diff mbox series

[2/3] arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers

Message ID 20221025144117.1010488-3-ioana.ciornei@nxp.com
State Accepted
Commit d78a57426e64fc4c61e6189e450a0432d24536ca
Headers show
Series arch: dts: specify the MDC frequency on Layerscape DPAA2 devices | expand

Commit Message

Ioana Ciornei Oct. 25, 2022, 2:41 p.m. UTC 
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.

Fixes: bbe75af7b092 ("arm64: dts: ls1088a: add external MDIO device nodes")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 421d879013d7..260d045dbd9a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -779,6 +779,9 @@  emdio1: mdio@8b96000 {
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
@@ -788,6 +791,9 @@  emdio2: mdio@8b97000 {
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};