From patchwork Sat Sep 10 14:32:11 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Iskren Chernev X-Patchwork-Id: 604634 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B8AE1C6FA86 for ; Sat, 10 Sep 2022 14:33:01 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229806AbiIJOdA (ORCPT ); Sat, 10 Sep 2022 10:33:00 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33732 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229546AbiIJOcj (ORCPT ); Sat, 10 Sep 2022 10:32:39 -0400 Received: from mail-wr1-x42a.google.com (mail-wr1-x42a.google.com [IPv6:2a00:1450:4864:20::42a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1779D4CA2E; Sat, 10 Sep 2022 07:32:31 -0700 (PDT) Received: by mail-wr1-x42a.google.com with SMTP id c11so7822179wrp.11; Sat, 10 Sep 2022 07:32:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date; bh=ciTSseM0ZVhIoNLpfdtSKBndt9cSVhiI4lsKMZmSUUc=; b=BZLowzB0M3PJgeBqR88atC9wD/i7PSeZsbO3g+88wVfE4w3fn/rI9qMDK7iW9Msl73 nGUCyFDf8Cics/15bxx7zV5hd3hoHTcy0WYmOJbBzNbYqJcQvm7V2X2NYwKPR7rnFsWf 3qvG4c7Mul7AiXPoXvhuTrZestTEcwVstdGEicyH6/Nj4xh72Muj8uxiqjWPcuatJuG6 8tyADtyBWzO+YXFfp7qXr0rfT97MaIutnjqqBW/wVDb2q2WbgSZERJnWhIEFEIUJDbzG moGxiQA1S6SBjUz5TEim4d+p7cCPoprC44wFpddpm2q1Ykf7AmhzaVKfFA4uTVM6HdEq nvqA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date; bh=ciTSseM0ZVhIoNLpfdtSKBndt9cSVhiI4lsKMZmSUUc=; b=AfaGxol8tLxc7iYKeluUKLd3GjALwzGq1jbcx9+R0JfQI5DsYF3UFXYkizDKpKoMvG vQKxEtd0wV5Ld1LZatteA0Cn2jiA/v25zQHKDPm7TGLIZb3yNQNlub9Juw+OtVDndx4N Ypa3tPk7pzDRhV2gcomjFE2j7J84Xftd59rmGQ1b1tf9OpavWKwz4bQ9KXBq6IXMgqyM SiNmVcT7GEXwWSk0m/fbE3jSgscHOgUXEGChwzuqaOGXBSliBK0c2gKJLLTcReqqS65u OkIWGDgoJShAHhieZ8u1ErknZNdVwNNAyymIWCqiFuXmsnr5qbZzkBgFnDsJOig9i6VZ pdpg== X-Gm-Message-State: ACgBeo18JcDBzECJ+cOdZ+1ibm8M3fb7K9d6IwWsCy02gpXgBoI/e9xN EVZ0/Yn6dZq9nGlu0nIw6zQ= X-Google-Smtp-Source: AA6agR78tG/sLvNyUDfJFZwa5O1JC8qaoXGnLB0iI8sQnJNGaL61DR3UtpjnR3isAGWgArOURDfuVg== X-Received: by 2002:a5d:5c0a:0:b0:228:db53:22cc with SMTP id cc10-20020a5d5c0a000000b00228db5322ccmr10041594wrb.126.1662820351386; Sat, 10 Sep 2022 07:32:31 -0700 (PDT) Received: from localhost ([77.78.20.135]) by smtp.gmail.com with ESMTPSA id n2-20020a5d4c42000000b002250c35826dsm2926917wrt.104.2022.09.10.07.32.30 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Sat, 10 Sep 2022 07:32:30 -0700 (PDT) From: Iskren Chernev To: Krzysztof Kozlowski , Bjorn Andersson , Rob Herring Cc: phone-devel@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, Iskren Chernev , Andy Gross , Konrad Dybcio , Krzysztof Kozlowski , linux-kernel@vger.kernel.org Subject: [PATCH v3 7/9] arm64: dts: qcom: sm6115: Add basic soc dtsi Date: Sat, 10 Sep 2022 17:32:11 +0300 Message-Id: <20220910143213.477261-8-iskren.chernev@gmail.com> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20220910143213.477261-1-iskren.chernev@gmail.com> References: <20220910143213.477261-1-iskren.chernev@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add support for Qualcomm SM6115 SoC. This includes: - GCC - Pinctrl - RPM (CC+PD) - USB - MMC - UFS Signed-off-by: Iskren Chernev --- pending issues with dtschema: - for some reason, using pinctrl phandles (in mmc) breaks the pinctrl schema (4 times) .output/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dtb: pinctrl@500000: sdc1-on-state: 'oneOf' conditional failed, one must be fixed: 'pins' is a required property 'clk', 'cmd', 'data', 'rclk' do not match any of the regexes: 'pinctrl-[0-9]+' [[26]] is not of type 'object' From schema: /home/iskren/src/pmos/linux-postmarketos/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml - the ufs phy is actually a phy inside a phy, so the outher one requires #phy-cells (according to dtschema python package). Maybe rename the outer to phys@ because it's not used as a phy, only a holder of phys. arch/arm64/boot/dts/qcom/sm6115.dtsi | 857 +++++++++++++++++++++++++++ 1 file changed, 857 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi new file mode 100644 index 000000000000..8a9f98230d46 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -0,0 +1,857 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, Iskren Chernev + */ + +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x1>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x2>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x3>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x101>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x102>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x103>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6115", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: memory@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: memory@46000000 { + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + }; + + cdsp_sec_mem: memory@46200000 { + reg = <0x0 0x46200000 0x0 0x1e00000>; + no-map; + }; + + pil_modem_mem: memory@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: memory@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: memory@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_cdsp_mem: memory@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1e00000>; + no-map; + }; + + pil_adsp_mem: memory@53800000 { + reg = <0x0 0x53800000 0x0 