diff mbox series

[v11,2/2] mfd: max597x: Add support for MAX5970 and MAX5978

Message ID 20221116205822.1128275-3-Naresh.Solanki@9elements.com
State New
Headers show
Series [v11,1/2] dt-bindings: mfd: Add MAX5970 and MAX5978 | expand

Commit Message

Naresh Solanki Nov. 16, 2022, 8:58 p.m. UTC 
From: Patrick Rudolph <patrick.rudolph@9elements.com>

Implement a regulator driver with IRQ support for fault management.
Written against documentation [1] and [2] and tested on real hardware.

Every channel has its own regulator supplies nammed 'vss1-supply' and
'vss2-supply'. The regulator supply is used to determine the output
voltage, as the smart switch provides no output regulation.
The driver requires the 'shunt-resistor-micro-ohms' property to be
present in Device Tree to properly calculate current related
values.

Datasheet links:
1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Co-developed-by: Marcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Co-developed-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
---
 drivers/mfd/Kconfig         |  12 +++++
 drivers/mfd/Makefile        |   1 +
 drivers/mfd/max597x.c       |  93 +++++++++++++++++++++++++++++++++
 include/linux/mfd/max597x.h | 101 ++++++++++++++++++++++++++++++++++++
 4 files changed, 207 insertions(+)
 create mode 100644 drivers/mfd/max597x.c
 create mode 100644 include/linux/mfd/max597x.h

Comments

Lee Jones Nov. 17, 2022, 10:15 a.m. UTC | #1 
On Wed, 16 Nov 2022, Naresh Solanki wrote:

> From: Patrick Rudolph <patrick.rudolph@9elements.com>
> 
> Implement a regulator driver with IRQ support for fault management.
> Written against documentation [1] and [2] and tested on real hardware.
> 
> Every channel has its own regulator supplies nammed 'vss1-supply' and
> 'vss2-supply'. The regulator supply is used to determine the output
> voltage, as the smart switch provides no output regulation.
> The driver requires the 'shunt-resistor-micro-ohms' property to be
> present in Device Tree to properly calculate current related
> values.
> 
> Datasheet links:
> 1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
> 2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Co-developed-by: Marcello Sylvester Bauer <sylv@sylv.io>
> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> Co-developed-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> ---
>  drivers/mfd/Kconfig         |  12 +++++
>  drivers/mfd/Makefile        |   1 +
>  drivers/mfd/max597x.c       |  93 +++++++++++++++++++++++++++++++++
>  include/linux/mfd/max597x.h | 101 ++++++++++++++++++++++++++++++++++++
>  4 files changed, 207 insertions(+)
>  create mode 100644 drivers/mfd/max597x.c
>  create mode 100644 include/linux/mfd/max597x.h

Ignoring my comments won't make them go away. :)

Please tell me why you need a whole new driver, instead of adding
support to simple-mfd-i2c?

