diff mbox series

[v5,08/14] clk: microchip: mpfs: add MSS pll's set & round rate

Message ID 20220909123123.2699583-9-conor.dooley@microchip.com
State Accepted
Commit 14016e4aafc5f157c10fb1a386fa3b3bd9c30e9a
Headers show
Series PolarFire SoC reset controller & clock cleanups | expand

Commit Message

Conor Dooley Sept. 9, 2022, 12:31 p.m. UTC 
The MSS pll is not a fixed frequency clock, so add set() & round_rate()
support.
Control is limited to a 7 bit output divider as other devices on the
FPGA occupy the other three outputs of the PLL & prevent changing
the multiplier.

Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/clk/microchip/clk-mpfs.c | 54 ++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
diff mbox series

Patch

diff --git a/drivers/clk/microchip/clk-mpfs.c b/drivers/clk/microchip/clk-mpfs.c
index 610c81ecc526..f40d22293539 100644
--- a/drivers/clk/microchip/clk-mpfs.c
+++ b/drivers/clk/microchip/clk-mpfs.c
@@ -129,8 +129,62 @@  static unsigned long mpfs_clk_msspll_recalc_rate(struct clk_hw *hw, unsigned lon
 	return prate * mult / (ref_div * MSSPLL_FIXED_DIV * postdiv);
 }
 
+static long mpfs_clk_msspll_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate)
+{
+	struct mpfs_msspll_hw_clock *msspll_hw = to_mpfs_msspll_clk(hw);
+	void __iomem *mult_addr = msspll_hw->base + msspll_hw->reg_offset;
+	void __iomem *ref_div_addr = msspll_hw->base + REG_MSSPLL_REF_CR;
+	u32 mult, ref_div;
+	unsigned long rate_before_ctrl;
+
+	mult = readl_relaxed(mult_addr) >> MSSPLL_FBDIV_SHIFT;
+	mult &= clk_div_mask(MSSPLL_FBDIV_WIDTH);
+	ref_div = readl_relaxed(ref_div_addr) >> MSSPLL_REFDIV_SHIFT;
+	ref_div &= clk_div_mask(MSSPLL_REFDIV_WIDTH);
+
+	rate_before_ctrl = rate * (ref_div * MSSPLL_FIXED_DIV) / mult;
+
+	return divider_round_rate(hw, rate_before_ctrl, prate, NULL, MSSPLL_POSTDIV_WIDTH,
+				  msspll_hw->flags);
+}
+
+static int mpfs_clk_msspll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long prate)
+{
+	struct mpfs_msspll_hw_clock *msspll_hw = to_mpfs_msspll_clk(hw);
+	void __iomem *mult_addr = msspll_hw->base + msspll_hw->reg_offset;
+	void __iomem *ref_div_addr = msspll_hw->base + REG_MSSPLL_REF_CR;
+	void __iomem *postdiv_addr = msspll_hw->base + REG_MSSPLL_POSTDIV_CR;
+	u32 mult, ref_div, postdiv;
+	int divider_setting;
+	unsigned long rate_before_ctrl, flags;
+
+	mult = readl_relaxed(mult_addr) >> MSSPLL_FBDIV_SHIFT;
+	mult &= clk_div_mask(MSSPLL_FBDIV_WIDTH);
+	ref_div = readl_relaxed(ref_div_addr) >> MSSPLL_REFDIV_SHIFT;
+	ref_div &= clk_div_mask(MSSPLL_REFDIV_WIDTH);
+
+	rate_before_ctrl = rate * (ref_div * MSSPLL_FIXED_DIV) / mult;
+	divider_setting = divider_get_val(rate_before_ctrl, prate, NULL, MSSPLL_POSTDIV_WIDTH,
+					  msspll_hw->flags);
+
+	if (divider_setting < 0)
+		return divider_setting;
+
+	spin_lock_irqsave(&mpfs_clk_lock, flags);
+
+	postdiv = readl_relaxed(postdiv_addr);
+	postdiv &= ~(clk_div_mask(MSSPLL_POSTDIV_WIDTH) << MSSPLL_POSTDIV_SHIFT);
+	writel_relaxed(postdiv, postdiv_addr);
+
+	spin_unlock_irqrestore(&mpfs_clk_lock, flags);
+
+	return 0;
+}
+
 static const struct clk_ops mpfs_clk_msspll_ops = {
 	.recalc_rate = mpfs_clk_msspll_recalc_rate,
+	.round_rate = mpfs_clk_msspll_round_rate,
+	.set_rate = mpfs_clk_msspll_set_rate,
 };
 
 #define CLK_PLL(_id, _name, _parent, _shift, _width, _flags, _offset) {			\