| Message ID | 20221207124205.1373202-1-alexander.stein@ew.tq-group.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible | expand |
Hi Shawn, Am Samstag, 31. Dezember 2022, 13:57:58 CET schrieb Shawn Guo: > On Wed, Dec 07, 2022 at 01:41:59PM +0100, Alexander Stein wrote: > > Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip. > > While at it, fix the node name according to device tree spec > > recommendations. The EEPROM is a separate node anyway. > > > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > > Could you combine the series into two patches, one for arm64 and the > other for ARM? I just split and resend the series, but I overlooked that you wanted to squash them actually :( I'll do another round. Best regards, Alexander > Shawn > > > --- > > > > arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 5 ++--- > > arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi | 5 ++--- > > 2 files changed, 4 insertions(+), 6 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts > > b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index > > a3340814099aa..f7f657b007a18 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts > > @@ -516,9 +516,8 @@ tlv320aic3x04: audio-codec@18 { > > > > ldoin-supply = <®_vcc_3v3>; > > > > }; > > > > - /* NXP SE97BTP with temperature sensor + eeprom */ > > - se97_1c: temperature-sensor-eeprom@1c { > > - compatible = "nxp,se97", "jedec,jc-42.4-temp"; > > + se97_1c: temperature-sensor@1c { > > + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; > > > > reg = <0x1c>; > > > > }; > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi > > b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi index > > 7bd680a926ce7..ebc29a950ba9a 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi > > @@ -63,9 +63,8 @@ &i2c1 { > > > > sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > > status = "okay"; > > > > - /* NXP SE97BTP with temperature sensor + eeprom */ > > - se97: temperature-sensor-eeprom@1b { > > - compatible = "nxp,se97", "jedec,jc-42.4-temp"; > > + se97: temperature-sensor@1b { > > + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; > > > > reg = <0x1b>; > > > > };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index a3340814099aa..f7f657b007a18 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -516,9 +516,8 @@ tlv320aic3x04: audio-codec@18 { ldoin-supply = <®_vcc_3v3>; }; - /* NXP SE97BTP with temperature sensor + eeprom */ - se97_1c: temperature-sensor-eeprom@1c { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + se97_1c: temperature-sensor@1c { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1c>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi index 7bd680a926ce7..ebc29a950ba9a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi @@ -63,9 +63,8 @@ &i2c1 { sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - /* NXP SE97BTP with temperature sensor + eeprom */ - se97: temperature-sensor-eeprom@1b { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + se97: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1b>; };
Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip. While at it, fix the node name according to device tree spec recommendations. The EEPROM is a separate node anyway. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 5 ++--- arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi | 5 ++--- 2 files changed, 4 insertions(+), 6 deletions(-)