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 8b93856de432..416fe7986b7b 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -253,6 +253,18 @@ config MFD_MADERA_SPI
>  	  Support for the Cirrus Logic Madera platform audio SoC
>  	  core functionality controlled via SPI.
>  
> +config MFD_MAX597X
> +	tristate "Maxim 597x Power Switch and Monitor"
> +	depends on I2C
> +	depends on OF
> +	select MFD_CORE
> +	select REGMAP_I2C
> +	help
> +	  This driver controls a Maxim 5970/5978 switch via I2C bus.
> +	  The MAX5970/5978 is a smart switch with no output regulation, but
> +	  fault protection and voltage and current monitoring capabilities.
> +	  Also it supports upto 4 indication LEDs.
> +
>  config MFD_CS47L15
>  	bool "Cirrus Logic CS47L15"
>  	select PINCTRL_CS47L15
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 7ed3ef4a698c..819d711fa748 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -161,6 +161,7 @@ obj-$(CONFIG_MFD_DA9063)	+= da9063.o
>  obj-$(CONFIG_MFD_DA9150)	+= da9150-core.o
>  
>  obj-$(CONFIG_MFD_MAX14577)	+= max14577.o
> +obj-$(CONFIG_MFD_MAX597X)	+= max597x.o
>  obj-$(CONFIG_MFD_MAX77620)	+= max77620.o
>  obj-$(CONFIG_MFD_MAX77650)	+= max77650.o
>  obj-$(CONFIG_MFD_MAX77686)	+= max77686.o
> diff --git a/drivers/mfd/max597x.c b/drivers/mfd/max597x.c
> new file mode 100644
> index 000000000000..45838413f24a
> --- /dev/null
> +++ b/drivers/mfd/max597x.c
> @@ -0,0 +1,93 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Maxim MAX5970/MAX5978 Power Switch & Monitor
> + *
> + * Copyright (c) 2022 9elements GmbH
> + *
> + * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/max597x.h>
> +#include <linux/regmap.h>
> +
> +static const struct regmap_config max597x_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = MAX_REGISTERS,
> +};
> +
> +static const struct mfd_cell max597x_cells[] = {
> +	{ .name = "max597x-regulator", },
> +	{ .name = "max597x-iio", },
> +	{ .name = "max597x-led", },
> +};
> +
> +static int max597x_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> +{
> +	struct max597x_data *ddata;
> +	enum max597x_chip_type chip = id->driver_data;
> +
> +	ddata = devm_kzalloc(&i2c->dev, sizeof(*ddata),	GFP_KERNEL);
> +	if (!ddata)
> +		return -ENOMEM;
> +
> +	/*
> +	 * Based on chip type, Initialize the number of switch. This is needed by
> +	 * regulator & iio cells.
> +	 */
> +	switch (chip) {
> +	case MAX597x_TYPE_MAX5970:
> +		ddata->num_switches = MAX5970_NUM_SWITCHES;
> +		break;
> +	case MAX597x_TYPE_MAX5978:
> +		ddata->num_switches = MAX5978_NUM_SWITCHES;
> +		break;
> +	}
> +
> +	ddata->regmap = devm_regmap_init_i2c(i2c, &max597x_regmap_config);
> +	if (IS_ERR(ddata->regmap)) {
> +		dev_err(&i2c->dev, "Failed to initialize regmap");
> +		return PTR_ERR(ddata->regmap);
> +	}
> +
> +	/* IRQ used by regulator cell */
> +	ddata->irq = i2c->irq;
> +	ddata->dev = &i2c->dev;
> +	i2c_set_clientdata(i2c, ddata);
> +
> +	return devm_mfd_add_devices(ddata->dev, PLATFORM_DEVID_AUTO,
> +				    max597x_cells, ARRAY_SIZE(max597x_cells),
> +				    NULL, 0, NULL);
> +}
> +
> +static const struct i2c_device_id max597x_table[] = {
> +	{ .name = "max5970", MAX597x_TYPE_MAX5970 },
> +	{ .name = "max5978", MAX597x_TYPE_MAX5978 },
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, max597x_table);
> +
> +static const struct of_device_id max597x_of_match[] = {
> +	{ .compatible = "maxim,max5970" },
> +	{ .compatible = "maxim,max5978" },
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(of, max597x_of_match);
> +
> +static struct i2c_driver max597x_driver = {
> +	.id_table = max597x_table,
> +	.driver = {
> +		  .name = "max597x",
> +		  .of_match_table = of_match_ptr(max597x_of_match),
> +		  },
> +	.probe = max597x_probe,
> +};
> +module_i2c_driver(max597x_driver);
> +
> +MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
> +MODULE_DESCRIPTION("MAX597X Power Switch and Monitor");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max597x.h
> new file mode 100644
> index 000000000000..706eff9c50a4
> --- /dev/null
> +++ b/include/linux/mfd/max597x.h
> @@ -0,0 +1,101 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Maxim MAX5970/MAX5978 Power Switch & Monitor
> + *
> + * Copyright (c) 2022 9elements GmbH
> + *
> + * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
> + */
> +
> +#ifndef MFD_MAX597X_H
> +#define MFD_MAX597X_H
> +
> +#include <linux/device.h>
> +#include <linux/regmap.h>
> +
> +#define MAX5970_NUM_SWITCHES 2
> +#define MAX5978_NUM_SWITCHES 1
> +#define MAX597X_NUM_LEDS     4
> +
