diff mbox series

[4/5] arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs

Message ID 20220908081050.29751-4-krzysztof.kozlowski@linaro.org
State New
Headers show
Series [1/5] arm64: dts: qcom: pmi8994: add missing MPP compatible fallback | expand

Commit Message

Krzysztof Kozlowski Sept. 8, 2022, 8:10 a.m. UTC 
Bindings require all PMIC GPIO nodes to have two compatibles - specific
followed by SPMI or SSBI fallback:

  qcom/sa8295p-adp.dtb: pmic@8: gpio@c000:compatible: ['qcom,pm8150-gpio'] is too short

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index ca5f5ad32ce5..98f8420488b6 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -183,7 +183,7 @@  pm8450a: pmic@0 {
 		#size-cells = <0>;
 
 		pm8450a_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio";
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -199,7 +199,7 @@  pm8450c: pmic@4 {
 		#size-cells = <0>;
 
 		pm8450c_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio";
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -215,7 +215,7 @@  pm8450e: pmic@8 {
 		#size-cells = <0>;
 
 		pm8450e_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio";
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -231,7 +231,7 @@  pm8450g: pmic@c {
 		#size-cells = <0>;
 
 		pm8450g_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio";
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;