diff mbox series

[05/22] sound: remove sh-specific sounds/soc/sh drivers

Message ID 20230113062339.1909087-6-hch@lst.de
State New
Headers show
Series None | expand

Commit Message

Christoph Hellwig Jan. 13, 2023, 6:23 a.m. UTC
Now that arch/sh is removed these drivers are dead code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 sound/soc/sh/Kconfig       |  44 --
 sound/soc/sh/Makefile      |  16 -
 sound/soc/sh/dma-sh7760.c  | 334 ----------------
 sound/soc/sh/fsi.c         |   9 -
 sound/soc/sh/hac.c         | 345 ----------------
 sound/soc/sh/migor.c       | 205 ----------
 sound/soc/sh/sh7760-ac97.c |  72 ----
 sound/soc/sh/siu.h         | 180 ---------
 sound/soc/sh/siu_dai.c     | 799 -------------------------------------
 sound/soc/sh/siu_pcm.c     | 553 -------------------------
 sound/soc/sh/ssi.c         | 403 -------------------
 11 files changed, 2960 deletions(-)
 delete mode 100644 sound/soc/sh/dma-sh7760.c
 delete mode 100644 sound/soc/sh/hac.c
 delete mode 100644 sound/soc/sh/migor.c
 delete mode 100644 sound/soc/sh/sh7760-ac97.c
 delete mode 100644 sound/soc/sh/siu.h
 delete mode 100644 sound/soc/sh/siu_dai.c
 delete mode 100644 sound/soc/sh/siu_pcm.c
 delete mode 100644 sound/soc/sh/ssi.c
diff mbox series

Patch

diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 793a0326f32b46..4367927b81df20 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -2,25 +2,10 @@ 
 menu "SoC Audio support for Renesas SoCs"
 	depends on ARCH_RENESAS || COMPILE_TEST
 
-config SND_SOC_PCM_SH7760
-	tristate "SoC Audio support for Renesas SH7760"
-	depends on CPU_SUBTYPE_SH7760 && SH_DMABRG
-	help
-	  Enable this option for SH7760 AC97/I2S audio support.
-
-
 ##
 ## Audio unit modules
 ##
 
-config SND_SOC_SH4_HAC
-	tristate
-	select AC97_BUS
-	select SND_SOC_AC97_BUS
-
-config SND_SOC_SH4_SSI
-	tristate
-
 config SND_SOC_SH4_FSI
 	tristate "SH4 FSI support"
 	depends on COMMON_CLK
@@ -28,14 +13,6 @@  config SND_SOC_SH4_FSI
 	help
 	  This option enables FSI sound support
 
-config SND_SOC_SH4_SIU
-	tristate
-	depends on ARCH_SHMOBILE && HAVE_CLK
-	depends on DMADEVICES
-	select DMA_ENGINE
-	select SH_DMAE
-	select FW_LOADER
-
 config SND_SOC_RCAR
 	tristate "R-Car series SRU/SCU/SSIU/SSI support"
 	depends on COMMON_CLK
@@ -51,25 +28,4 @@  config SND_SOC_RZ
 	help
 	  This option enables RZ/G2L SSIF-2 sound support.
 
-##
-## Boards
-##
-
-config SND_SH7760_AC97
-	tristate "SH7760 AC97 sound support"
-	depends on CPU_SUBTYPE_SH7760 && SND_SOC_PCM_SH7760
-	select SND_SOC_SH4_HAC
-	select SND_SOC_AC97_CODEC
-	help
-	  This option enables generic sound support for the first
-	  AC97 unit of the SH7760.
-
-config SND_SIU_MIGOR
-	tristate "SIU sound support on Migo-R"
-	depends on SH_MIGOR && I2C
-	select SND_SOC_SH4_SIU
-	select SND_SOC_WM8978
-	help
-	  This option enables sound support for the SH7722 Migo-R board
-
 endmenu
diff --git a/sound/soc/sh/Makefile b/sound/soc/sh/Makefile
index f6fd79948f6ae9..c308dda887e633 100644
--- a/sound/soc/sh/Makefile
+++ b/sound/soc/sh/Makefile
@@ -1,28 +1,12 @@ 
 # SPDX-License-Identifier: GPL-2.0
-## DMA engines
-snd-soc-dma-sh7760-objs	:= dma-sh7760.o
-obj-$(CONFIG_SND_SOC_PCM_SH7760)	+= snd-soc-dma-sh7760.o
 
 ## audio units found on some SH-4
-snd-soc-hac-objs	:= hac.o
-snd-soc-ssi-objs	:= ssi.o
 snd-soc-fsi-objs	:= fsi.o
-snd-soc-siu-objs	:= siu_pcm.o siu_dai.o
-obj-$(CONFIG_SND_SOC_SH4_HAC)	+= snd-soc-hac.o
-obj-$(CONFIG_SND_SOC_SH4_SSI)	+= snd-soc-ssi.o
 obj-$(CONFIG_SND_SOC_SH4_FSI)	+= snd-soc-fsi.o
-obj-$(CONFIG_SND_SOC_SH4_SIU)	+= snd-soc-siu.o
 
 ## audio units for R-Car
 obj-$(CONFIG_SND_SOC_RCAR)	+= rcar/
 
-## boards
-snd-soc-sh7760-ac97-objs	:= sh7760-ac97.o
-snd-soc-migor-objs		:= migor.o
-
-obj-$(CONFIG_SND_SH7760_AC97)	+= snd-soc-sh7760-ac97.o
-obj-$(CONFIG_SND_SIU_MIGOR)	+= snd-soc-migor.o
-
 # RZ/G2L
 snd-soc-rz-ssi-objs		:= rz-ssi.o
 obj-$(CONFIG_SND_SOC_RZ)	+= snd-soc-rz-ssi.o
diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c
deleted file mode 100644
index 121e48f984c50c..00000000000000
--- a/sound/soc/sh/dma-sh7760.c
+++ /dev/null
@@ -1,334 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-//
-// SH7760 ("camelot") DMABRG audio DMA unit support
-//
-// Copyright (C) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// The SH7760 DMABRG provides 4 dma channels (2x rec, 2x play), which
-// trigger an interrupt when one half of the programmed transfer size
-// has been xmitted.
-//
-// FIXME: little-endian only for now
-
-#include <linux/module.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <asm/dmabrg.h>
-
-
-/* registers and bits */
-#define BRGATXSAR	0x00
-#define BRGARXDAR	0x04
-#define BRGATXTCR	0x08
-#define BRGARXTCR	0x0C
-#define BRGACR		0x10
-#define BRGATXTCNT	0x14
-#define BRGARXTCNT	0x18
-
-#define ACR_RAR		(1 << 18)
-#define ACR_RDS		(1 << 17)
-#define ACR_RDE		(1 << 16)
-#define ACR_TAR		(1 << 2)
-#define ACR_TDS		(1 << 1)
-#define ACR_TDE		(1 << 0)
-
-/* receiver/transmitter data alignment */
-#define ACR_RAM_NONE	(0 << 24)
-#define ACR_RAM_4BYTE	(1 << 24)
-#define ACR_RAM_2WORD	(2 << 24)
-#define ACR_TAM_NONE	(0 << 8)
-#define ACR_TAM_4BYTE	(1 << 8)
-#define ACR_TAM_2WORD	(2 << 8)
-
-
-struct camelot_pcm {
-	unsigned long mmio;  /* DMABRG audio channel control reg MMIO */
-	unsigned int txid;    /* ID of first DMABRG IRQ for this unit */
-
-	struct snd_pcm_substream *tx_ss;
-	unsigned long tx_period_size;
-	unsigned int  tx_period;
-
-	struct snd_pcm_substream *rx_ss;
-	unsigned long rx_period_size;
-	unsigned int  rx_period;
-
-} cam_pcm_data[2] = {
-	{
-		.mmio	=	0xFE3C0040,
-		.txid	=	DMABRGIRQ_A0TXF,
-	},
-	{
-		.mmio	=	0xFE3C0060,
-		.txid	=	DMABRGIRQ_A1TXF,
-	},
-};
-
-#define BRGREG(x)	(*(unsigned long *)(cam->mmio + (x)))
-
-/*
- * set a minimum of 16kb per period, to avoid interrupt-"storm" and
- * resulting skipping. In general, the bigger the minimum size, the
- * better for overall system performance. (The SH7760 is a puny CPU
- * with a slow SDRAM interface and poor internal bus bandwidth,
- * *especially* when the LCDC is active).  The minimum for the DMAC
- * is 8 bytes; 16kbytes are enough to get skip-free playback of a
- * 44kHz/16bit/stereo MP3 on a lightly loaded system, and maintain
- * reasonable responsiveness in MPlayer.