> +enum max597x_chip_type {
> +	MAX597x_TYPE_MAX5978 = 1,
> +	MAX597x_TYPE_MAX5970,
> +};
> +
> +#define MAX5970_REG_CURRENT_L(ch)		(0x01 + (ch) * 4)
> +#define MAX5970_REG_CURRENT_H(ch)		(0x00 + (ch) * 4)
> +#define MAX5970_REG_VOLTAGE_L(ch)		(0x03 + (ch) * 4)
> +#define MAX5970_REG_VOLTAGE_H(ch)		(0x02 + (ch) * 4)
> +#define MAX5970_REG_MON_RANGE			0x18
> +#define  MAX5970_MON_MASK				0x3
> +#define  MAX5970_MON(reg, ch)		(((reg) >> ((ch) * 2)) & MAX5970_MON_MASK)
> +#define  MAX5970_MON_MAX_RANGE_UV		16000000
> +
> +#define MAX5970_REG_CH_UV_WARN_H(ch)	(0x1A + (ch) * 10)
> +#define MAX5970_REG_CH_UV_WARN_L(ch)	(0x1B + (ch) * 10)
> +#define MAX5970_REG_CH_UV_CRIT_H(ch)	(0x1C + (ch) * 10)
> +#define MAX5970_REG_CH_UV_CRIT_L(ch)	(0x1D + (ch) * 10)
> +#define MAX5970_REG_CH_OV_WARN_H(ch)	(0x1E + (ch) * 10)
> +#define MAX5970_REG_CH_OV_WARN_L(ch)	(0x1F + (ch) * 10)
> +#define MAX5970_REG_CH_OV_CRIT_H(ch)	(0x20 + (ch) * 10)
> +#define MAX5970_REG_CH_OV_CRIT_L(ch)	(0x21 + (ch) * 10)
> +
> +#define  MAX5970_VAL2REG_H(x)			(((x) >> 2) & 0xFF)
> +#define  MAX5970_VAL2REG_L(x)			((x) & 0x3)
> +
> +#define MAX5970_REG_DAC_FAST(ch)		(0x2E + (ch))
> +
> +#define MAX5970_FAST2SLOW_RATIO			200
> +
> +#define MAX5970_REG_STATUS0				0x31
> +#define  MAX5970_CB_IFAULTF(ch)			(1 << (ch))
> +#define  MAX5970_CB_IFAULTS(ch)			(1 << ((ch) + 4))
> +
> +#define MAX5970_REG_STATUS1				0x32
> +#define  STATUS1_PROT_MASK				0x3
> +#define  STATUS1_PROT(reg) \
> +	(((reg) >> 6) & STATUS1_PROT_MASK)
> +#define  STATUS1_PROT_SHUTDOWN			0
> +#define  STATUS1_PROT_CLEAR_PG			1
> +#define  STATUS1_PROT_ALERT_ONLY		2
> +
> +#define MAX5970_REG_STATUS2				0x33
> +#define  MAX5970_IRNG_MASK				0x3
> +#define  MAX5970_IRNG(reg, ch)	\
> +						(((reg) >> ((ch) * 2)) & MAX5970_IRNG_MASK)
> +
> +#define MAX5970_REG_STATUS3				0x34
> +#define  MAX5970_STATUS3_ALERT			BIT(4)
> +#define  MAX5970_STATUS3_PG(ch)			BIT(ch)
> +
> +#define MAX5970_REG_FAULT0				0x35
> +#define  UV_STATUS_WARN(ch)				BIT(ch)
> +#define  UV_STATUS_CRIT(ch)				BIT(ch + 4)
> +
> +#define MAX5970_REG_FAULT1				0x36
> +#define  OV_STATUS_WARN(ch)				BIT(ch)
> +#define  OV_STATUS_CRIT(ch)				BIT(ch + 4)
> +
> +#define MAX5970_REG_FAULT2				0x37
> +#define  OC_STATUS_WARN(ch)				BIT(ch)
> +
> +#define MAX5970_REG_CHXEN				0x3b
> +#define  CHXEN(ch)						(3 << (ch * 2))
> +
> +#define MAX5970_REG_LED_FLASH			0x43
> +
> +#define MAX_REGISTERS					0x49
> +#define ADC_MASK						0x3FF
> +
> +struct max597x_data {
> +	struct device *dev;
> +	int irq;
> +	int num_switches;
> +	struct regmap *regmap;
> +	/* Chip specific parameters needed by regulator & iio cells */
> +	u32 irng[MAX5970_NUM_SWITCHES];
> +	u32 mon_rng[MAX5970_NUM_SWITCHES];
> +	u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES];
> +};
> +
> +#endif
Naresh Solanki Nov. 18, 2022, 8:50 a.m. UTC | #2 
On 17-11-2022 03:45 pm, Lee Jones wrote:
> On Wed, 16 Nov 2022, Naresh Solanki wrote:
> 
>> From: Patrick Rudolph <patrick.rudolph@9elements.com>
>>
>> Implement a regulator driver with IRQ support for fault management.
>> Written against documentation [1] and [2] and tested on real hardware.
>>
>> Every channel has its own regulator supplies nammed 'vss1-supply' and
>> 'vss2-supply'. The regulator supply is used to determine the output
>> voltage, as the smart switch provides no output regulation.
>> The driver requires the 'shunt-resistor-micro-ohms' property to be
>> present in Device Tree to properly calculate current related
>> values.
>>
>> Datasheet links:
>> 1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
>> 2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
>>
>> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
>> Co-developed-by: Marcello Sylvester Bauer <sylv@sylv.io>
>> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
>> Co-developed-by: Naresh Solanki <Naresh.Solanki@9elements.com>
>> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
>> ---
>>   drivers/mfd/Kconfig         |  12 +++++
>>   drivers/mfd/Makefile        |   1 +
>>   drivers/mfd/max597x.c       |  93 +++++++++++++++++++++++++++++++++
>>   include/linux/mfd/max597x.h | 101 ++++++++++++++++++++++++++++++++++++
>>   4 files changed, 207 insertions(+)
>>   create mode 100644 drivers/mfd/max597x.c
>>   create mode 100644 include/linux/mfd/max597x.h
> 
> Ignoring my comments won't make them go away. :)
> 
> Please tell me why you need a whole new driver, instead of adding
> support to simple-mfd-i2c?
> 
I felt current implementation to be simpler, clearer & straight forward.

