pd_rx(port->tcpc, true);
> +		if (port->pd_supported)
> +			port->tcpc->set_pd_rx(port->tcpc, true);
>   		tcpm_set_attached_state(port, true);
>   		tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON);
>   		break;
> @@ -5898,6 +5929,7 @@ EXPORT_SYMBOL_GPL(tcpm_tcpc_reset);
>   static int tcpm_fw_get_caps(struct tcpm_port *port,
>   			    struct fwnode_handle *fwnode)
>   {
> +	const char *opmode_str;
>   	const char *cap_str;
>   	int ret;
>   	u32 mw, frs_current;
> @@ -5932,22 +5964,37 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
>   		return ret;
>   	port->typec_caps.type = ret;
>   	port->port_type = port->typec_caps.type;
> +	port->pd_supported = !fwnode_property_read_bool(fwnode, "pd-unsupported");
>   
>   	port->slow_charger_loop = fwnode_property_read_bool(fwnode, "slow-charger-loop");
> +

Unnecessary whitespace change

>   	if (port->port_type == TYPEC_PORT_SNK)
>   		goto sink;
>   
>   	/* Get source pdos */
> -	ret = fwnode_property_count_u32(fwnode, "source-pdos");
> -	if (ret <= 0)
> -		return -EINVAL;
> +	if (port->pd_supported) {
> +		ret = fwnode_property_count_u32(fwnode, "source-pdos");
> +		if (ret <= 0)
> +			return -EINVAL;
>   
> -	port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
> -	ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
> -					     port->src_pdo, port->nr_src_pdo);
> -	if ((ret < 0) || tcpm_validate_caps(port, port->src_pdo,
> -					    port->nr_src_pdo))
> -		return -EINVAL;
> +		port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
> +		ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
> +						     port->src_pdo, port->nr_src_pdo);
> +		if ((ret < 0) || tcpm_validate_caps(port, port->src_pdo,
> +						    port->nr_src_pdo))

Since we are changing this code, might as well get rid of the unnecessary ()
around 'ret < 0'. Or, even better,

		if (ret)
			return ret;
		ret = tcpm_validate_caps(port, port->src_pdo, port->nr_src_pdo);
		if (ret)
			return ret;

because that avoids overwriting the error return code from
fwnode_property_read_u32_array().

> +			return -EINVAL;
> +	} else {
> +		port->nr_src_pdo = 0;

That should be unnecessary.

> +		ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &opmode_str);
> +		if (ret == 0) {
> +			ret = typec_find_pwr_opmode(opmode_str);
> +			if (ret < 0)
> +				return ret;
> +			port->src_rp = tcpm_pwr_opmode_to_rp(ret);
> +		} else {
> +			return ret;
> +		}

I prefer 'normal' error handling.
		if (ret)
			return ret;
		ret = typec_find_pwr_opmode(opmode_str);
		...

> +	}
>   
>   	if (port->port_type == TYPEC_PORT_SRC)
>   		return 0;
> @@ -5961,6 +6008,13 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
>   	if (port->typec_caps.prefer_role < 0)
>   		return -EINVAL;
>   sink:
> +	port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
> +
> +	if (!port->pd_supported) {
> +		port->nr_snk_pdo = 0;

Should be unnecessary.

> +		return 0;
> +	}
> +
>   	/* Get sink pdos */
>   	ret = fwnode_property_count_u32(fwnode, "sink-pdos");
>   	if (ret <= 0)
> @@ -5977,9 +6031,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
>   		return -EINVAL;
>   	port->operating_snk_mw = mw / 1000;
>   
> -	port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
> -
> -	/* FRS can only be supported byb DRP ports */
> +	/* FRS can only be supported by DRP ports */
>   	if (port->port_type == TYPEC_PORT_DRP) {
>   		ret = fwnode_property_read_u32(fwnode, "new-source-frs-typec-current",
>   					       &frs_current);
>
diff mbox series

Patch

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 5b22a1c931a9..d8d6ef8c6282 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -316,6 +316,7 @@  struct tcpm_port {
 	struct typec_partner *partner;
 
 	enum typec_cc_status cc_req;
+	enum typec_cc_status src_rp;	/* work only if pd_supported == false */
 
 	enum typec_cc_status cc1;
 	enum typec_cc_status cc2;
@@ -323,6 +324,7 @@  struct tcpm_port {
 
 	bool attached;
 	bool connected;
+	bool pd_supported;
 	enum typec_port_type port_type;
 
 	/*
@@ -804,6 +806,7 @@  static void tcpm_apply_rc(struct tcpm_port *port)
 	}
 }
 
+
 /*
  * Determine RP value to set based on maximum current supported
  * by a port if configured as source.
@@ -815,6 +818,9 @@  static enum typec_cc_status tcpm_rp_cc(struct tcpm_port *port)
 	int nr_pdo = port->nr_src_pdo;
 	int i;
 
+	if (!port->pd_supported)
+		return port->src_rp;
+
 	/*
 	 * Search for first entry with matching voltage.
 	 * It should report the maximum supported current.
@@ -3568,9 +3574,11 @@  static int tcpm_src_attach(struct tcpm_port *port)
 	if (ret < 0)
 		return ret;
 
-	ret = port->tcpc->set_pd_rx(port->tcpc, true);
-	if (ret < 0)
-		goto out_disable_mux;
+	if (port->pd_supported) {
+		ret = port->tcpc->set_pd_rx(port->tcpc, true);
+		if (ret < 0)
+			goto out_disable_mux;
+	}
 