- */
-#define DMABRG_PERIOD_MIN		16 * 1024
-#define DMABRG_PERIOD_MAX		0x03fffffc
-#define DMABRG_PREALLOC_BUFFER		32 * 1024
-#define DMABRG_PREALLOC_BUFFER_MAX	32 * 1024
-
-static const struct snd_pcm_hardware camelot_pcm_hardware = {
-	.info = (SNDRV_PCM_INFO_MMAP |
-		SNDRV_PCM_INFO_INTERLEAVED |
-		SNDRV_PCM_INFO_BLOCK_TRANSFER |
-		SNDRV_PCM_INFO_MMAP_VALID |
-		SNDRV_PCM_INFO_BATCH),
-	.buffer_bytes_max =	DMABRG_PERIOD_MAX,
-	.period_bytes_min =	DMABRG_PERIOD_MIN,
-	.period_bytes_max =	DMABRG_PERIOD_MAX / 2,
-	.periods_min =		2,
-	.periods_max =		2,
-	.fifo_size =		128,
-};
-
-static void camelot_txdma(void *data)
-{
-	struct camelot_pcm *cam = data;
-	cam->tx_period ^= 1;
-	snd_pcm_period_elapsed(cam->tx_ss);
-}
-
-static void camelot_rxdma(void *data)
-{
-	struct camelot_pcm *cam = data;
-	cam->rx_period ^= 1;
-	snd_pcm_period_elapsed(cam->rx_ss);
-}
-
-static int camelot_pcm_open(struct snd_soc_component *component,
-			    struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
-	struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
-	int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-	int ret, dmairq;
-
-	snd_soc_set_runtime_hwparams(substream, &camelot_pcm_hardware);
-
-	/* DMABRG buffer half/full events */
-	dmairq = (recv) ? cam->txid + 2 : cam->txid;
-	if (recv) {
-		cam->rx_ss = substream;
-		ret = dmabrg_request_irq(dmairq, camelot_rxdma, cam);
-		if (unlikely(ret)) {
-			pr_debug("audio unit %d irqs already taken!\n",
-			     asoc_rtd_to_cpu(rtd, 0)->id);
-			return -EBUSY;
-		}
-		(void)dmabrg_request_irq(dmairq + 1,camelot_rxdma, cam);
-	} else {
-		cam->tx_ss = substream;
-		ret = dmabrg_request_irq(dmairq, camelot_txdma, cam);
-		if (unlikely(ret)) {
-			pr_debug("audio unit %d irqs already taken!\n",
-			     asoc_rtd_to_cpu(rtd, 0)->id);
-			return -EBUSY;
-		}
-		(void)dmabrg_request_irq(dmairq + 1, camelot_txdma, cam);
-	}
-	return 0;
-}
-
-static int camelot_pcm_close(struct snd_soc_component *component,
-			     struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
-	struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
-	int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-	int dmairq;
-
-	dmairq = (recv) ? cam->txid + 2 : cam->txid;
-
-	if (recv)
-		cam->rx_ss = NULL;
-	else
-		cam->tx_ss = NULL;
-
-	dmabrg_free_irq(dmairq + 1);
-	dmabrg_free_irq(dmairq);
-
-	return 0;
-}
-
-static int camelot_hw_params(struct snd_soc_component *component,
-			     struct snd_pcm_substream *substream,
-			     struct snd_pcm_hw_params *hw_params)
-{
-	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
-	struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
-	int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-
-	if (recv) {
-		cam->rx_period_size = params_period_bytes(hw_params);
-		cam->rx_period = 0;
-	} else {
-		cam->tx_period_size = params_period_bytes(hw_params);
-		cam->tx_period = 0;
-	}
-	return 0;
-}
-
-static int camelot_prepare(struct snd_soc_component *component,
-			   struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
-	struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
-
-	pr_debug("PCM data: addr 0x%08lx len %d\n",
-		 (u32)runtime->dma_addr, runtime->dma_bytes);
- 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		BRGREG(BRGATXSAR) = (unsigned long)runtime->dma_area;
-		BRGREG(BRGATXTCR) = runtime->dma_bytes;
-	} else {
-		BRGREG(BRGARXDAR) = (unsigned long)runtime->dma_area;
-		BRGREG(BRGARXTCR) = runtime->dma_bytes;
-	}
-
-	return 0;
-}
-
-static inline void dmabrg_play_dma_start(struct camelot_pcm *cam)
-{
-	unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
-	/* start DMABRG engine: XFER start, auto-addr-reload */
-	BRGREG(BRGACR) = acr | ACR_TDE | ACR_TAR | ACR_TAM_2WORD;
-}
-
-static inline void dmabrg_play_dma_stop(struct camelot_pcm *cam)
-{
-	unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
-	/* forcibly terminate data transmission */
-	BRGREG(BRGACR) = acr | ACR_TDS;
-}
-
-static inline void dmabrg_rec_dma_start(struct camelot_pcm *cam)
-{
-	unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
-	/* start DMABRG engine: recv start, auto-reload */
-	BRGREG(BRGACR) = acr | ACR_RDE | ACR_RAR | ACR_RAM_2WORD;
-}
-
-static inline void dmabrg_rec_dma_stop(struct camelot_pcm *cam)
-{
-	unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
-	/* forcibly terminate data receiver */
-	BRGREG(BRGACR) = acr | ACR_RDS;
-}
-
-static int camelot_trigger(struct snd_soc_component *component,
-			   struct snd_pcm_substream *substream, int cmd)
-{
-	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
-	struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
-	int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-		if (recv)
-			dmabrg_rec_dma_start(cam);
-		else
-			dmabrg_play_dma_start(cam);
-		break;
-	case SNDRV_PCM_TRIGGER_STOP:
-		if (recv)
-			dmabrg_rec_dma_stop(cam);
-		else
-			dmabrg_play_dma_stop(cam);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static snd_pcm_uframes_t camelot_pos(struct snd_soc_component *component,
-				     struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
-	struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
-	int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-	unsigned long pos;
-
-	/* cannot use the DMABRG pointer register: under load, by the
-	 * time ALSA comes around to read the register, it is already
-	 * far ahead (or worse, already done with the fragment) of the
-	 * position at the time the IRQ was triggered, which results in
-	 * fast-playback sound in my test application (ScummVM)
-	 */
-	if (recv)
-		pos = cam->rx_period ? cam->rx_period_size : 0;
-	else
-		pos = cam->tx_period ? cam->tx_period_size : 0;
-
-	return bytes_to_frames(runtime, pos);
-}
-
-static int camelot_pcm_new(struct snd_soc_component *component,
-			   struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_pcm *pcm = rtd->pcm;
-
-	/* dont use SNDRV_DMA_TYPE_DEV, since it will oops the SH kernel
-	 * in MMAP mode (i.e. aplay -M)
-	 */
-	snd_pcm_set_managed_buffer_all(pcm,
-		SNDRV_DMA_TYPE_CONTINUOUS,
-		NULL,
-		DMABRG_PREALLOC_BUFFER,	DMABRG_PREALLOC_BUFFER_MAX);
-
-	return 0;
-}
-
-static const struct snd_soc_component_driver sh7760_soc_component = {
-	.open		= camelot_pcm_open,
-	.close		= camelot_pcm_close,
-	.hw_params	= camelot_hw_params,
-	.prepare	= camelot_prepare,
-	.trigger	= camelot_trigger,
-	.pointer	= camelot_pos,
-	.pcm_construct	= camelot_pcm_new,
-};
-
-static int sh7760_soc_platform_probe(struct platform_device *pdev)
-{
-	return devm_snd_soc_register_component(&pdev->dev, &sh7760_soc_component,
-					       NULL, 0);
-}
-
-static struct platform_driver sh7760_pcm_driver = {
-	.driver = {
-			.name = "sh7760-pcm-audio",
-	},
-
-	.probe = sh7760_soc_platform_probe,
-};
-
-module_platform_driver(sh7760_pcm_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SH7760 Audio DMA (DMABRG) driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index f3edc2e3d9d7c4..c599070f2210f4 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -1372,16 +1372,7 @@  static int fsi_dma_probe(struct fsi_priv *fsi, struct fsi_stream *io, struct dev
 {
 	int is_play = fsi_stream_is_play(fsi, io);
 
-#ifdef CONFIG_SUPERH
-	dma_cap_mask_t mask;
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-
-	io->chan = dma_request_channel(mask, shdma_chan_filter,
-				       (void *)io->dma_id);
-#else
 	io->chan = dma_request_slave_channel(dev, is_play ? "tx" : "rx");
-#endif
 	if (io->chan) {
 		struct dma_slave_config cfg = {};
 		int ret;
diff --git a/sound/soc/sh/hac.c b/sound/soc/sh/hac.c
deleted file mode 100644
index 46d145cbaf2970..00000000000000
--- a/sound/soc/sh/hac.c
+++ /dev/null
@@ -1,345 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-//
-// Hitachi Audio Controller (AC97) support for SH7760/SH7780
-//
-// Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// dont forget to set IPSEL/OMSEL register bits (in your board code) to
-// enable HAC output pins!
-
-/* BIG FAT FIXME: although the SH7760 has 2 independent AC97 units, only
- * the FIRST can be used since ASoC does not pass any information to the
- * ac97_read/write() functions regarding WHICH unit to use.  You'll have
- * to edit the code a bit to use the other AC97 unit.		--mlau
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/wait.h>
-#include <linux/delay.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/ac97_codec.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-/* regs and bits */
-#define HACCR		0x08
-#define HACCSAR		0x20
-#define HACCSDR		0x24
-#define HACPCML		0x28
-#define HACPCMR		0x2C
-#define HACTIER		0x50
-#define	HACTSR		0x54
-#define HACRIER		0x58
-#define HACRSR		0x5C