>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 8b93856de432..416fe7986b7b 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -253,6 +253,18 @@ config MFD_MADERA_SPI
>>   	  Support for the Cirrus Logic Madera platform audio SoC
>>   	  core functionality controlled via SPI.
>>   
>> +config MFD_MAX597X
>> +	tristate "Maxim 597x Power Switch and Monitor"
>> +	depends on I2C
>> +	depends on OF
>> +	select MFD_CORE
>> +	select REGMAP_I2C
>> +	help
>> +	  This driver controls a Maxim 5970/5978 switch via I2C bus.
>> +	  The MAX5970/5978 is a smart switch with no output regulation, but
>> +	  fault protection and voltage and current monitoring capabilities.
>> +	  Also it supports upto 4 indication LEDs.
>> +
>>   config MFD_CS47L15
>>   	bool "Cirrus Logic CS47L15"
>>   	select PINCTRL_CS47L15
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 7ed3ef4a698c..819d711fa748 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -161,6 +161,7 @@ obj-$(CONFIG_MFD_DA9063)	+= da9063.o
>>   obj-$(CONFIG_MFD_DA9150)	+= da9150-core.o
>>   
>>   obj-$(CONFIG_MFD_MAX14577)	+= max14577.o
>> +obj-$(CONFIG_MFD_MAX597X)	+= max597x.o
>>   obj-$(CONFIG_MFD_MAX77620)	+= max77620.o
>>   obj-$(CONFIG_MFD_MAX77650)	+= max77650.o
>>   obj-$(CONFIG_MFD_MAX77686)	+= max77686.o
>> diff --git a/drivers/mfd/max597x.c b/drivers/mfd/max597x.c
>> new file mode 100644
>> index 000000000000..45838413f24a
>> --- /dev/null
>> +++ b/drivers/mfd/max597x.c
>> @@ -0,0 +1,93 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Maxim MAX5970/MAX5978 Power Switch & Monitor
>> + *
>> + * Copyright (c) 2022 9elements GmbH
>> + *
>> + * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
>> + */
>> +
>> +#include <linux/i2c.h>
>> +#include <linux/mfd/core.h>
>> +#include <linux/mfd/max597x.h>
>> +#include <linux/regmap.h>
>> +
>> +static const struct regmap_config max597x_regmap_config = {
>> +	.reg_bits = 8,
>> +	.val_bits = 8,
>> +	.max_register = MAX_REGISTERS,
>> +};
>> +
>> +static const struct mfd_cell max597x_cells[] = {
>> +	{ .name = "max597x-regulator", },
>> +	{ .name = "max597x-iio", },
>> +	{ .name = "max597x-led", },
>> +};
>> +
>> +static int max597x_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
>> +{
>> +	struct max597x_data *ddata;
>> +	enum max597x_chip_type chip = id->driver_data;
>> +
>> +	ddata = devm_kzalloc(&i2c->dev, sizeof(*ddata),	GFP_KERNEL);
>> +	if (!ddata)
>> +		return -ENOMEM;
>> +
>> +	/*
>> +	 * Based on chip type, Initialize the number of switch. This is needed by
>> +	 * regulator & iio cells.
>> +	 */
>> +	switch (chip) {
>> +	case MAX597x_TYPE_MAX5970:
>> +		ddata->num_switches = MAX5970_NUM_SWITCHES;
>> +		break;
>> +	case MAX597x_TYPE_MAX5978:
>> +		ddata->num_switches = MAX5978_NUM_SWITCHES;
>> +		break;
>> +	}
>> +
>> +	ddata->regmap = devm_regmap_init_i2c(i2c, &max597x_regmap_config);
>> +	if (IS_ERR(ddata->regmap)) {
>> +		dev_err(&i2c->dev, "Failed to initialize regmap");
>> +		return PTR_ERR(ddata->regmap);
>> +	}
>> +
>> +	/* IRQ used by regulator cell */
>> +	ddata->irq = i2c->irq;
>> +	ddata->dev = &i2c->dev;
>> +	i2c_set_clientdata(i2c, ddata);
>> +
>> +	return devm_mfd_add_devices(ddata->dev, PLATFORM_DEVID_AUTO,
>> +				    max597x_cells, ARRAY_SIZE(max597x_cells),
>> +				    NULL, 0, NULL);
>> +}
>> +
>> +static const struct i2c_device_id max597x_table[] = {
>> +	{ .name = "max5970", MAX597x_TYPE_MAX5970 },
>> +	{ .name = "max5978", MAX597x_TYPE_MAX5978 },
>> +	{}
>> +};
>> +
>> +MODULE_DEVICE_TABLE(i2c, max597x_table);
>> +
>> +static const struct of_device_id max597x_of_match[] = {
>> +	{ .compatible = "maxim,max5970" },
>> +	{ .compatible = "maxim,max5978" },
>> +	{}
>> +};
>> +
>> +MODULE_DEVICE_TABLE(of, max597x_of_match);
>> +
>> +static struct i2c_driver max597x_driver = {
>> +	.id_table = max597x_table,
>> +	.driver = {
>> +		  .name = "max597x",