 	/*
 	 * USB Type-C specification, version 1.2,
@@ -3600,7 +3608,8 @@  static int tcpm_src_attach(struct tcpm_port *port)
 out_disable_vconn:
 	tcpm_set_vconn(port, false);
 out_disable_pd:
-	port->tcpc->set_pd_rx(port->tcpc, false);
+	if (port->pd_supported)
+		port->tcpc->set_pd_rx(port->tcpc, false);
 out_disable_mux:
 	tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE,
 		     TYPEC_ORIENTATION_NONE);
@@ -3804,6 +3813,20 @@  static enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc)
 	}
 }
 
+static enum typec_cc_status tcpm_pwr_opmode_to_rp(enum typec_pwr_opmode opmode)
+{
+	switch (opmode) {
+	case TYPEC_PWR_MODE_USB:
+		return TYPEC_CC_RP_DEF;
+	case TYPEC_PWR_MODE_1_5A:
+		return TYPEC_CC_RP_1_5;
+	case TYPEC_PWR_MODE_3_0A:
+	case TYPEC_PWR_MODE_PD:
+	default:
+		return TYPEC_CC_RP_3_0;
+	}
+}
+
 static void run_state_machine(struct tcpm_port *port)
 {
 	int ret;
@@ -3914,6 +3937,10 @@  static void run_state_machine(struct tcpm_port *port)
 		if (port->ams == POWER_ROLE_SWAP ||
 		    port->ams == FAST_ROLE_SWAP)
 			tcpm_ams_finish(port);
+		if (!port->pd_supported) {
+			tcpm_set_state(port, SRC_READY, 0);
+			break;
+		}
 		port->upcoming_state = SRC_SEND_CAPABILITIES;
 		tcpm_ams_start(port, POWER_NEGOTIATION);
 		break;
@@ -4161,7 +4188,10 @@  static void run_state_machine(struct tcpm_port *port)
 				current_lim = PD_P_SNK_STDBY_MW / 5;
 			tcpm_set_current_limit(port, current_lim, 5000);
 			tcpm_set_charge(port, true);
-			tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
+			if (!port->pd_supported)
+				tcpm_set_state(port, SNK_READY, 0);
+			else
+				tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
 			break;
 		}
 		/*
@@ -4389,7 +4419,8 @@  static void run_state_machine(struct tcpm_port *port)
 		tcpm_set_vbus(port, true);
 		if (port->ams == HARD_RESET)
 			tcpm_ams_finish(port);
-		port->tcpc->set_pd_rx(port->tcpc, true);
+		if (port->pd_supported)
+			port->tcpc->set_pd_rx(port->tcpc, true);
 		tcpm_set_attached_state(port, true);
 		tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON);
 		break;
@@ -5898,6 +5929,7 @@  EXPORT_SYMBOL_GPL(tcpm_tcpc_reset);
 static int tcpm_fw_get_caps(struct tcpm_port *port,
 			    struct fwnode_handle *fwnode)
 {
+	const char *opmode_str;
 	const char *cap_str;
 	int ret;
 	u32 mw, frs_current;
@@ -5932,22 +5964,37 @@  static int tcpm_fw_get_caps(struct tcpm_port *port,
 		return ret;
 	port->typec_caps.type = ret;
 	port->port_type = port->typec_caps.type;
+	port->pd_supported = !fwnode_property_read_bool(fwnode, "pd-unsupported");
 
 	port->slow_charger_loop = fwnode_property_read_bool(fwnode, "slow-charger-loop");
+
 	if (port->port_type == TYPEC_PORT_SNK)
 		goto sink;
 
 	/* Get source pdos */
-	ret = fwnode_property_count_u32(fwnode, "source-pdos");
-	if (ret <= 0)
-		return -EINVAL;
+	if (port->pd_supported) {
+		ret = fwnode_property_count_u32(fwnode, "source-pdos");
+		if (ret <= 0)
+			return -EINVAL;
 
-	port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
-	ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
-					     port->src_pdo, port->nr_src_pdo);
-	if ((ret < 0) || tcpm_validate_caps(port, port->src_pdo,
-					    port->nr_src_pdo))
-		return -EINVAL;
+		port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
+		ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
+						     port->src_pdo, port->nr_src_pdo);
+		if ((ret < 0) || tcpm_validate_caps(port, port->src_pdo,
+						    port->nr_src_pdo))
+			return -EINVAL;
+	} else {
+		port->nr_src_pdo = 0;
+		ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &opmode_str);
+		if (ret == 0) {
+			ret = typec_find_pwr_opmode(opmode_str);
+			if (ret < 0)
+				return ret;
+			port->src_rp = tcpm_pwr_opmode_to_rp(ret);
+		} else {
+			return ret;
+		}
+	}
 
 	if (port->port_type == TYPEC_PORT_SRC)
 		return 0;
@@ -5961,6 +6008,13 @@  static int tcpm_fw_get_caps(struct tcpm_port *port,
 	if (port->typec_caps.prefer_role < 0)
 		return -EINVAL;
 sink:
+	port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
+
+	if (!port->pd_supported) {
+		port->nr_snk_pdo = 0;
+		return 0;
+	}
+
 	/* Get sink pdos */
 	ret = fwnode_property_count_u32(fwnode, "sink-pdos");
 	if (ret <= 0)
@@ -5977,9 +6031,7 @@  static int tcpm_fw_get_caps(struct tcpm_port *port,
 		return -EINVAL;
 	port->operating_snk_mw = mw / 1000;
 
-	port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
-
-	/* FRS can only be supported byb DRP ports */
+	/* FRS can only be supported by DRP ports */
 	if (port->port_type == TYPEC_PORT_DRP) {
 		ret = fwnode_property_read_u32(fwnode, "new-source-frs-typec-current",
 					       &frs_current);