-#define HACACR		0x60
-
-#define CR_CR		(1 << 15)	/* "codec-ready" indicator */
-#define CR_CDRT		(1 << 11)	/* cold reset */
-#define CR_WMRT		(1 << 10)	/* warm reset */
-#define CR_B9		(1 << 9)	/* the mysterious "bit 9" */
-#define CR_ST		(1 << 5)	/* AC97 link start bit */
-
-#define CSAR_RD		(1 << 19)	/* AC97 data read bit */
-#define CSAR_WR		(0)
-
-#define TSR_CMDAMT	(1 << 31)
-#define TSR_CMDDMT	(1 << 30)
-
-#define RSR_STARY	(1 << 22)
-#define RSR_STDRY	(1 << 21)
-
-#define ACR_DMARX16	(1 << 30)
-#define ACR_DMATX16	(1 << 29)
-#define ACR_TX12ATOM	(1 << 26)
-#define ACR_DMARX20	((1 << 24) | (1 << 22))
-#define ACR_DMATX20	((1 << 23) | (1 << 21))
-
-#define CSDR_SHIFT	4
-#define CSDR_MASK	(0xffff << CSDR_SHIFT)
-#define CSAR_SHIFT	12
-#define CSAR_MASK	(0x7f << CSAR_SHIFT)
-
-#define AC97_WRITE_RETRY	1
-#define AC97_READ_RETRY		5
-
-/* manual-suggested AC97 codec access timeouts (us) */
-#define TMO_E1	500	/* 21 < E1 < 1000 */
-#define TMO_E2	13	/* 13 < E2 */
-#define TMO_E3	21	/* 21 < E3 */
-#define TMO_E4	500	/* 21 < E4 < 1000 */
-
-struct hac_priv {
-	unsigned long mmio;	/* HAC base address */
-} hac_cpu_data[] = {
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
-	{
-		.mmio	= 0xFE240000,
-	},
-	{
-		.mmio	= 0xFE250000,
-	},
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
-	{
-		.mmio	= 0xFFE40000,
-	},
-#else
-#error "Unsupported SuperH SoC"
-#endif
-};
-
-#define HACREG(reg)	(*(unsigned long *)(hac->mmio + (reg)))
-
-/*
- * AC97 read/write flow as outlined in the SH7760 manual (pages 903-906)
- */
-static int hac_get_codec_data(struct hac_priv *hac, unsigned short r,
-			      unsigned short *v)
-{
-	unsigned int to1, to2, i;
-	unsigned short adr;
-
-	for (i = AC97_READ_RETRY; i; i--) {
-		*v = 0;
-		/* wait for HAC to receive something from the codec */
-		for (to1 = TMO_E4;
-		     to1 && !(HACREG(HACRSR) & RSR_STARY);
-		     --to1)
-			udelay(1);
-		for (to2 = TMO_E4; 
-		     to2 && !(HACREG(HACRSR) & RSR_STDRY);
-		     --to2)
-			udelay(1);
-
-		if (!to1 && !to2)
-			return 0;	/* codec comm is down */
-
-		adr = ((HACREG(HACCSAR) & CSAR_MASK) >> CSAR_SHIFT);
-		*v  = ((HACREG(HACCSDR) & CSDR_MASK) >> CSDR_SHIFT);
-
-		HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
-
-		if (r == adr)
-			break;
-
-		/* manual says: wait at least 21 usec before retrying */
-		udelay(21);
-	}
-	HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
-	return i;
-}
-
-static unsigned short hac_read_codec_aux(struct hac_priv *hac,
-					 unsigned short reg)
-{
-	unsigned short val;
-	unsigned int i, to;
-
-	for (i = AC97_READ_RETRY; i; i--) {
-		/* send_read_request */
-		local_irq_disable();
-		HACREG(HACTSR) &= ~(TSR_CMDAMT);
-		HACREG(HACCSAR) = (reg << CSAR_SHIFT) | CSAR_RD;
-		local_irq_enable();
-
-		for (to = TMO_E3;
-		     to && !(HACREG(HACTSR) & TSR_CMDAMT);
-		     --to)
-			udelay(1);
-
-		HACREG(HACTSR) &= ~TSR_CMDAMT;
-		val = 0;
-		if (hac_get_codec_data(hac, reg, &val) != 0)
-			break;
-	}
-
-	return i ? val : ~0;
-}
-
-static void hac_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
-			   unsigned short val)
-{
-	int unit_id = 0 /* ac97->private_data */;
-	struct hac_priv *hac = &hac_cpu_data[unit_id];
-	unsigned int i, to;
-	/* write_codec_aux */
-	for (i = AC97_WRITE_RETRY; i; i--) {
-		/* send_write_request */
-		local_irq_disable();
-		HACREG(HACTSR) &= ~(TSR_CMDDMT | TSR_CMDAMT);
-		HACREG(HACCSDR) = (val << CSDR_SHIFT);
-		HACREG(HACCSAR) = (reg << CSAR_SHIFT) & (~CSAR_RD);
-		local_irq_enable();
-
-		/* poll-wait for CMDAMT and CMDDMT */
-		for (to = TMO_E1;
-		     to && !(HACREG(HACTSR) & (TSR_CMDAMT|TSR_CMDDMT));
-		     --to)
-			udelay(1);
-
-		HACREG(HACTSR) &= ~(TSR_CMDAMT | TSR_CMDDMT);
-		if (to)
-			break;
-		/* timeout, try again */
-	}
-}
-
-static unsigned short hac_ac97_read(struct snd_ac97 *ac97,
-				    unsigned short reg)
-{
-	int unit_id = 0 /* ac97->private_data */;
-	struct hac_priv *hac = &hac_cpu_data[unit_id];
-	return hac_read_codec_aux(hac, reg);
-}
-
-static void hac_ac97_warmrst(struct snd_ac97 *ac97)
-{
-	int unit_id = 0 /* ac97->private_data */;
-	struct hac_priv *hac = &hac_cpu_data[unit_id];
-	unsigned int tmo;
-
-	HACREG(HACCR) = CR_WMRT | CR_ST | CR_B9;
-	msleep(10);
-	HACREG(HACCR) = CR_ST | CR_B9;
-	for (tmo = 1000; (tmo > 0) && !(HACREG(HACCR) & CR_CR); tmo--)
-		udelay(1);
-
-	if (!tmo)
-		printk(KERN_INFO "hac: reset: AC97 link down!\n");
-	/* settings this bit lets us have a conversation with codec */
-	HACREG(HACACR) |= ACR_TX12ATOM;
-}
-
-static void hac_ac97_coldrst(struct snd_ac97 *ac97)
-{
-	int unit_id = 0 /* ac97->private_data */;
-	struct hac_priv *hac;
-	hac = &hac_cpu_data[unit_id];
-
-	HACREG(HACCR) = 0;
-	HACREG(HACCR) = CR_CDRT | CR_ST | CR_B9;
-	msleep(10);
-	hac_ac97_warmrst(ac97);
-}
-
-static struct snd_ac97_bus_ops hac_ac97_ops = {
-	.read	= hac_ac97_read,
-	.write	= hac_ac97_write,
-	.reset	= hac_ac97_coldrst,
-	.warm_reset = hac_ac97_warmrst,
-};
-
-static int hac_hw_params(struct snd_pcm_substream *substream,
-			 struct snd_pcm_hw_params *params,
-			 struct snd_soc_dai *dai)
-{
-	struct hac_priv *hac = &hac_cpu_data[dai->id];
-	int d = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
-
-	switch (params->msbits) {
-	case 16:
-		HACREG(HACACR) |= d ?  ACR_DMARX16 :  ACR_DMATX16;
-		HACREG(HACACR) &= d ? ~ACR_DMARX20 : ~ACR_DMATX20;
-		break;
-	case 20:
-		HACREG(HACACR) &= d ? ~ACR_DMARX16 : ~ACR_DMATX16;
-		HACREG(HACACR) |= d ?  ACR_DMARX20 :  ACR_DMATX20;
-		break;
-	default:
-		pr_debug("hac: invalid depth %d bit\n", params->msbits);
-		return -EINVAL;
-		break;
-	}
-
-	return 0;
-}
-
-#define AC97_RATES	\
-	SNDRV_PCM_RATE_8000_192000
-
-#define AC97_FMTS	\
-	SNDRV_PCM_FMTBIT_S16_LE
-
-static const struct snd_soc_dai_ops hac_dai_ops = {
-	.hw_params	= hac_hw_params,
-};
-
-static struct snd_soc_dai_driver sh4_hac_dai[] = {
-{
-	.name			= "hac-dai.0",
-	.playback = {
-		.rates		= AC97_RATES,
-		.formats	= AC97_FMTS,
-		.channels_min	= 2,
-		.channels_max	= 2,
-	},
-	.capture = {
-		.rates		= AC97_RATES,
-		.formats	= AC97_FMTS,
-		.channels_min	= 2,
-		.channels_max	= 2,
-	},
-	.ops = &hac_dai_ops,
-},
-#ifdef CONFIG_CPU_SUBTYPE_SH7760
-{
-	.name			= "hac-dai.1",
-	.id			= 1,
-	.playback = {
-		.rates		= AC97_RATES,
-		.formats	= AC97_FMTS,
-		.channels_min	= 2,
-		.channels_max	= 2,
-	},
-	.capture = {
-		.rates		= AC97_RATES,
-		.formats	= AC97_FMTS,
-		.channels_min	= 2,
-		.channels_max	= 2,
-	},
-	.ops = &hac_dai_ops,
-
-},
-#endif
-};
-
-static const struct snd_soc_component_driver sh4_hac_component = {
-	.name			= "sh4-hac",
-	.legacy_dai_naming	= 1,
-};
-
-static int hac_soc_platform_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	ret = snd_soc_set_ac97_ops(&hac_ac97_ops);
-	if (ret != 0)
-		return ret;
-
-	return devm_snd_soc_register_component(&pdev->dev, &sh4_hac_component,
-					  sh4_hac_dai, ARRAY_SIZE(sh4_hac_dai));
-}
-
-static int hac_soc_platform_remove(struct platform_device *pdev)
-{
-	snd_soc_set_ac97_ops(NULL);
-	return 0;
-}
-
-static struct platform_driver hac_pcm_driver = {
-	.driver = {
-			.name = "hac-pcm-audio",
-	},
-
-	.probe = hac_soc_platform_probe,
-	.remove = hac_soc_platform_remove,
-};
-
-module_platform_driver(hac_pcm_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SuperH onchip HAC (AC97) audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/migor.c b/sound/soc/sh/migor.c
deleted file mode 100644
index 7082c12d3bf238..00000000000000
--- a/sound/soc/sh/migor.c
+++ /dev/null
@@ -1,205 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-//
-// ALSA SoC driver for Migo-R
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-
-#include <linux/clkdev.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-
-#include <cpu/sh7722.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-
-#include "../codecs/wm8978.h"
-#include "siu.h"
-
-/* Default 8000Hz sampling frequency */
-static unsigned long codec_freq = 8000 * 512;
-
-static unsigned int use_count;
-
-/* External clock, sourced from the codec at the SIUMCKB pin */
-static unsigned long siumckb_recalc(struct clk *clk)
-{
-	return codec_freq;
-}
-
-static struct sh_clk_ops siumckb_clk_ops = {
-	.recalc = siumckb_recalc,
-};
-
-static struct clk siumckb_clk = {
-	.ops		= &siumckb_clk_ops,
-	.rate		= 0, /* initialised at run-time */
-};
-
-static struct clk_lookup *siumckb_lookup;
-
-static int migor_hw_params(struct snd_pcm_substream *substream,
-			   struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
-	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
-	int ret;
-	unsigned int rate = params_rate(params);
-
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8978_PLL, 13000000,