>> +		  .of_match_table = of_match_ptr(max597x_of_match),
>> +		  },
>> +	.probe = max597x_probe,
>> +};
>> +module_i2c_driver(max597x_driver);
>> +
>> +MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
>> +MODULE_DESCRIPTION("MAX597X Power Switch and Monitor");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max597x.h
>> new file mode 100644
>> index 000000000000..706eff9c50a4
>> --- /dev/null
>> +++ b/include/linux/mfd/max597x.h
>> @@ -0,0 +1,101 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Maxim MAX5970/MAX5978 Power Switch & Monitor
>> + *
>> + * Copyright (c) 2022 9elements GmbH
>> + *
>> + * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
>> + */
>> +
>> +#ifndef MFD_MAX597X_H
>> +#define MFD_MAX597X_H
>> +
>> +#include <linux/device.h>
>> +#include <linux/regmap.h>
>> +
>> +#define MAX5970_NUM_SWITCHES 2
>> +#define MAX5978_NUM_SWITCHES 1
>> +#define MAX597X_NUM_LEDS     4
>> +
>> +enum max597x_chip_type {
>> +	MAX597x_TYPE_MAX5978 = 1,
>> +	MAX597x_TYPE_MAX5970,
>> +};
>> +
>> +#define MAX5970_REG_CURRENT_L(ch)		(0x01 + (ch) * 4)
>> +#define MAX5970_REG_CURRENT_H(ch)		(0x00 + (ch) * 4)
>> +#define MAX5970_REG_VOLTAGE_L(ch)		(0x03 + (ch) * 4)
>> +#define MAX5970_REG_VOLTAGE_H(ch)		(0x02 + (ch) * 4)
>> +#define MAX5970_REG_MON_RANGE			0x18
>> +#define  MAX5970_MON_MASK				0x3
>> +#define  MAX5970_MON(reg, ch)		(((reg) >> ((ch) * 2)) & MAX5970_MON_MASK)
>> +#define  MAX5970_MON_MAX_RANGE_UV		16000000
>> +
>> +#define MAX5970_REG_CH_UV_WARN_H(ch)	(0x1A + (ch) * 10)
>> +#define MAX5970_REG_CH_UV_WARN_L(ch)	(0x1B + (ch) * 10)
>> +#define MAX5970_REG_CH_UV_CRIT_H(ch)	(0x1C + (ch) * 10)
>> +#define MAX5970_REG_CH_UV_CRIT_L(ch)	(0x1D + (ch) * 10)
>> +#define MAX5970_REG_CH_OV_WARN_H(ch)	(0x1E + (ch) * 10)
>> +#define MAX5970_REG_CH_OV_WARN_L(ch)	(0x1F + (ch) * 10)
>> +#define MAX5970_REG_CH_OV_CRIT_H(ch)	(0x20 + (ch) * 10)
>> +#define MAX5970_REG_CH_OV_CRIT_L(ch)	(0x21 + (ch) * 10)
>> +
>> +#define  MAX5970_VAL2REG_H(x)			(((x) >> 2) & 0xFF)
>> +#define  MAX5970_VAL2REG_L(x)			((x) & 0x3)
>> +
>> +#define MAX5970_REG_DAC_FAST(ch)		(0x2E + (ch))
>> +
>> +#define MAX5970_FAST2SLOW_RATIO			200
>> +
>> +#define MAX5970_REG_STATUS0				0x31
>> +#define  MAX5970_CB_IFAULTF(ch)			(1 << (ch))
>> +#define  MAX5970_CB_IFAULTS(ch)			(1 << ((ch) + 4))
>> +
>> +#define MAX5970_REG_STATUS1				0x32
>> +#define  STATUS1_PROT_MASK				0x3
>> +#define  STATUS1_PROT(reg) \
>> +	(((reg) >> 6) & STATUS1_PROT_MASK)
>> +#define  STATUS1_PROT_SHUTDOWN			0
>> +#define  STATUS1_PROT_CLEAR_PG			1
>> +#define  STATUS1_PROT_ALERT_ONLY		2
>> +
>> +#define MAX5970_REG_STATUS2				0x33
>> +#define  MAX5970_IRNG_MASK				0x3
>> +#define  MAX5970_IRNG(reg, ch)	\
>> +						(((reg) >> ((ch) * 2)) & MAX5970_IRNG_MASK)
>> +
>> +#define MAX5970_REG_STATUS3				0x34
>> +#define  MAX5970_STATUS3_ALERT			BIT(4)
>> +#define  MAX5970_STATUS3_PG(ch)			BIT(ch)
>> +
>> +#define MAX5970_REG_FAULT0				0x35
>> +#define  UV_STATUS_WARN(ch)				BIT(ch)
>> +#define  UV_STATUS_CRIT(ch)				BIT(ch + 4)
>> +
>> +#define MAX5970_REG_FAULT1				0x36
>> +#define  OV_STATUS_WARN(ch)				BIT(ch)
>> +#define  OV_STATUS_CRIT(ch)				BIT(ch + 4)
>> +
>> +#define MAX5970_REG_FAULT2				0x37
>> +#define  OC_STATUS_WARN(ch)				BIT(ch)
>> +
>> +#define MAX5970_REG_CHXEN				0x3b
>> +#define  CHXEN(ch)						(3 << (ch * 2))
>> +
>> +#define MAX5970_REG_LED_FLASH			0x43
>> +
>> +#define MAX_REGISTERS					0x49
>> +#define ADC_MASK						0x3FF
>> +
>> +struct max597x_data {
>> +	struct device *dev;
>> +	int irq;
>> +	int num_switches;
>> +	struct regmap *regmap;
>> +	/* Chip specific parameters needed by regulator & iio cells */
>> +	u32 irng[MAX5970_NUM_SWITCHES];
>> +	u32 mon_rng[MAX5970_NUM_SWITCHES];
>> +	u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES];
>> +};
>> +
>> +#endif
>
Lee Jones Dec. 8, 2022, 12:23 p.m. UTC | #3 
On Fri, 18 Nov 2022, Naresh Solanki wrote:

> 
> 
> On 17-11-2022 03:45 pm, Lee Jones wrote:
> > On Wed, 16 Nov 2022, Naresh Solanki wrote:
> > 
> > > From: Patrick Rudolph <patrick.rudolph@9elements.com>
> > > 
> > > Implement a regulator driver with IRQ support for fault management.
> > > Written against documentation [1] and [2] and tested on real hardware.
> > > 
> > > Every channel has its own regulator supplies nammed 'vss1-supply' and
> > > 'vss2-supply'. The regulator supply is used to determine the output
> > > voltage, as the smart switch provides no output regulation.
> > > The driver requires the 'shunt-resistor-micro-ohms' property to be
> > > present in Device Tree to properly calculate current related
> > > values.
> > > 
> > > Datasheet links:
> > > 1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
> > > 2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
> > > 
> > > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> > > Co-developed-by: Marcello Sylvester Bauer <sylv@sylv.io>
> > > Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> > > Co-developed-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> > > Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> > > ---
> > >   drivers/mfd/Kconfig         |  12 +++++
> > >   drivers/mfd/Makefile        |   1 +
> > >   drivers/mfd/max597x.c       |  93 +++++++++++++++++++++++++++++++++
> > >   include/linux/mfd/max597x.h | 101 ++++++++++++++++++++++++++++++++++++
> > >   4 files changed, 207 insertions(+)
> > >   create mode 100644 drivers/mfd/max597x.c
> > >   create mode 100644 include/linux/mfd/max597x.h
> > 
> > Ignoring my comments won't make them go away. :)
> > 
> > Please tell me why you need a whole new driver, instead of adding
> > support to simple-mfd-i2c?
> > 
> I felt current implementation to be simpler, clearer & straight forward.

