@@ -19,6 +19,19 @@ muic: extcon@14 {
};
};
+ reg_touch_key: regulator-touch-key {
+ compatible = "regulator-fixed";
+ regulator-name = "touch_key";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_en_default>;
+ };
+
vibrator: vibrator {
compatible = "gpio-vibrator";
enable-gpios = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
@@ -36,6 +49,11 @@ &blsp_i2c2 {
status = "disabled";
};
+&touchkey {
+ vcc-supply = <®_touch_key>;
+ vdd-supply = <®_touch_key>;
+};
+
&msmgpio {
motor_en_default: motor-en-default {
pins = "gpio76";
@@ -44,4 +62,12 @@ motor_en_default: motor-en-default {
drive-strength = <2>;
bias-disable;
};
+
+ tkey_en_default: tkey-en-default {
+ pins = "gpio97";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
};
@@ -37,6 +37,10 @@ keyled {
};
};
+®_touch_key {
+ status = "disabled";
+};
+
&vibrator {
enable-gpios = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
};
On the Samsung Galaxy E5 and E7 the touch key is supplied by a single fixed regulator (enabled via GPIO 97) that supplies both MCU and LED. Add it to the device tree. Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com> --- .../qcom/msm8916-samsung-e2015-common.dtsi | 26 +++++++++++++++++++ .../dts/qcom/msm8916-samsung-grandmax.dts | 4 +++ 2 files changed, 30 insertions(+) -- 2.30.2