-				     SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8978_OPCLKRATE, rate * 512);
-	if (ret < 0)
-		return ret;
-
-	codec_freq = rate * 512;
-	/*
-	 * This propagates the parent frequency change to children and
-	 * recalculates the frequency table
-	 */
-	clk_set_rate(&siumckb_clk, codec_freq);
-	dev_dbg(codec_dai->dev, "%s: configure %luHz\n", __func__, codec_freq);
-
-	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), SIU_CLKB_EXT,
-				     codec_freq / 2, SND_SOC_CLOCK_IN);
-
-	if (!ret)
-		use_count++;
-
-	return ret;
-}
-
-static int migor_hw_free(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
-	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
-
-	if (use_count) {
-		use_count--;
-
-		if (!use_count)
-			snd_soc_dai_set_sysclk(codec_dai, WM8978_PLL, 0,
-					       SND_SOC_CLOCK_IN);
-	} else {
-		dev_dbg(codec_dai->dev, "Unbalanced hw_free!\n");
-	}
-
-	return 0;
-}
-
-static const struct snd_soc_ops migor_dai_ops = {
-	.hw_params = migor_hw_params,
-	.hw_free = migor_hw_free,
-};
-
-static const struct snd_soc_dapm_widget migor_dapm_widgets[] = {
-	SND_SOC_DAPM_HP("Headphone", NULL),
-	SND_SOC_DAPM_MIC("Onboard Microphone", NULL),
-	SND_SOC_DAPM_MIC("External Microphone", NULL),
-};
-
-static const struct snd_soc_dapm_route audio_map[] = {
-	/* Headphone output connected to LHP/RHP, enable OUT4 for VMID */
-	{ "Headphone", NULL,  "OUT4 VMID" },
-	{ "OUT4 VMID", NULL,  "LHP" },
-	{ "OUT4 VMID", NULL,  "RHP" },
-
-	/* On-board microphone */
-	{ "RMICN", NULL, "Mic Bias" },
-	{ "RMICP", NULL, "Mic Bias" },
-	{ "Mic Bias", NULL, "Onboard Microphone" },
-
-	/* External microphone */
-	{ "LMICN", NULL, "Mic Bias" },
-	{ "LMICP", NULL, "Mic Bias" },
-	{ "Mic Bias", NULL, "External Microphone" },
-};
-
-/* migor digital audio interface glue - connects codec <--> CPU */
-SND_SOC_DAILINK_DEFS(wm8978,
-	DAILINK_COMP_ARRAY(COMP_CPU("siu-pcm-audio")),
-	DAILINK_COMP_ARRAY(COMP_CODEC("wm8978.0-001a", "wm8978-hifi")),
-	DAILINK_COMP_ARRAY(COMP_PLATFORM("siu-pcm-audio")));
-
-static struct snd_soc_dai_link migor_dai = {
-	.name = "wm8978",
-	.stream_name = "WM8978",
-	.dai_fmt = SND_SOC_DAIFMT_NB_IF | SND_SOC_DAIFMT_I2S |
-		   SND_SOC_DAIFMT_CBS_CFS,
-	.ops = &migor_dai_ops,
-	SND_SOC_DAILINK_REG(wm8978),
-};
-
-/* migor audio machine driver */
-static struct snd_soc_card snd_soc_migor = {
-	.name = "Migo-R",
-	.owner = THIS_MODULE,
-	.dai_link = &migor_dai,
-	.num_links = 1,
-
-	.dapm_widgets = migor_dapm_widgets,
-	.num_dapm_widgets = ARRAY_SIZE(migor_dapm_widgets),
-	.dapm_routes = audio_map,
-	.num_dapm_routes = ARRAY_SIZE(audio_map),
-};
-
-static struct platform_device *migor_snd_device;
-
-static int __init migor_init(void)
-{
-	int ret;
-
-	ret = clk_register(&siumckb_clk);
-	if (ret < 0)
-		return ret;
-
-	siumckb_lookup = clkdev_create(&siumckb_clk, "siumckb_clk", NULL);
-	if (!siumckb_lookup) {
-		ret = -ENOMEM;
-		goto eclkdevalloc;
-	}
-
-	/* Port number used on this machine: port B */
-	migor_snd_device = platform_device_alloc("soc-audio", 1);
-	if (!migor_snd_device) {
-		ret = -ENOMEM;
-		goto epdevalloc;
-	}
-
-	platform_set_drvdata(migor_snd_device, &snd_soc_migor);
-
-	ret = platform_device_add(migor_snd_device);
-	if (ret)
-		goto epdevadd;
-
-	return 0;
-
-epdevadd:
-	platform_device_put(migor_snd_device);
-epdevalloc:
-	clkdev_drop(siumckb_lookup);
-eclkdevalloc:
-	clk_unregister(&siumckb_clk);
-	return ret;
-}
-
-static void __exit migor_exit(void)
-{
-	clkdev_drop(siumckb_lookup);
-	clk_unregister(&siumckb_clk);
-	platform_device_unregister(migor_snd_device);
-}
-
-module_init(migor_init);
-module_exit(migor_exit);
-
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_DESCRIPTION("ALSA SoC Migor");
-MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/sh/sh7760-ac97.c b/sound/soc/sh/sh7760-ac97.c
deleted file mode 100644
index d267243a159ba6..00000000000000
--- a/sound/soc/sh/sh7760-ac97.c
+++ /dev/null
@@ -1,72 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-//
-// Generic AC97 sound support for SH7760
-//
-// (c) 2007 Manuel Lauss
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <asm/io.h>
-
-#define IPSEL 0xFE400034
-
-SND_SOC_DAILINK_DEFS(ac97,
-	DAILINK_COMP_ARRAY(COMP_CPU("hac-dai.0")),	/* HAC0 */
-	DAILINK_COMP_ARRAY(COMP_CODEC("ac97-codec", "ac97-hifi")),
-	DAILINK_COMP_ARRAY(COMP_PLATFORM("sh7760-pcm-audio")));
-
-static struct snd_soc_dai_link sh7760_ac97_dai = {
-	.name = "AC97",
-	.stream_name = "AC97 HiFi",
-	SND_SOC_DAILINK_REG(ac97),
-};
-
-static struct snd_soc_card sh7760_ac97_soc_machine  = {
-	.name = "SH7760 AC97",
-	.owner = THIS_MODULE,
-	.dai_link = &sh7760_ac97_dai,
-	.num_links = 1,
-};
-
-static struct platform_device *sh7760_ac97_snd_device;
-
-static int __init sh7760_ac97_init(void)
-{
-	int ret;
-	unsigned short ipsel;
-
-	/* enable both AC97 controllers in pinmux reg */
-	ipsel = __raw_readw(IPSEL);
-	__raw_writew(ipsel | (3 << 10), IPSEL);
-
-	ret = -ENOMEM;
-	sh7760_ac97_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!sh7760_ac97_snd_device)
-		goto out;
-
-	platform_set_drvdata(sh7760_ac97_snd_device,
-			     &sh7760_ac97_soc_machine);
-	ret = platform_device_add(sh7760_ac97_snd_device);
-
-	if (ret)
-		platform_device_put(sh7760_ac97_snd_device);
-
-out:
-	return ret;
-}
-
-static void __exit sh7760_ac97_exit(void)
-{
-	platform_device_unregister(sh7760_ac97_snd_device);
-}
-
-module_init(sh7760_ac97_init);
-module_exit(sh7760_ac97_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Generic SH7760 AC97 sound machine");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/siu.h b/sound/soc/sh/siu.h
deleted file mode 100644
index a675c36fc9d956..00000000000000
--- a/sound/soc/sh/siu.h
+++ /dev/null
@@ -1,180 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu.h - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#ifndef SIU_H
-#define SIU_H
-
-/* Common kernel and user-space firmware-building defines and types */
-
-#define YRAM0_SIZE		(0x0040 / 4)		/* 16 */
-#define YRAM1_SIZE		(0x0080 / 4)		/* 32 */
-#define YRAM2_SIZE		(0x0040 / 4)		/* 16 */
-#define YRAM3_SIZE		(0x0080 / 4)		/* 32 */
-#define YRAM4_SIZE		(0x0080 / 4)		/* 32 */
-#define YRAM_DEF_SIZE		(YRAM0_SIZE + YRAM1_SIZE + YRAM2_SIZE + \
-				 YRAM3_SIZE + YRAM4_SIZE)
-#define YRAM_FIR_SIZE		(0x0400 / 4)		/* 256 */
-#define YRAM_IIR_SIZE		(0x0200 / 4)		/* 128 */
-
-#define XRAM0_SIZE		(0x0400 / 4)		/* 256 */
-#define XRAM1_SIZE		(0x0200 / 4)		/* 128 */
-#define XRAM2_SIZE		(0x0200 / 4)		/* 128 */
-
-/* PRAM program array size */
-#define PRAM0_SIZE		(0x0100 / 4)		/* 64 */
-#define PRAM1_SIZE		((0x2000 - 0x0100) / 4)	/* 1984 */
-
-#include <linux/types.h>
-
-struct siu_spb_param {
-	__u32	ab1a;	/* input FIFO address */
-	__u32	ab0a;	/* output FIFO address */
-	__u32	dir;	/* 0=the ather except CPUOUTPUT, 1=CPUINPUT */
-	__u32	event;	/* SPB program starting conditions */
-	__u32	stfifo;	/* STFIFO register setting value */
-	__u32	trdat;	/* TRDAT register setting value */
-};
-
-struct siu_firmware {
-	__u32			yram_fir_coeff[YRAM_FIR_SIZE];
-	__u32			pram0[PRAM0_SIZE];
-	__u32			pram1[PRAM1_SIZE];
-	__u32			yram0[YRAM0_SIZE];
-	__u32			yram1[YRAM1_SIZE];
-	__u32			yram2[YRAM2_SIZE];
-	__u32			yram3[YRAM3_SIZE];
-	__u32			yram4[YRAM4_SIZE];
-	__u32			spbpar_num;
-	struct siu_spb_param	spbpar[32];
-};
-
-#ifdef __KERNEL__
-
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/sh_dma.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-
-#define SIU_PERIOD_BYTES_MAX	8192		/* DMA transfer/period size */
-#define SIU_PERIOD_BYTES_MIN	256		/* DMA transfer/period size */
-#define SIU_PERIODS_MAX		64		/* Max periods in buffer */
-#define SIU_PERIODS_MIN		4		/* Min periods in buffer */
-#define SIU_BUFFER_BYTES_MAX	(SIU_PERIOD_BYTES_MAX * SIU_PERIODS_MAX)
-
-/* SIU ports: only one can be used at a time */
-enum {
-	SIU_PORT_A,
-	SIU_PORT_B,
-	SIU_PORT_NUM,
-};
-
-/* SIU clock configuration */
-enum {
-	SIU_CLKA_PLL,
-	SIU_CLKA_EXT,
-	SIU_CLKB_PLL,
-	SIU_CLKB_EXT
-};
-
-struct device;
-struct siu_info {
-	struct device		*dev;
-	int			port_id;
-	u32 __iomem		*pram;
-	u32 __iomem		*xram;
-	u32 __iomem		*yram;
-	u32 __iomem		*reg;
-	struct siu_firmware	fw;
-};
-
-struct siu_stream {
-	struct work_struct		work;
-	struct snd_pcm_substream	*substream;
-	snd_pcm_format_t		format;
-	size_t				buf_bytes;
-	size_t				period_bytes;
-	int				cur_period;	/* Period currently in dma */
-	u32				volume;
-	snd_pcm_sframes_t		xfer_cnt;	/* Number of frames */
-	u8				rw_flg;		/* transfer status */
-	/* DMA status */
-	struct dma_chan			*chan;		/* DMA channel */
-	struct dma_async_tx_descriptor	*tx_desc;
-	dma_cookie_t			cookie;
-	struct sh_dmae_slave		param;
-};