If you can make it work with simple-mfd-i2c, please do so.

No need to submit an entirely new driver for these simple use-cases.
Lee Jones Dec. 23, 2022, 12:36 p.m. UTC | #4 
On Wed, 14 Dec 2022, Naresh Solanki wrote:

> Hi Lee,
> 
> On 14-12-2022 03:17 pm, Lee Jones wrote:
> > On Wed, 14 Dec 2022, Naresh Solanki wrote:
> > 
> > > Hi Lee
> > > 
> > > On 08-12-2022 05:53 pm, Lee Jones wrote:
> > > > On Fri, 18 Nov 2022, Naresh Solanki wrote:
> > > > 
> > > > > 
> > > > > 
> > > > > On 17-11-2022 03:45 pm, Lee Jones wrote:
> > > > > > On Wed, 16 Nov 2022, Naresh Solanki wrote:
> > > > > > 
> > > > > > > From: Patrick Rudolph <patrick.rudolph@9elements.com>
> > > > > > > 
> > > > > > > Implement a regulator driver with IRQ support for fault management.
> > > > > > > Written against documentation [1] and [2] and tested on real hardware.
> > > > > > > 
> > > > > > > Every channel has its own regulator supplies nammed 'vss1-supply' and
> > > > > > > 'vss2-supply'. The regulator supply is used to determine the output
> > > > > > > voltage, as the smart switch provides no output regulation.
> > > > > > > The driver requires the 'shunt-resistor-micro-ohms' property to be
> > > > > > > present in Device Tree to properly calculate current related
> > > > > > > values.
> > > > > > > 
> > > > > > > Datasheet links:
> > > > > > > 1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
> > > > > > > 2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
> > > > > > > 
> > > > > > > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> > > > > > > Co-developed-by: Marcello Sylvester Bauer <sylv@sylv.io>
> > > > > > > Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> > > > > > > Co-developed-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> > > > > > > Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> > > > > > > ---
> > > > > > >     drivers/mfd/Kconfig         |  12 +++++
> > > > > > >     drivers/mfd/Makefile        |   1 +
> > > > > > >     drivers/mfd/max597x.c       |  93 +++++++++++++++++++++++++++++++++
> > > > > > >     include/linux/mfd/max597x.h | 101 ++++++++++++++++++++++++++++++++++++
> > > > > > >     4 files changed, 207 insertions(+)
> > > > > > >     create mode 100644 drivers/mfd/max597x.c
> > > > > > >     create mode 100644 include/linux/mfd/max597x.h
> > > > > > 
> > > > > > Ignoring my comments won't make them go away. :)
> > > > > > 
> > > > > > Please tell me why you need a whole new driver, instead of adding
> > > > > > support to simple-mfd-i2c?
> > > > > > 
> > > > > I felt current implementation to be simpler, clearer & straight forward.
> > > > 
> > > > If you can make it work with simple-mfd-i2c, please do so.
> > > simple-mfd-i2c doesn't has mechanism to pass device type(max5978 vs
> > > max5970).
> > 
> > `git grep silergy,sy7636a -- drivers/mfd`
> I did check the driver but there is no mechanism to distinguish between chip
> variant i.e., 597x-regulator driver should be able to distinguish between
> max5978 vs max5970 chip type.