0x2800000>; + no-map; + }; + + pil_ipa_fw_mem: memory@56100000 { + reg = <0x0 0x56100000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@56110000 { + reg = <0x0 0x56110000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: memory@56115000 { + reg = <0x0 0x56115000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: memory@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: memory@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: memory@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = ; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sm6115"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,sm6115-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = ; + }; + + rpmpd_opp_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = ; + }; + + rpmpd_opp_nom: opp5 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = ; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = ; + }; + }; + }; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + tlmm: pinctrl@500000 { + compatible = "qcom,sm6115-tlmm"; + reg = <0x500000 0x400000>, <0x900000 0x400000>, <0xd00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 121>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + sdc1_state_on: sdc1-on-state { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + pins = "gpio88"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd { + pins = "gpio88"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-sm6115"; + reg = <0x1400000 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + hsusb_phy: phy@1613000 { + compatible = "qcom,sm6115-qusb2-phy"; + reg = <0x1613000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + + status = "disabled"; + }; + + qfprom@1b40000 { + compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; + reg = <0x1b40000 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x1c40000 0x1100>, + <0x1e00000 0x2000000>, + <0x3e00000 0x100000>, + <0x3f00000 0xa0000>, + <0x1c0a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x340000 0x20000>; + #hwlock-cells = <1>; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x45f0000 0x7000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x4744000 0x1000>, <0x4745000 0x1000>, <0x4748000 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", "core", "xo", "ice"; + + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + + bus-width = <8>; + status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x04784000 0x1000>; + reg-names = "hc"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; + clock-names = "iface", "core", "xo"; + + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + pinctrl-names = "default", "sleep"; + + power-domains = <&rpmpd SM6115_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0x00a0 0x0>; + resets = <&gcc GCC_SDCC2_BCR>; + + bus-width = <4>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + ufs_mem_hc: ufs@4804000 { + compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x4804000 0x3000>, <0x4810000 0x8000>; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <1>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + iommus = <&apps_smmu 0x100 0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "ice_core_clk"; + + freq-table-hz = <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@4807000 { + compatible = "qcom,sm6115-qmp-ufs-phy"; + reg = <0x4807000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@4807400 { + reg = <0x4807400 0x098>, + <0x4807600 0x130>, + <0x4807c00 0x16c>; + #phy-cells = <0>; + }; + }; + + usb3: usb@4ef8800 { + compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; + reg = <0x04ef8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <66666667>; + + interrupts = , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + qcom,select-utmi-as-pipe-clk; + status = "disabled"; + + usb3_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x04e00000 0xcd00>; + interrupts = ; + phys = <&hsusb_phy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,sm6115-smmu-500", "arm,mmu-500"; + reg = <0xc600000 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,sm6115-apcs-hmss-global"; + reg = <0xf111000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0xf120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <19200000>; + + frame@f121000 { + reg = <0xf121000 0x1000>, <0xf122000 0x1000>; + frame-number = <0>; + interrupts = , + ; + }; + + frame@f123000 { + reg = <0xf123000 0x1000>; + frame-number = <1>; + interrupts = ; + status = "disabled"; + }; + + frame@f124000 { + reg = <0xf124000 0x1000>; + frame-number = <2>; + interrupts = ; + status = "disabled"; + }; + + frame@f125000 { + reg = <0xf125000 0x1000>; + frame-number = <3>; + interrupts = ; + status = "disabled"; + }; + + frame@f126000 { + reg = <0xf126000 0x1000>; + frame-number = <4>; + interrupts = ; + status = "disabled"; + }; + + frame@f127000 { + reg = <0xf127000 0x1000>; + frame-number = <5>; + interrupts = ; + status = "disabled"; + }; + + frame@f128000 { + frame-number = <6>; + interrupts = ; + reg = <0xf128000 0x1000>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0xf200000 0x10000>, <0xf300000 0x100000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = ; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +};