diff mbox series

[19/19] arm64: dts: qcom: qdru1000: Add additional UART instances

Message ID 20221001030656.29365-20-quic_molvera@quicinc.com
State New
Headers show
Series None | expand

Commit Message

Melody Olvera Oct. 1, 2022, 3:06 a.m. UTC
Add remaining UART instances to the QUP nodes for the QDU1000
and QRU1000 SoCs.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qdru1000.dtsi | 57 +++++++++++++++++++++++++-
 1 file changed, 56 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qdru1000.dtsi b/arch/arm64/boot/dts/qcom/qdru1000.dtsi
index 930bb8c8ba5b..21938e3a613e 100644
--- a/arch/arm64/boot/dts/qcom/qdru1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdru1000.dtsi
@@ -290,6 +290,19 @@  qupv3_id_0: geniqup@9c0000 {
 			ranges;
 			status = "disabled";
 
+			uart0: serial@980000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			uart7: serial@99c000 {
 				compatible = "qcom,geni-debug-uart";
 				reg = <0x0 0x99c000 0x0 0x4000>;
@@ -569,6 +582,33 @@  qupv3_id_1: geniqup@ac0000 {
 			ranges;
 			status = "disabled";
 
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart13: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+
 			i2c9: i2c@a84000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0xa84000 0x0 0x4000>;
@@ -912,7 +952,12 @@  tlmm: pinctrl@f000000 {
 			gpio-ranges = <&tlmm 0 0 151>;
 			wakeup-parent = <&pdc>;
 
-			qup_uart7_default: qup-uart7-default {
+			qup_uart0_default: qup-uart0-default {
+				pins = "gpio6", "gpio7", "gpio8", "gpio9";
+				function = "qup0_se0_l0";
+			};
+
+			qup_uart7_default: qup-uart3-default {
 				tx {
 					pins = "gpio134";
 					function = "qup0_se7_l2";
@@ -928,6 +973,16 @@  rx {
 				};
 			};
 
+			qup_uart8_default: qup-uart8-default {
+				pins = "gpio18", "gpio19", "gpio20", "gpio21";
+				function = "qup1_se0_l0";
+			};
+
+			qup_uart13_default: qup-uart13-default {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "qup1_se5_l0";
+			};
+
 			qup_i2c1_data_clk: qup-i2c1-data-clk {
 				pins = "gpio10", "gpio11";
 				function = "qup0_se1_l0";