-
-struct siu_port {
-	unsigned long		play_cap;	/* Used to track full duplex */
-	struct snd_pcm		*pcm;
-	struct siu_stream	playback;
-	struct siu_stream	capture;
-	u32			stfifo;		/* STFIFO value from firmware */
-	u32			trdat;		/* TRDAT value from firmware */
-};
-
-extern struct siu_port *siu_ports[SIU_PORT_NUM];
-
-static inline struct siu_port *siu_port_info(struct snd_pcm_substream *substream)
-{
-	struct platform_device *pdev =
-		to_platform_device(substream->pcm->card->dev);
-	return siu_ports[pdev->id];
-}
-
-/* Register access */
-static inline void siu_write32(u32 __iomem *addr, u32 val)
-{
-	__raw_writel(val, addr);
-}
-
-static inline u32 siu_read32(u32 __iomem *addr)
-{
-	return __raw_readl(addr);
-}
-
-/* SIU registers */
-#define SIU_IFCTL	(0x000 / sizeof(u32))
-#define SIU_SRCTL	(0x004 / sizeof(u32))
-#define SIU_SFORM	(0x008 / sizeof(u32))
-#define SIU_CKCTL	(0x00c / sizeof(u32))
-#define SIU_TRDAT	(0x010 / sizeof(u32))
-#define SIU_STFIFO	(0x014 / sizeof(u32))
-#define SIU_DPAK	(0x01c / sizeof(u32))
-#define SIU_CKREV	(0x020 / sizeof(u32))
-#define SIU_EVNTC	(0x028 / sizeof(u32))
-#define SIU_SBCTL	(0x040 / sizeof(u32))
-#define SIU_SBPSET	(0x044 / sizeof(u32))
-#define SIU_SBFSTS	(0x068 / sizeof(u32))
-#define SIU_SBDVCA	(0x06c / sizeof(u32))
-#define SIU_SBDVCB	(0x070 / sizeof(u32))
-#define SIU_SBACTIV	(0x074 / sizeof(u32))
-#define SIU_DMAIA	(0x090 / sizeof(u32))
-#define SIU_DMAIB	(0x094 / sizeof(u32))
-#define SIU_DMAOA	(0x098 / sizeof(u32))
-#define SIU_DMAOB	(0x09c / sizeof(u32))
-#define SIU_DMAML	(0x0a0 / sizeof(u32))
-#define SIU_SPSTS	(0x0cc / sizeof(u32))
-#define SIU_SPCTL	(0x0d0 / sizeof(u32))
-#define SIU_BRGASEL	(0x100 / sizeof(u32))
-#define SIU_BRRA	(0x104 / sizeof(u32))
-#define SIU_BRGBSEL	(0x108 / sizeof(u32))
-#define SIU_BRRB	(0x10c / sizeof(u32))
-
-extern const struct snd_soc_component_driver siu_component;
-extern struct siu_info *siu_i2s_data;
-
-int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card);
-void siu_free_port(struct siu_port *port_info);
-
-#endif
-
-#endif /* SIU_H */
diff --git a/sound/soc/sh/siu_dai.c b/sound/soc/sh/siu_dai.c
deleted file mode 100644
index f2a386fcd92e4d..00000000000000
--- a/sound/soc/sh/siu_dai.c
+++ /dev/null
@@ -1,799 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu_dai.c - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#include <linux/delay.h>
-#include <linux/firmware.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-#include <asm/siu.h>
-
-#include <sound/control.h>
-#include <sound/soc.h>
-
-#include "siu.h"
-
-/* Board specifics */
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-# define SIU_MAX_VOLUME		0x1000
-#else
-# define SIU_MAX_VOLUME		0x7fff
-#endif
-
-#define PRAM_SIZE	0x2000
-#define XRAM_SIZE	0x800
-#define YRAM_SIZE	0x800
-
-#define XRAM_OFFSET	0x4000
-#define YRAM_OFFSET	0x6000
-#define REG_OFFSET	0xc000
-
-#define PLAYBACK_ENABLED	1
-#define CAPTURE_ENABLED		2
-
-#define VOLUME_CAPTURE		0
-#define VOLUME_PLAYBACK		1
-#define DFLT_VOLUME_LEVEL	0x08000800
-
-/*
- * SPDIF is only available on port A and on some SIU implementations it is only
- * available for input. Due to the lack of hardware to test it, SPDIF is left
- * disabled in this driver version
- */
-struct format_flag {
-	u32	i2s;
-	u32	pcm;
-	u32	spdif;
-	u32	mask;
-};
-
-struct port_flag {
-	struct format_flag	playback;
-	struct format_flag	capture;
-};
-
-struct siu_info *siu_i2s_data;
-
-static struct port_flag siu_flags[SIU_PORT_NUM] = {
-	[SIU_PORT_A] = {
-		.playback = {
-			.i2s	= 0x50000000,
-			.pcm	= 0x40000000,
-			.spdif	= 0x80000000,	/* not on all SIU versions */
-			.mask	= 0xd0000000,
-		},
-		.capture = {
-			.i2s	= 0x05000000,
-			.pcm	= 0x04000000,
-			.spdif	= 0x08000000,
-			.mask	= 0x0d000000,
-		},
-	},
-	[SIU_PORT_B] = {
-		.playback = {
-			.i2s	= 0x00500000,
-			.pcm	= 0x00400000,
-			.spdif	= 0,		/* impossible - turn off */
-			.mask	= 0x00500000,
-		},
-		.capture = {
-			.i2s	= 0x00050000,
-			.pcm	= 0x00040000,
-			.spdif	= 0,		/* impossible - turn off */
-			.mask	= 0x00050000,
-		},
-	},
-};
-
-static void siu_dai_start(struct siu_port *port_info)
-{
-	struct siu_info *info = siu_i2s_data;
-	u32 __iomem *base = info->reg;
-
-	dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
-
-	/* Issue software reset to siu */
-	siu_write32(base + SIU_SRCTL, 0);
-
-	/* Wait for the reset to take effect */
-	udelay(1);
-
-	port_info->stfifo = 0;
-	port_info->trdat = 0;
-
-	/* portA, portB, SIU operate */
-	siu_write32(base + SIU_SRCTL, 0x301);
-
-	/* portA=256fs, portB=256fs */
-	siu_write32(base + SIU_CKCTL, 0x40400000);
-
-	/* portA's BRG does not divide SIUCKA */
-	siu_write32(base + SIU_BRGASEL, 0);
-	siu_write32(base + SIU_BRRA, 0);
-
-	/* portB's BRG divides SIUCKB by half */
-	siu_write32(base + SIU_BRGBSEL, 1);
-	siu_write32(base + SIU_BRRB, 0);
-
-	siu_write32(base + SIU_IFCTL, 0x44440000);
-
-	/* portA: 32 bit/fs, master; portB: 32 bit/fs, master */
-	siu_write32(base + SIU_SFORM, 0x0c0c0000);
-
-	/*
-	 * Volume levels: looks like the DSP firmware implements volume controls
-	 * differently from what's described in the datasheet
-	 */
-	siu_write32(base + SIU_SBDVCA, port_info->playback.volume);
-	siu_write32(base + SIU_SBDVCB, port_info->capture.volume);
-}
-
-static void siu_dai_stop(struct siu_port *port_info)
-{
-	struct siu_info *info = siu_i2s_data;
-	u32 __iomem *base = info->reg;
-
-	/* SIU software reset */
-	siu_write32(base + SIU_SRCTL, 0);
-}
-
-static void siu_dai_spbAselect(struct siu_port *port_info)
-{
-	struct siu_info *info = siu_i2s_data;
-	struct siu_firmware *fw = &info->fw;
-	u32 *ydef = fw->yram0;
-	u32 idx;
-
-	/* path A use */
-	if (!info->port_id)
-		idx = 1;		/* portA */
-	else
-		idx = 2;		/* portB */
-
-	ydef[0] = (fw->spbpar[idx].ab1a << 16) |
-		(fw->spbpar[idx].ab0a << 8) |
-		(fw->spbpar[idx].dir << 7) | 3;
-	ydef[1] = fw->yram0[1];	/* 0x03000300 */
-	ydef[2] = (16 / 2) << 24;
-	ydef[3] = fw->yram0[3];	/* 0 */
-	ydef[4] = fw->yram0[4];	/* 0 */
-	ydef[7] = fw->spbpar[idx].event;
-	port_info->stfifo |= fw->spbpar[idx].stfifo;
-	port_info->trdat |= fw->spbpar[idx].trdat;
-}
-
-static void siu_dai_spbBselect(struct siu_port *port_info)
-{
-	struct siu_info *info = siu_i2s_data;
-	struct siu_firmware *fw = &info->fw;
-	u32 *ydef = fw->yram0;
-	u32 idx;
-
-	/* path B use */
-	if (!info->port_id)
-		idx = 7;		/* portA */
-	else
-		idx = 8;		/* portB */
-
-	ydef[5] = (fw->spbpar[idx].ab1a << 16) |
-		(fw->spbpar[idx].ab0a << 8) | 1;
-	ydef[6] = fw->spbpar[idx].event;
-	port_info->stfifo |= fw->spbpar[idx].stfifo;
-	port_info->trdat |= fw->spbpar[idx].trdat;
-}
-
-static void siu_dai_open(struct siu_stream *siu_stream)
-{
-	struct siu_info *info = siu_i2s_data;
-	u32 __iomem *base = info->reg;
-	u32 srctl, ifctl;
-
-	srctl = siu_read32(base + SIU_SRCTL);
-	ifctl = siu_read32(base + SIU_IFCTL);
-
-	switch (info->port_id) {
-	case SIU_PORT_A:
-		/* portA operates */
-		srctl |= 0x200;
-		ifctl &= ~0xc2;
-		break;
-	case SIU_PORT_B:
-		/* portB operates */
-		srctl |= 0x100;
-		ifctl &= ~0x31;
-		break;
-	}
-
-	siu_write32(base + SIU_SRCTL, srctl);
-	/* Unmute and configure portA */
-	siu_write32(base + SIU_IFCTL, ifctl);
-}
-
-/*
- * At the moment only fixed Left-upper, Left-lower, Right-upper, Right-lower
- * packing is supported
- */
-static void siu_dai_pcmdatapack(struct siu_stream *siu_stream)
-{
-	struct siu_info *info = siu_i2s_data;
-	u32 __iomem *base = info->reg;
-	u32 dpak;
-
-	dpak = siu_read32(base + SIU_DPAK);
-
-	switch (info->port_id) {
-	case SIU_PORT_A:
-		dpak &= ~0xc0000000;
-		break;
-	case SIU_PORT_B:
-		dpak &= ~0x00c00000;
-		break;
-	}
-
-	siu_write32(base + SIU_DPAK, dpak);
-}
-
-static int siu_dai_spbstart(struct siu_port *port_info)
-{
-	struct siu_info *info = siu_i2s_data;
-	u32 __iomem *base = info->reg;
-	struct siu_firmware *fw = &info->fw;
-	u32 *ydef = fw->yram0;
-	int cnt;
-	u32 __iomem *add;
-	u32 *ptr;
-
-	/* Load SPB Program in PRAM */
-	ptr = fw->pram0;
-	add = info->pram;
-	for (cnt = 0; cnt < PRAM0_SIZE; cnt++, add++, ptr++)
-		siu_write32(add, *ptr);
-
-	ptr = fw->pram1;
-	add = info->pram + (0x0100 / sizeof(u32));
-	for (cnt = 0; cnt < PRAM1_SIZE; cnt++, add++, ptr++)
-		siu_write32(add, *ptr);
-
-	/* XRAM initialization */
-	add = info->xram;
-	for (cnt = 0; cnt < XRAM0_SIZE + XRAM1_SIZE + XRAM2_SIZE; cnt++, add++)
-		siu_write32(add, 0);
-
-	/* YRAM variable area initialization */
-	add = info->yram;
-	for (cnt = 0; cnt < YRAM_DEF_SIZE; cnt++, add++)
-		siu_write32(add, ydef[cnt]);
-
-	/* YRAM FIR coefficient area initialization */
-	add = info->yram + (0x0200 / sizeof(u32));
-	for (cnt = 0; cnt < YRAM_FIR_SIZE; cnt++, add++)