How is it doing that presently?

Why can't the Regulator driver read the DT or match on the parent's
compatible for itself?

Providing a 100 line driver just to figure out a single value that is
only going to be used in a single driver is a no-go.  Please find a
better way to solve this.
diff mbox series

Patch

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8b93856de432..416fe7986b7b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -253,6 +253,18 @@  config MFD_MADERA_SPI
 	  Support for the Cirrus Logic Madera platform audio SoC
 	  core functionality controlled via SPI.
 
+config MFD_MAX597X
+	tristate "Maxim 597x Power Switch and Monitor"
+	depends on I2C
+	depends on OF
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  This driver controls a Maxim 5970/5978 switch via I2C bus.
+	  The MAX5970/5978 is a smart switch with no output regulation, but
+	  fault protection and voltage and current monitoring capabilities.
+	  Also it supports upto 4 indication LEDs.
+
 config MFD_CS47L15
 	bool "Cirrus Logic CS47L15"
 	select PINCTRL_CS47L15
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 7ed3ef4a698c..819d711fa748 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -161,6 +161,7 @@  obj-$(CONFIG_MFD_DA9063)	+= da9063.o
 obj-$(CONFIG_MFD_DA9150)	+= da9150-core.o
 
 obj-$(CONFIG_MFD_MAX14577)	+= max14577.o
+obj-$(CONFIG_MFD_MAX597X)	+= max597x.o
 obj-$(CONFIG_MFD_MAX77620)	+= max77620.o
 obj-$(CONFIG_MFD_MAX77650)	+= max77650.o
 obj-$(CONFIG_MFD_MAX77686)	+= max77686.o
diff --git a/drivers/mfd/max597x.c b/drivers/mfd/max597x.c
new file mode 100644
index 000000000000..45838413f24a
--- /dev/null
+++ b/drivers/mfd/max597x.c
@@ -0,0 +1,93 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Maxim MAX5970/MAX5978 Power Switch & Monitor
+ *
+ * Copyright (c) 2022 9elements GmbH
+ *
+ * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max597x.h>
+#include <linux/regmap.h>
+
+static const struct regmap_config max597x_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX_REGISTERS,
+};
+
+static const struct mfd_cell max597x_cells[] = {
+	{ .name = "max597x-regulator", },
+	{ .name = "max597x-iio", },
+	{ .name = "max597x-led", },
+};
+
+static int max597x_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+	struct max597x_data *ddata;
+	enum max597x_chip_type chip = id->driver_data;
+
+	ddata = devm_kzalloc(&i2c->dev, sizeof(*ddata),	GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	/*
+	 * Based on chip type, Initialize the number of switch. This is needed by
+	 * regulator & iio cells.
+	 */
+	switch (chip) {
+	case MAX597x_TYPE_MAX5970:
+		ddata->num_switches = MAX5970_NUM_SWITCHES;
+		break;
+	case MAX597x_TYPE_MAX5978:
+		ddata->num_switches = MAX5978_NUM_SWITCHES;
+		break;
+	}
+
+	ddata->regmap = devm_regmap_init_i2c(i2c, &max597x_regmap_config);
+	if (IS_ERR(ddata->regmap)) {
+		dev_err(&i2c->dev, "Failed to initialize regmap");
+		return PTR_ERR(ddata->regmap);
+	}
+
+	/* IRQ used by regulator cell */
+	ddata->irq = i2c->irq;
+	ddata->dev = &i2c->dev;
+	i2c_set_clientdata(i2c, ddata);
+
+	return devm_mfd_add_devices(ddata->dev, PLATFORM_DEVID_AUTO,
+				    max597x_cells, ARRAY_SIZE(max597x_cells),
+				    NULL, 0, NULL);
+}
+
+static const struct i2c_device_id max597x_table[] = {
+	{ .name = "max5970", MAX597x_TYPE_MAX5970 },
+	{ .name = "max5978", MAX597x_TYPE_MAX5978 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, max597x_table);
+
+static const struct of_device_id max597x_of_match[] = {
+	{ .compatible = "maxim,max5970" },
+	{ .compatible = "maxim,max5978" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, max597x_of_match);
+
+static struct i2c_driver max597x_driver = {
+	.id_table = max597x_table,
+	.driver = {
+		  .name = "max597x",
+		  .of_match_table = of_match_ptr(max597x_of_match),
+		  },
+	.probe = max597x_probe,
+};
+module_i2c_driver(max597x_driver);
+
+MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
+MODULE_DESCRIPTION("MAX597X Power Switch and Monitor");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max597x.h
new file mode 100644
index 000000000000..706eff9c50a4
--- /dev/null
+++ b/include/linux/mfd/max597x.h
@@ -0,0 +1,101 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Maxim MAX5970/MAX5978 Power Switch & Monitor
+ *
+ * Copyright (c) 2022 9elements GmbH
+ *
+ * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
+ */
+
+#ifndef MFD_MAX597X_H
+#define MFD_MAX597X_H
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+#define MAX5970_NUM_SWITCHES 2
+#define MAX5978_NUM_SWITCHES 1
+#define MAX597X_NUM_LEDS     4
+
+enum max597x_chip_type {
+	MAX597x_TYPE_MAX5978 = 1,
+	MAX597x_TYPE_MAX5970,
+};
+
+#define MAX5970_REG_CURRENT_L(ch)		(0x01 + (ch) * 4)
+#define MAX5970_REG_CURRENT_H(ch)		(0x00 + (ch) * 4)
+#define MAX5970_REG_VOLTAGE_L(ch)		(0x03 + (ch) * 4)
+#define MAX5970_REG_VOLTAGE_H(ch)		(0x02 + (ch) * 4)
+#define MAX5970_REG_MON_RANGE			0x18
+#define  MAX5970_MON_MASK				0x3
+#define  MAX5970_MON(reg, ch)		(((reg) >> ((ch) * 2)) & MAX5970_MON_MASK)
+#define  MAX5970_MON_MAX_RANGE_UV		16000000
+
+#define MAX5970_REG_CH_UV_WARN_H(ch)	(0x1A + (ch) * 10)
+#define MAX5970_REG_CH_UV_WARN_L(ch)	(0x1B + (ch) * 10)
+#define MAX5970_REG_CH_UV_CRIT_H(ch)	(0x1C + (ch) * 10)
+#define MAX5970_REG_CH_UV_CRIT_L(ch)	(0x1D + (ch) * 10)
+#define MAX5970_REG_CH_OV_WARN_H(ch)	(0x1E + (ch) * 10)
+#define MAX5970_REG_CH_OV_WARN_L(ch)	(0x1F + (ch) * 10)
+#define MAX5970_REG_CH_OV_CRIT_H(ch)	(0x20 + (ch) * 10)
+#define MAX5970_REG_CH_OV_CRIT_L(ch)	(0x21 + (ch) * 10)
+
+#define  MAX5970_VAL2REG_H(x)			(((x) >> 2) & 0xFF)
+#define  MAX5970_VAL2REG_L(x)			((x) & 0x3)
+
+#define MAX5970_REG_DAC_FAST(ch)		(0x2E + (ch))
+
+#define MAX5970_FAST2SLOW_RATIO			200
+
+#define MAX5970_REG_STATUS0				0x31
+#define  MAX5970_CB_IFAULTF(ch)			(1 << (ch))
+#define  MAX5970_CB_IFAULTS(ch)			(1 << ((ch) + 4))
+
+#define MAX5970_REG_STATUS1				0x32
+#define  STATUS1_PROT_MASK				0x3
+#define  STATUS1_PROT(reg) \
+	(((reg) >> 6) & STATUS1_PROT_MASK)
+#define  STATUS1_PROT_SHUTDOWN			0
+#define  STATUS1_PROT_CLEAR_PG			1
+#define  STATUS1_PROT_ALERT_ONLY		2
+
+#define MAX5970_REG_STATUS2				0x33
+#define  MAX5970_IRNG_MASK				0x3
+#define  MAX5970_IRNG(reg, ch)	\
+						(((reg) >> ((ch) * 2)) & MAX5970_IRNG_MASK)
+
+#define MAX5970_REG_STATUS3				0x34
+#define  MAX5970_STATUS3_ALERT			BIT(4)
+#define  MAX5970_STATUS3_PG(ch)			BIT(ch)
+
+#define MAX5970_REG_FAULT0				0x35
+#define  UV_STATUS_WARN(ch)				BIT(ch)
+#define  UV_STATUS_CRIT(ch)				BIT(ch + 4)
+
+#define MAX5970_REG_FAULT1				0x36
+#define  OV_STATUS_WARN(ch)				BIT(ch)
+#define  OV_STATUS_CRIT(ch)				BIT(ch + 4)
+
+#define MAX5970_REG_FAULT2				0x37
+#define  OC_STATUS_WARN(ch)				BIT(ch)
+
+#define MAX5970_REG_CHXEN				0x3b
+#define  CHXEN(ch)						(3 << (ch * 2))
+
+#define MAX5970_REG_LED_FLASH			0x43
+
+#define MAX_REGISTERS					0x49
+#define ADC_MASK						0x3FF
+
+struct max597x_data {
+	struct device *dev;
+	int irq;
+	int num_switches;
+	struct regmap *regmap;
+	/* Chip specific parameters needed by regulator & iio cells */
+	u32 irng[MAX5970_NUM_SWITCHES];
+	u32 mon_rng[MAX5970_NUM_SWITCHES];
+	u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES];
+};
+
+#endif