| Message ID | 20221029051449.30678-4-manivannan.sadhasivam@linaro.org |
|---|---|
| State | Accepted |
| Commit | 448a7821daa1bb12ec0978694cd0e77be3d9663b |
| Headers | show |
| Series | sc8280xp-pmic updates and X13s thermal zone support | expand |
On 29.10.2022 07:14, Manivannan Sadhasivam wrote: > Add thermal zones for the PM8280_{1/2} PMICs by using the temperature > alarm blocks as the thermal sensors. Temperature trip points are > inherited from PM8350 PMIC. > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Konrad > arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 44 ++++++++++++++++++++ > 1 file changed, 44 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi > index 5de47b1434a4..397ff4995003 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi > @@ -7,6 +7,50 @@ > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/spmi/spmi.h> > > +/ { > + thermal-zones { > + pm8280_1_thermal: pm8280-1-thermal { > + polling-delay-passive = <100>; > + polling-delay = <0>; > + thermal-sensors = <&pm8280_1_temp_alarm>; > + > + trips { > + trip0 { > + temperature = <95000>; > + hysteresis = <0>; > + type = "passive"; > + }; > + > + trip1 { > + temperature = <115000>; > + hysteresis = <0>; > + type = "critical"; > + }; > + }; > + }; > + > + pm8280_2_thermal: pm8280-2-thermal { > + polling-delay-passive = <100>; > + polling-delay = <0>; > + thermal-sensors = <&pm8280_2_temp_alarm>; > + > + trips { > + trip0 { > + temperature = <95000>; > + hysteresis = <0>; > + type = "passive"; > + }; > + > + trip1 { > + temperature = <115000>; > + hysteresis = <0>; > + type = "critical"; > + }; > + }; > + }; > + }; > +}; > + > &spmi_bus { > pmk8280: pmic@0 { > compatible = "qcom,pmk8350", "qcom,spmi-pmic";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index 5de47b1434a4..397ff4995003 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -7,6 +7,50 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm8280_1_thermal: pm8280-1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8280_1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pm8280_2_thermal: pm8280-2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8280_2_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmk8280: pmic@0 { compatible = "qcom,pmk8350", "qcom,spmi-pmic";
Add thermal zones for the PM8280_{1/2} PMICs by using the temperature alarm blocks as the thermal sensors. Temperature trip points are inherited from PM8350 PMIC. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 44 ++++++++++++++++++++ 1 file changed, 44 insertions(+)