-		siu_write32(add, fw->yram_fir_coeff[cnt]);
-
-	/* YRAM IIR coefficient area initialization */
-	add = info->yram + (0x0600 / sizeof(u32));
-	for (cnt = 0; cnt < YRAM_IIR_SIZE; cnt++, add++)
-		siu_write32(add, 0);
-
-	siu_write32(base + SIU_TRDAT, port_info->trdat);
-	port_info->trdat = 0x0;
-
-
-	/* SPB start condition: software */
-	siu_write32(base + SIU_SBACTIV, 0);
-	/* Start SPB */
-	siu_write32(base + SIU_SBCTL, 0xc0000000);
-	/* Wait for program to halt */
-	cnt = 0x10000;
-	while (--cnt && siu_read32(base + SIU_SBCTL) != 0x80000000)
-		cpu_relax();
-
-	if (!cnt)
-		return -EBUSY;
-
-	/* SPB program start address setting */
-	siu_write32(base + SIU_SBPSET, 0x00400000);
-	/* SPB hardware start(FIFOCTL source) */
-	siu_write32(base + SIU_SBACTIV, 0xc0000000);
-
-	return 0;
-}
-
-static void siu_dai_spbstop(struct siu_port *port_info)
-{
-	struct siu_info *info = siu_i2s_data;
-	u32 __iomem *base = info->reg;
-
-	siu_write32(base + SIU_SBACTIV, 0);
-	/* SPB stop */
-	siu_write32(base + SIU_SBCTL, 0);
-
-	port_info->stfifo = 0;
-}
-
-/*		API functions		*/
-
-/* Playback and capture hardware properties are identical */
-static const struct snd_pcm_hardware siu_dai_pcm_hw = {
-	.info			= SNDRV_PCM_INFO_INTERLEAVED,
-	.formats		= SNDRV_PCM_FMTBIT_S16,
-	.rates			= SNDRV_PCM_RATE_8000_48000,
-	.rate_min		= 8000,
-	.rate_max		= 48000,
-	.channels_min		= 2,
-	.channels_max		= 2,
-	.buffer_bytes_max	= SIU_BUFFER_BYTES_MAX,
-	.period_bytes_min	= SIU_PERIOD_BYTES_MIN,
-	.period_bytes_max	= SIU_PERIOD_BYTES_MAX,
-	.periods_min		= SIU_PERIODS_MIN,
-	.periods_max		= SIU_PERIODS_MAX,
-};
-
-static int siu_dai_info_volume(struct snd_kcontrol *kctrl,
-			       struct snd_ctl_elem_info *uinfo)
-{
-	struct siu_port *port_info = snd_kcontrol_chip(kctrl);
-
-	dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
-
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-	uinfo->count = 2;
-	uinfo->value.integer.min = 0;
-	uinfo->value.integer.max = SIU_MAX_VOLUME;
-
-	return 0;
-}
-
-static int siu_dai_get_volume(struct snd_kcontrol *kctrl,
-			      struct snd_ctl_elem_value *ucontrol)
-{
-	struct siu_port *port_info = snd_kcontrol_chip(kctrl);
-	struct device *dev = port_info->pcm->card->dev;
-	u32 vol;
-
-	dev_dbg(dev, "%s\n", __func__);
-
-	switch (kctrl->private_value) {
-	case VOLUME_PLAYBACK:
-		/* Playback is always on port 0 */
-		vol = port_info->playback.volume;
-		ucontrol->value.integer.value[0] = vol & 0xffff;
-		ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
-		break;
-	case VOLUME_CAPTURE:
-		/* Capture is always on port 1 */
-		vol = port_info->capture.volume;
-		ucontrol->value.integer.value[0] = vol & 0xffff;
-		ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
-		break;
-	default:
-		dev_err(dev, "%s() invalid private_value=%ld\n",
-			__func__, kctrl->private_value);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int siu_dai_put_volume(struct snd_kcontrol *kctrl,
-			      struct snd_ctl_elem_value *ucontrol)
-{
-	struct siu_port *port_info = snd_kcontrol_chip(kctrl);
-	struct device *dev = port_info->pcm->card->dev;
-	struct siu_info *info = siu_i2s_data;
-	u32 __iomem *base = info->reg;
-	u32 new_vol;
-	u32 cur_vol;
-
-	dev_dbg(dev, "%s\n", __func__);
-
-	if (ucontrol->value.integer.value[0] < 0 ||
-	    ucontrol->value.integer.value[0] > SIU_MAX_VOLUME ||
-	    ucontrol->value.integer.value[1] < 0 ||
-	    ucontrol->value.integer.value[1] > SIU_MAX_VOLUME)
-		return -EINVAL;
-
-	new_vol = ucontrol->value.integer.value[0] |
-		ucontrol->value.integer.value[1] << 16;
-
-	/* See comment above - DSP firmware implementation */
-	switch (kctrl->private_value) {
-	case VOLUME_PLAYBACK:
-		/* Playback is always on port 0 */
-		cur_vol = port_info->playback.volume;
-		siu_write32(base + SIU_SBDVCA, new_vol);
-		port_info->playback.volume = new_vol;
-		break;
-	case VOLUME_CAPTURE:
-		/* Capture is always on port 1 */
-		cur_vol = port_info->capture.volume;
-		siu_write32(base + SIU_SBDVCB, new_vol);
-		port_info->capture.volume = new_vol;
-		break;
-	default:
-		dev_err(dev, "%s() invalid private_value=%ld\n",
-			__func__, kctrl->private_value);
-		return -EINVAL;
-	}
-
-	if (cur_vol != new_vol)
-		return 1;
-
-	return 0;
-}
-
-static const struct snd_kcontrol_new playback_controls = {
-	.iface		= SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name		= "PCM Playback Volume",
-	.index		= 0,
-	.info		= siu_dai_info_volume,
-	.get		= siu_dai_get_volume,
-	.put		= siu_dai_put_volume,
-	.private_value	= VOLUME_PLAYBACK,
-};
-
-static const struct snd_kcontrol_new capture_controls = {
-	.iface		= SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name		= "PCM Capture Volume",
-	.index		= 0,
-	.info		= siu_dai_info_volume,
-	.get		= siu_dai_get_volume,
-	.put		= siu_dai_put_volume,
-	.private_value	= VOLUME_CAPTURE,
-};
-
-int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card)
-{
-	struct device *dev = card->dev;
-	struct snd_kcontrol *kctrl;
-	int ret;
-
-	*port_info = kzalloc(sizeof(**port_info), GFP_KERNEL);
-	if (!*port_info)
-		return -ENOMEM;
-
-	dev_dbg(dev, "%s: port #%d@%p\n", __func__, port, *port_info);
-
-	(*port_info)->playback.volume = DFLT_VOLUME_LEVEL;
-	(*port_info)->capture.volume = DFLT_VOLUME_LEVEL;
-
-	/*
-	 * Add mixer support. The SPB is used to change the volume. Both
-	 * ports use the same SPB. Therefore, we only register one
-	 * control instance since it will be used by both channels.
-	 * In error case we continue without controls.
-	 */
-	kctrl = snd_ctl_new1(&playback_controls, *port_info);
-	ret = snd_ctl_add(card, kctrl);
-	if (ret < 0)
-		dev_err(dev,
-			"failed to add playback controls %p port=%d err=%d\n",
-			kctrl, port, ret);
-
-	kctrl = snd_ctl_new1(&capture_controls, *port_info);
-	ret = snd_ctl_add(card, kctrl);
-	if (ret < 0)
-		dev_err(dev,
-			"failed to add capture controls %p port=%d err=%d\n",
-			kctrl, port, ret);
-
-	return 0;
-}
-
-void siu_free_port(struct siu_port *port_info)
-{
-	kfree(port_info);
-}
-
-static int siu_dai_startup(struct snd_pcm_substream *substream,
-			   struct snd_soc_dai *dai)
-{
-	struct siu_info *info = snd_soc_dai_get_drvdata(dai);
-	struct snd_pcm_runtime *rt = substream->runtime;
-	struct siu_port	*port_info = siu_port_info(substream);
-	int ret;
-
-	dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
-		info->port_id, port_info);
-
-	snd_soc_set_runtime_hwparams(substream, &siu_dai_pcm_hw);
-
-	ret = snd_pcm_hw_constraint_integer(rt, SNDRV_PCM_HW_PARAM_PERIODS);
-	if (unlikely(ret < 0))
-		return ret;
-
-	siu_dai_start(port_info);
-
-	return 0;
-}
-
-static void siu_dai_shutdown(struct snd_pcm_substream *substream,
-			     struct snd_soc_dai *dai)
-{
-	struct siu_info *info = snd_soc_dai_get_drvdata(dai);
-	struct siu_port	*port_info = siu_port_info(substream);
-
-	dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
-		info->port_id, port_info);
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		port_info->play_cap &= ~PLAYBACK_ENABLED;
-	else
-		port_info->play_cap &= ~CAPTURE_ENABLED;
-
-	/* Stop the siu if the other stream is not using it */
-	if (!port_info->play_cap) {
-		/* during stmread or stmwrite ? */
-		if (WARN_ON(port_info->playback.rw_flg || port_info->capture.rw_flg))
-			return;
-		siu_dai_spbstop(port_info);
-		siu_dai_stop(port_info);
-	}
-}
-
-/* PCM part of siu_dai_playback_prepare() / siu_dai_capture_prepare() */
-static int siu_dai_prepare(struct snd_pcm_substream *substream,
-			   struct snd_soc_dai *dai)
-{
-	struct siu_info *info = snd_soc_dai_get_drvdata(dai);
-	struct snd_pcm_runtime *rt = substream->runtime;
-	struct siu_port *port_info = siu_port_info(substream);
-	struct siu_stream *siu_stream;
-	int self, ret;
-
-	dev_dbg(substream->pcm->card->dev,
-		"%s: port %d, active streams %lx, %d channels\n",
-		__func__, info->port_id, port_info->play_cap, rt->channels);
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		self = PLAYBACK_ENABLED;
-		siu_stream = &port_info->playback;
-	} else {
-		self = CAPTURE_ENABLED;
-		siu_stream = &port_info->capture;
-	}
-
-	/* Set up the siu if not already done */
-	if (!port_info->play_cap) {
-		siu_stream->rw_flg = 0;	/* stream-data transfer flag */
-
-		siu_dai_spbAselect(port_info);
-		siu_dai_spbBselect(port_info);
-
-		siu_dai_open(siu_stream);
-
-		siu_dai_pcmdatapack(siu_stream);
-
-		ret = siu_dai_spbstart(port_info);
-		if (ret < 0)
-			goto fail;
-	} else {
-		ret = 0;
-	}
-
-	port_info->play_cap |= self;
-
-fail:
-	return ret;
-}
-
-/*
- * SIU can set bus format to I2S / PCM / SPDIF independently for playback and
- * capture, however, the current API sets the bus format globally for a DAI.
