diff mbox series

[net-next,3/3] dt-bindings: net: dsa: remove label = "cpu" from examples

Message ID 20220912175058.280386-4-vladimir.oltean@nxp.com
State Accepted
Commit 9cc115d8d6f73dd260de1609182f3645844d6907
Headers show
Series Remove label = "cpu" from DSA dt-bindings | expand

Commit Message

Vladimir Oltean Sept. 12, 2022, 5:50 p.m. UTC
This is not used by the DSA dt-binding, so remove it from all examples.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 Documentation/devicetree/bindings/net/dsa/ar9331.txt       | 1 -
 .../devicetree/bindings/net/dsa/arrow,xrs700x.yaml         | 1 -
 Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml    | 2 --
 .../devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml  | 1 -
 Documentation/devicetree/bindings/net/dsa/lan9303.txt      | 2 --
 Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt | 1 -
 .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml       | 7 -------
 .../devicetree/bindings/net/dsa/microchip,ksz.yaml         | 2 --
 Documentation/devicetree/bindings/net/dsa/qca8k.yaml       | 3 ---
 Documentation/devicetree/bindings/net/dsa/realtek.yaml     | 2 --
 .../devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml    | 1 -
 .../devicetree/bindings/net/dsa/vitesse,vsc73xx.txt        | 2 --
 12 files changed, 25 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
index 320607cbbb17..f824fdae0da2 100644
--- a/Documentation/devicetree/bindings/net/dsa/ar9331.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
@@ -76,7 +76,6 @@  eth1: ethernet@1a000000 {
 
 				switch_port0: port@0 {
 					reg = <0x0>;
-					label = "cpu";
 					ethernet = <&eth1>;
 
 					phy-mode = "gmii";
diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
index eb01a8f37ce4..259a0c6547f3 100644
--- a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
@@ -61,7 +61,6 @@  examples:
                 };
                 ethernet-port@3 {
                     reg = <3>;
-                    label = "cpu";
                     ethernet = <&fec1>;
                     phy-mode = "rgmii-id";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
index 2e01371b8288..1219b830b1a4 100644
--- a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
@@ -169,7 +169,6 @@  examples:
 
                 port@8 {
                     reg = <8>;
-                    label = "cpu";
                     phy-mode = "rgmii-txid";
                     ethernet = <&eth0>;
                     fixed-link {
@@ -252,7 +251,6 @@  examples:
 
                 port@8 {
                     ethernet = <&amac2>;
-                    label = "cpu";
                     reg = <8>;
                     phy-mode = "internal";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
index 1ff44dd68a61..73b774eadd0b 100644
--- a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
@@ -91,7 +91,6 @@  examples:
 
                 port@0 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac0>;
                     phy-mode = "mii";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 464d6bf87605..46a732087f5c 100644
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -46,7 +46,6 @@  I2C managed mode:
 
 			port@0 { /* RMII fixed link to master */
 				reg = <0>;
-				label = "cpu";
 				ethernet = <&master>;
 			};
 
@@ -83,7 +82,6 @@  MDIO managed mode:
 
 					port@0 {
 						reg = <0>;
-						label = "cpu";
 						ethernet = <&master>;
 					};
 
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
index e3829d3e480e..8bb1eff21cb1 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
@@ -96,7 +96,6 @@  switch@e108000 {
 
 		port@6 {
 			reg = <0x6>;
-			label = "cpu";
 			ethernet = <&eth0>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 84bb36cab518..bc6446e1f55a 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -325,7 +325,6 @@  examples:
 
                 port@6 {
                     reg = <6>;
-                    label = "cpu";
                     ethernet = <&gmac0>;
                     phy-mode = "rgmii";
 
@@ -389,7 +388,6 @@  examples:
 
                 port@6 {
                     reg = <6>;
-                    label = "cpu";
                     ethernet = <&gmac0>;
                     phy-mode = "trgmii";
 
@@ -454,7 +452,6 @@  examples:
 
                 port@6 {
                     reg = <6>;
-                    label = "cpu";
                     ethernet = <&gmac0>;
                     phy-mode = "2500base-x";
 
@@ -521,7 +518,6 @@  examples:
 
                 port@6 {
                     reg = <6>;
-                    label = "cpu";
                     ethernet = <&gmac0>;
                     phy-mode = "trgmii";
 
@@ -610,7 +606,6 @@  examples:
 
                     port@6 {
                         reg = <6>;
-                        label = "cpu";
                         ethernet = <&gmac0>;
                         phy-mode = "trgmii";
 
@@ -699,7 +694,6 @@  examples:
 
                     port@6 {
                         reg = <6>;
-                        label = "cpu";
                         ethernet = <&gmac0>;
                         phy-mode = "trgmii";
 
@@ -787,7 +781,6 @@  examples:
 
                     port@6 {
                         reg = <6>;
-                        label = "cpu";
                         ethernet = <&gmac0>;
                         phy-mode = "trgmii";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 456802affc9d..4da75b1f9533 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -107,7 +107,6 @@  examples:
                 };
                 port@5 {
                     reg = <5>;
-                    label = "cpu";
                     ethernet = <&eth0>;
                     phy-mode = "rgmii";
 
@@ -146,7 +145,6 @@  examples:
                 };
                 port@6 {
                     reg = <6>;
-                    label = "cpu";
                     ethernet = <&eth0>;
                     phy-mode = "rgmii";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index f3c88371d76c..978162df51f7 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -159,7 +159,6 @@  examples:
 
                 port@0 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac1>;
                     phy-mode = "rgmii";
 
@@ -221,7 +220,6 @@  examples:
 
                 port@0 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac1>;
                     phy-mode = "rgmii";
 
@@ -268,7 +266,6 @@  examples:
 
                 port@6 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac1>;
                     phy-mode = "sgmii";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
index 4f99aff029dc..1a7d45a8ad66 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -189,7 +189,6 @@  examples:
                             };
                             port@5 {
                                     reg = <5>;
-                                    label = "cpu";
                                     ethernet = <&gmac0>;
                                     phy-mode = "rgmii";
                                     fixed-link {
@@ -277,7 +276,6 @@  examples:
                             };
                             port@6 {
                                     reg = <6>;
-                                    label = "cpu";
                                     ethernet = <&fec1>;
                                     phy-mode = "rgmii";
                                     tx-internal-delay-ps = <2000>;
diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
index 14a1f0b4c32b..7ca9c19a157c 100644
--- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -130,7 +130,6 @@  examples:
             port@4 {
                 reg = <4>;
                 ethernet = <&gmac2>;
-                label = "cpu";
                 phy-mode = "internal";
 
                 fixed-link {
diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
index bbf4a13f6d75..258bef483673 100644
--- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
+++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
@@ -75,7 +75,6 @@  switch@0 {
 		};
 		vsc: port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac1>;
 			phy-mode = "rgmii";
 			fixed-link {
@@ -117,7 +116,6 @@  switch@2,0 {
 		};
 		vsc: port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&enet0>;
 			phy-mode = "rgmii";
 			fixed-link {