diff mbox series

[v2,08/48] arm64: dts: amlogic: align gpio-key node names with dtschema

Message ID 20220609113911.380368-7-krzysztof.kozlowski@linaro.org
State Accepted
Commit 4fd9afd894ebe5831dbd737e6ca7b6de14da7fda
Headers show
Series [v2,01/48] dt-bindings: input: gpio-keys: enforce node names to match all properties | expand

Commit Message

Krzysztof Kozlowski June 9, 2022, 11:39 a.m. UTC 
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index a5d79f2f7c19..603337ca5608 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -48,7 +48,7 @@  emmc_pwrseq: emmc-pwrseq {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		key1 {
+		key-1 {
 			label = "A";
 			linux,code = <BTN_0>;
 			gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
@@ -56,7 +56,7 @@  key1 {
 			interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
 		};
 
-		key2 {
+		key-2 {
 			label = "B";
 			linux,code = <BTN_1>;
 			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
@@ -64,7 +64,7 @@  key2 {
 			interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
 		};
 
-		key3 {
+		key-3 {
 			label = "C";
 			linux,code = <BTN_2>;
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
@@ -72,7 +72,7 @@  key3 {
 			interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
 		};
 
-		mic_mute {
+		key-mic-mute {
 			label = "MicMute";
 			linux,code = <SW_MUTE_DEVICE>;
 			linux,input-type = <EV_SW>;
@@ -81,7 +81,7 @@  mic_mute {
 			interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
 		};
 
-		power_key {
+		key-power {
 			label = "PowerKey";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;