- */
-static int siu_dai_set_fmt(struct snd_soc_dai *dai,
-			   unsigned int fmt)
-{
-	struct siu_info *info = snd_soc_dai_get_drvdata(dai);
-	u32 __iomem *base = info->reg;
-	u32 ifctl;
-
-	dev_dbg(dai->dev, "%s: fmt 0x%x on port %d\n",
-		__func__, fmt, info->port_id);
-
-	if (info->port_id < 0)
-		return -ENODEV;
-
-	/* Here select between I2S / PCM / SPDIF */
-	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-	case SND_SOC_DAIFMT_I2S:
-		ifctl = siu_flags[info->port_id].playback.i2s |
-			siu_flags[info->port_id].capture.i2s;
-		break;
-	case SND_SOC_DAIFMT_LEFT_J:
-		ifctl = siu_flags[info->port_id].playback.pcm |
-			siu_flags[info->port_id].capture.pcm;
-		break;
-	/* SPDIF disabled - see comment at the top */
-	default:
-		return -EINVAL;
-	}
-
-	ifctl |= ~(siu_flags[info->port_id].playback.mask |
-		   siu_flags[info->port_id].capture.mask) &
-		siu_read32(base + SIU_IFCTL);
-	siu_write32(base + SIU_IFCTL, ifctl);
-
-	return 0;
-}
-
-static int siu_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
-			      unsigned int freq, int dir)
-{
-	struct clk *siu_clk, *parent_clk;
-	char *siu_name, *parent_name;
-	int ret;
-
-	if (dir != SND_SOC_CLOCK_IN)
-		return -EINVAL;
-
-	dev_dbg(dai->dev, "%s: using clock %d\n", __func__, clk_id);
-
-	switch (clk_id) {
-	case SIU_CLKA_PLL:
-		siu_name = "siua_clk";
-		parent_name = "pll_clk";
-		break;
-	case SIU_CLKA_EXT:
-		siu_name = "siua_clk";
-		parent_name = "siumcka_clk";
-		break;
-	case SIU_CLKB_PLL:
-		siu_name = "siub_clk";
-		parent_name = "pll_clk";
-		break;
-	case SIU_CLKB_EXT:
-		siu_name = "siub_clk";
-		parent_name = "siumckb_clk";
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	siu_clk = clk_get(dai->dev, siu_name);
-	if (IS_ERR(siu_clk)) {
-		dev_err(dai->dev, "%s: cannot get a SIU clock: %ld\n", __func__,
-			PTR_ERR(siu_clk));
-		return PTR_ERR(siu_clk);
-	}
-
-	parent_clk = clk_get(dai->dev, parent_name);
-	if (IS_ERR(parent_clk)) {
-		ret = PTR_ERR(parent_clk);
-		dev_err(dai->dev, "cannot get a SIU clock parent: %d\n", ret);
-		goto epclkget;
-	}
-
-	ret = clk_set_parent(siu_clk, parent_clk);
-	if (ret < 0) {
-		dev_err(dai->dev, "cannot reparent the SIU clock: %d\n", ret);
-		goto eclksetp;
-	}
-
-	ret = clk_set_rate(siu_clk, freq);
-	if (ret < 0)
-		dev_err(dai->dev, "cannot set SIU clock rate: %d\n", ret);
-
-	/* TODO: when clkdev gets reference counting we'll move these to siu_dai_shutdown() */
-eclksetp:
-	clk_put(parent_clk);
-epclkget:
-	clk_put(siu_clk);
-
-	return ret;
-}
-
-static const struct snd_soc_dai_ops siu_dai_ops = {
-	.startup	= siu_dai_startup,
-	.shutdown	= siu_dai_shutdown,
-	.prepare	= siu_dai_prepare,
-	.set_sysclk	= siu_dai_set_sysclk,
-	.set_fmt	= siu_dai_set_fmt,
-};
-
-static struct snd_soc_dai_driver siu_i2s_dai = {
-	.name	= "siu-i2s-dai",
-	.playback = {
-		.channels_min = 2,
-		.channels_max = 2,
-		.formats = SNDRV_PCM_FMTBIT_S16,
-		.rates = SNDRV_PCM_RATE_8000_48000,
-	},
-	.capture = {
-		.channels_min = 2,
-		.channels_max = 2,
-		.formats = SNDRV_PCM_FMTBIT_S16,
-		.rates = SNDRV_PCM_RATE_8000_48000,
-	 },
-	.ops = &siu_dai_ops,
-};
-
-static int siu_probe(struct platform_device *pdev)
-{
-	const struct firmware *fw_entry;
-	struct resource *res, *region;
-	struct siu_info *info;
-	int ret;
-
-	info = devm_kmalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-	siu_i2s_data = info;
-	info->dev = &pdev->dev;
-
-	ret = request_firmware(&fw_entry, "siu_spb.bin", &pdev->dev);
-	if (ret)
-		return ret;
-
-	/*
-	 * Loaded firmware is "const" - read only, but we have to modify it in
-	 * snd_siu_sh7343_spbAselect() and snd_siu_sh7343_spbBselect()
-	 */
-	memcpy(&info->fw, fw_entry->data, fw_entry->size);
-
-	release_firmware(fw_entry);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	region = devm_request_mem_region(&pdev->dev, res->start,
-					 resource_size(res), pdev->name);
-	if (!region) {
-		dev_err(&pdev->dev, "SIU region already claimed\n");
-		return -EBUSY;
-	}
-
-	info->pram = devm_ioremap(&pdev->dev, res->start, PRAM_SIZE);
-	if (!info->pram)
-		return -ENOMEM;
-	info->xram = devm_ioremap(&pdev->dev, res->start + XRAM_OFFSET,
-				  XRAM_SIZE);
-	if (!info->xram)
-		return -ENOMEM;
-	info->yram = devm_ioremap(&pdev->dev, res->start + YRAM_OFFSET,
-				  YRAM_SIZE);
-	if (!info->yram)
-		return -ENOMEM;
-	info->reg = devm_ioremap(&pdev->dev, res->start + REG_OFFSET,
-			    resource_size(res) - REG_OFFSET);
-	if (!info->reg)
-		return -ENOMEM;
-
-	dev_set_drvdata(&pdev->dev, info);
-
-	/* register using ARRAY version so we can keep dai name */
-	ret = devm_snd_soc_register_component(&pdev->dev, &siu_component,
-					      &siu_i2s_dai, 1);
-	if (ret < 0)
-		return ret;
-
-	pm_runtime_enable(&pdev->dev);
-
-	return 0;
-}
-
-static int siu_remove(struct platform_device *pdev)
-{
-	pm_runtime_disable(&pdev->dev);
-	return 0;
-}
-
-static struct platform_driver siu_driver = {
-	.driver 	= {
-		.name	= "siu-pcm-audio",
-	},
-	.probe		= siu_probe,
-	.remove		= siu_remove,
-};
-
-module_platform_driver(siu_driver);
-
-MODULE_AUTHOR("Carlos Munoz <carlos@kenati.com>");
-MODULE_DESCRIPTION("ALSA SoC SH7722 SIU driver");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/sh/siu_pcm.c b/sound/soc/sh/siu_pcm.c
deleted file mode 100644
index f15ff36e793455..00000000000000
--- a/sound/soc/sh/siu_pcm.c
+++ /dev/null
@@ -1,553 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu_pcm.c - ALSA driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <sound/control.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <asm/siu.h>
-
-#include "siu.h"
-
-#define DRV_NAME "siu-i2s"
-#define GET_MAX_PERIODS(buf_bytes, period_bytes) \
-				((buf_bytes) / (period_bytes))
-#define PERIOD_OFFSET(buf_addr, period_num, period_bytes) \
-				((buf_addr) + ((period_num) * (period_bytes)))
-
-#define RWF_STM_RD		0x01		/* Read in progress */
-#define RWF_STM_WT		0x02		/* Write in progress */
-
-struct siu_port *siu_ports[SIU_PORT_NUM];
-
-/* transfersize is number of u32 dma transfers per period */
-static int siu_pcm_stmwrite_stop(struct siu_port *port_info)
-{
-	struct siu_info *info = siu_i2s_data;
-	u32 __iomem *base = info->reg;
-	struct siu_stream *siu_stream = &port_info->playback;
-	u32 stfifo;
-
-	if (!siu_stream->rw_flg)
-		return -EPERM;
-
-	/* output FIFO disable */
-	stfifo = siu_read32(base + SIU_STFIFO);
-	siu_write32(base + SIU_STFIFO, stfifo & ~0x0c180c18);
-	pr_debug("%s: STFIFO %x -> %x\n", __func__,
-		 stfifo, stfifo & ~0x0c180c18);
-
-	/* during stmwrite clear */
-	siu_stream->rw_flg = 0;
-
-	return 0;
-}
-
-static int siu_pcm_stmwrite_start(struct siu_port *port_info)
-{
-	struct siu_stream *siu_stream = &port_info->playback;
-
-	if (siu_stream->rw_flg)
-		return -EPERM;
-
-	/* Current period in buffer */
-	port_info->playback.cur_period = 0;
-
-	/* during stmwrite flag set */
-	siu_stream->rw_flg = RWF_STM_WT;
-
-	/* DMA transfer start */
-	queue_work(system_highpri_wq, &siu_stream->work);
-
-	return 0;
-}
-
-static void siu_dma_tx_complete(void *arg)
-{
-	struct siu_stream *siu_stream = arg;
-
-	if (!siu_stream->rw_flg)
-		return;
-
-	/* Update completed period count */
-	if (++siu_stream->cur_period >=
-	    GET_MAX_PERIODS(siu_stream->buf_bytes,
-			    siu_stream->period_bytes))
-		siu_stream->cur_period = 0;
-
-	pr_debug("%s: done period #%d (%u/%u bytes), cookie %d\n",
-		__func__, siu_stream->cur_period,
-		siu_stream->cur_period * siu_stream->period_bytes,
-		siu_stream->buf_bytes, siu_stream->cookie);
-
-	queue_work(system_highpri_wq, &siu_stream->work);
-
-	/* Notify alsa: a period is done */
-	snd_pcm_period_elapsed(siu_stream->substream);
-}
-
-static int siu_pcm_wr_set(struct siu_port *port_info,
-			  dma_addr_t buff, u32 size)
-{
-	struct siu_info *info = siu_i2s_data;
-	u32 __iomem *base = info->reg;
-	struct siu_stream *siu_stream = &port_info->playback;
-	struct snd_pcm_substream *substream = siu_stream->substream;
-	struct device *dev = substream->pcm->card->dev;
-	struct dma_async_tx_descriptor *desc;
-	dma_cookie_t cookie;
-	struct scatterlist sg;
-	u32 stfifo;
-
-	sg_init_table(&sg, 1);
-	sg_set_page(&sg, pfn_to_page(PFN_DOWN(buff)),
-		    size, offset_in_page(buff));
-	sg_dma_len(&sg) = size;
-	sg_dma_address(&sg) = buff;
-
-	desc = dmaengine_prep_slave_sg(siu_stream->chan,
-		&sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc) {
-		dev_err(dev, "Failed to allocate a dma descriptor\n");
-		return -ENOMEM;
-	}
-
-	desc->callback = siu_dma_tx_complete;
-	desc->callback_param = siu_stream;
-	cookie = dmaengine_submit(desc);
-	if (cookie < 0) {
-		dev_err(dev, "Failed to submit a dma transfer\n");
-		return cookie;
-	}
-
-	siu_stream->tx_desc = desc;
-	siu_stream->cookie = cookie;
-
-	dma_async_issue_pending(siu_stream->chan);
-
-	/* only output FIFO enable */
-	stfifo = siu_read32(base + SIU_STFIFO);
-	siu_write32(base + SIU_STFIFO, stfifo | (port_info->stfifo & 0x0c180c18));
-	dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
-		stfifo, stfifo | (port_info->stfifo & 0x0c180c18));
-
-	return 0;
-}
-
-static int siu_pcm_rd_set(struct siu_port *port_info,
-			  dma_addr_t buff, size_t size)
-{
-	struct siu_info *info = siu_i2s_data;
-	u32 __iomem *base = info->reg;
-	struct siu_stream *siu_stream = &port_info->capture;
-	struct snd_pcm_substream *substream = siu_stream->substream;
-	struct device *dev = substream->pcm->card->dev;
-	struct dma_async_tx_descriptor *desc;
-	dma_cookie_t cookie;
-	struct scatterlist sg;
-	u32 stfifo;
-
-	dev_dbg(dev, "%s: %u@%llx\n", __func__, size, (unsigned long long)buff);
-
-	sg_init_table(&sg, 1);
-	sg_set_page(&sg, pfn_to_page(PFN_DOWN(buff)),
-		    size, offset_in_page(buff));
-	sg_dma_len(&sg) = size;
-	sg_dma_address(&sg) = buff;
-
-	desc = dmaengine_prep_slave_sg(siu_stream->chan,
-		&sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc) {
-		dev_err(dev, "Failed to allocate dma descriptor\n");
-		return -ENOMEM;
-	}
-
-	desc->callback = siu_dma_tx_complete;
-	desc->callback_param = siu_stream;
-	cookie = dmaengine_submit(desc);
-	if (cookie < 0) {
-		dev_err(dev, "Failed to submit dma descriptor\n");
-		return cookie;
-	}
-
-	siu_stream->tx_desc = desc;
-	siu_stream->cookie = cookie;
-
-	dma_async_issue_pending(siu_stream->chan);
-
-	/* only input FIFO enable */
-	stfifo = siu_read32(base + SIU_STFIFO);
-	siu_write32(base + SIU_STFIFO, siu_read32(base + SIU_STFIFO) |
-		    (port_info->stfifo & 0x13071307));
-	dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
-		stfifo, stfifo | (port_info->stfifo & 0x13071307));
-
-	return 0;
-}
-
-static void siu_io_work(struct work_struct *work)
-{
-	struct siu_stream *siu_stream = container_of(work, struct siu_stream,
-						     work);
-	struct snd_pcm_substream *substream = siu_stream->substream;
-	struct device *dev = substream->pcm->card->dev;
-	struct snd_pcm_runtime *rt = substream->runtime;
-	struct siu_port *port_info = siu_port_info(substream);
-
-	dev_dbg(dev, "%s: flags %x\n", __func__, siu_stream->rw_flg);
-
-	if (!siu_stream->rw_flg) {
-		dev_dbg(dev, "%s: stream inactive\n", __func__);
-		return;
-	}
-
-	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
-		dma_addr_t buff;
-		size_t count;
-
-		buff = (dma_addr_t)PERIOD_OFFSET(rt->dma_addr,
-						siu_stream->cur_period,
-						siu_stream->period_bytes);
-		count = siu_stream->period_bytes;
-
-		/* DMA transfer start */
-		siu_pcm_rd_set(port_info, buff, count);
-	} else {
-		siu_pcm_wr_set(port_info,
-			       (dma_addr_t)PERIOD_OFFSET(rt->dma_addr,
-						siu_stream->cur_period,
-						siu_stream->period_bytes),
-			       siu_stream->period_bytes);
-	}
-}
-
-/* Capture */
-static int siu_pcm_stmread_start(struct siu_port *port_info)
-{
-	struct siu_stream *siu_stream = &port_info->capture;
-
-	if (siu_stream->xfer_cnt > 0x1000000)
-		return -EINVAL;
-	if (siu_stream->rw_flg)
-		return -EPERM;
-
-	/* Current period in buffer */
-	siu_stream->cur_period = 0;
-
-	/* during stmread flag set */
-	siu_stream->rw_flg = RWF_STM_RD;
-
-	queue_work(system_highpri_wq, &siu_stream->work);
-
-	return 0;
-}
-
-static int siu_pcm_stmread_stop(struct siu_port *port_info)
-{
-	struct siu_info *info = siu_i2s_data;
-	u32 __iomem *base = info->reg;
-	struct siu_stream *siu_stream = &port_info->capture;
-	struct device *dev = siu_stream->substream->pcm->card->dev;
-	u32 stfifo;
-
-	if (!siu_stream->rw_flg)
-		return -EPERM;
-
-	/* input FIFO disable */
-	stfifo = siu_read32(base + SIU_STFIFO);
-	siu_write32(base + SIU_STFIFO, stfifo & ~0x13071307);
-	dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
-		stfifo, stfifo & ~0x13071307);
-
-	/* during stmread flag clear */
-	siu_stream->rw_flg = 0;
-
-	return 0;
-}
-
-static bool filter(struct dma_chan *chan, void *secondary)
-{
-	struct sh_dmae_slave *param = secondary;
-
-	pr_debug("%s: secondary ID %d\n", __func__, param->shdma_slave.slave_id);
-
-	chan->private = &param->shdma_slave;
-	return true;
-}
-
-static int siu_pcm_open(struct snd_soc_component *component,
-			struct snd_pcm_substream *ss)
-{
-	/* Playback / Capture */
-	struct siu_platform *pdata = component->dev->platform_data;
-	struct siu_info *info = siu_i2s_data;
-	struct siu_port *port_info = siu_port_info(ss);
-	struct siu_stream *siu_stream;
-	u32 port = info->port_id;
-	struct device *dev = ss->pcm->card->dev;
-	dma_cap_mask_t mask;
-	struct sh_dmae_slave *param;
-
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-
-	dev_dbg(dev, "%s, port=%d@%p\n", __func__, port, port_info);
-
-	if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		siu_stream = &port_info->playback;
-		param = &siu_stream->param;
-		param->shdma_slave.slave_id = port ? pdata->dma_slave_tx_b :
-			pdata->dma_slave_tx_a;
-	} else {
-		siu_stream = &port_info->capture;
-		param = &siu_stream->param;
-		param->shdma_slave.slave_id = port ? pdata->dma_slave_rx_b :
-			pdata->dma_slave_rx_a;
-	}
-
-	/* Get DMA channel */
-	siu_stream->chan = dma_request_channel(mask, filter, param);
-	if (!siu_stream->chan) {
-		dev_err(dev, "DMA channel allocation failed!\n");
-		return -EBUSY;
-	}
-
-	siu_stream->substream = ss;
-
-	return 0;
-}
-
-static int siu_pcm_close(struct snd_soc_component *component,
-			 struct snd_pcm_substream *ss)
-{
-	struct siu_info *info = siu_i2s_data;
-	struct device *dev = ss->pcm->card->dev;
-	struct siu_port *port_info = siu_port_info(ss);
-	struct siu_stream *siu_stream;
-
-	dev_dbg(dev, "%s: port=%d\n", __func__, info->port_id);
-
-	if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		siu_stream = &port_info->playback;
-	else
-		siu_stream = &port_info->capture;
-
-	dma_release_channel(siu_stream->chan);
-	siu_stream->chan = NULL;
-
-	siu_stream->substream = NULL;
-
-	return 0;
-}
-
-static int siu_pcm_prepare(struct snd_soc_component *component,
-			   struct snd_pcm_substream *ss)
-{
-	struct siu_info *info = siu_i2s_data;
-	struct siu_port *port_info = siu_port_info(ss);
-	struct device *dev = ss->pcm->card->dev;
-	struct snd_pcm_runtime *rt;
-	struct siu_stream *siu_stream;
-	snd_pcm_sframes_t xfer_cnt;
-
-	if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		siu_stream = &port_info->playback;
-	else
-		siu_stream = &port_info->capture;
-
-	rt = siu_stream->substream->runtime;
-
-	siu_stream->buf_bytes = snd_pcm_lib_buffer_bytes(ss);
-	siu_stream->period_bytes = snd_pcm_lib_period_bytes(ss);
-
-	dev_dbg(dev, "%s: port=%d, %d channels, period=%u bytes\n", __func__,
-		info->port_id, rt->channels, siu_stream->period_bytes);
-
-	/* We only support buffers that are multiples of the period */
-	if (siu_stream->buf_bytes % siu_stream->period_bytes) {
-		dev_err(dev, "%s() - buffer=%d not multiple of period=%d\n",
-		       __func__, siu_stream->buf_bytes,
-		       siu_stream->period_bytes);
-		return -EINVAL;
-	}
-
-	xfer_cnt = bytes_to_frames(rt, siu_stream->period_bytes);
-	if (!xfer_cnt || xfer_cnt > 0x1000000)
-		return -EINVAL;
-
-	siu_stream->format = rt->format;
-	siu_stream->xfer_cnt = xfer_cnt;
-
-	dev_dbg(dev, "port=%d buf=%lx buf_bytes=%d period_bytes=%d "
-		"format=%d channels=%d xfer_cnt=%d\n", info->port_id,
-		(unsigned long)rt->dma_addr, siu_stream->buf_bytes,
-		siu_stream->period_bytes,
-		siu_stream->format, rt->channels, (int)xfer_cnt);
-
-	return 0;
-}
-
-static int siu_pcm_trigger(struct snd_soc_component *component,
-			   struct snd_pcm_substream *ss, int cmd)
-{
-	struct siu_info *info = siu_i2s_data;
-	struct device *dev = ss->pcm->card->dev;
-	struct siu_port *port_info = siu_port_info(ss);
-	int ret;
-
-	dev_dbg(dev, "%s: port=%d@%p, cmd=%d\n", __func__,
-		info->port_id, port_info, cmd);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-		if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			ret = siu_pcm_stmwrite_start(port_info);
-		else
-			ret = siu_pcm_stmread_start(port_info);
-
-		if (ret < 0)
-			dev_warn(dev, "%s: start failed on port=%d\n",
-				 __func__, info->port_id);
-
-		break;
-	case SNDRV_PCM_TRIGGER_STOP:
-		if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			siu_pcm_stmwrite_stop(port_info);
-		else
-			siu_pcm_stmread_stop(port_info);
-		ret = 0;
-
-		break;
-	default:
-		dev_err(dev, "%s() unsupported cmd=%d\n", __func__, cmd);
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-/*
- * So far only resolution of one period is supported, subject to extending the
- * dmangine API
- */
-static snd_pcm_uframes_t
-siu_pcm_pointer_dma(struct snd_soc_component *component,
-		    struct snd_pcm_substream *ss)
-{
-	struct device *dev = ss->pcm->card->dev;
-	struct siu_info *info = siu_i2s_data;
-	u32 __iomem *base = info->reg;
-	struct siu_port *port_info = siu_port_info(ss);
-	struct snd_pcm_runtime *rt = ss->runtime;
-	size_t ptr;
-	struct siu_stream *siu_stream;
-
-	if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		siu_stream = &port_info->playback;
-	else
-		siu_stream = &port_info->capture;
-
-	/*
-	 * ptr is the offset into the buffer where the dma is currently at. We
-	 * check if the dma buffer has just wrapped.
-	 */
-	ptr = PERIOD_OFFSET(rt->dma_addr,
-			    siu_stream->cur_period,
-			    siu_stream->period_bytes) - rt->dma_addr;
-
-	dev_dbg(dev,
-		"%s: port=%d, events %x, FSTS %x, xferred %u/%u, cookie %d\n",
-		__func__, info->port_id, siu_read32(base + SIU_EVNTC),
-		siu_read32(base + SIU_SBFSTS), ptr, siu_stream->buf_bytes,
-		siu_stream->cookie);
-
-	if (ptr >= siu_stream->buf_bytes)
-		ptr = 0;
-
-	return bytes_to_frames(ss->runtime, ptr);
-}
-
-static int siu_pcm_new(struct snd_soc_component *component,
-		       struct snd_soc_pcm_runtime *rtd)
-{
-	/* card->dev == socdev->dev, see snd_soc_new_pcms() */
-	struct snd_card *card = rtd->card->snd_card;
-	struct snd_pcm *pcm = rtd->pcm;
-	struct siu_info *info = siu_i2s_data;
-	struct platform_device *pdev = to_platform_device(card->dev);
-	int ret;
-	int i;
-
-	/* pdev->id selects between SIUA and SIUB */
-	if (pdev->id < 0 || pdev->id >= SIU_PORT_NUM)
-		return -EINVAL;
-
-	info->port_id = pdev->id;
-
-	/*
-	 * While the siu has 2 ports, only one port can be on at a time (only 1
-	 * SPB). So far all the boards using the siu had only one of the ports
-	 * wired to a codec. To simplify things, we only register one port with
-	 * alsa. In case both ports are needed, it should be changed here
-	 */
-	for (i = pdev->id; i < pdev->id + 1; i++) {
-		struct siu_port **port_info = &siu_ports[i];
-
-		ret = siu_init_port(i, port_info, card);
-		if (ret < 0)
-			return ret;
-
-		snd_pcm_set_managed_buffer_all(pcm,
-				SNDRV_DMA_TYPE_DEV, card->dev,
-				SIU_BUFFER_BYTES_MAX, SIU_BUFFER_BYTES_MAX);
-
-		(*port_info)->pcm = pcm;
-
-		/* IO works */
-		INIT_WORK(&(*port_info)->playback.work, siu_io_work);
-		INIT_WORK(&(*port_info)->capture.work, siu_io_work);
-	}
-
-	dev_info(card->dev, "SuperH SIU driver initialized.\n");
-	return 0;
-}
-
-static void siu_pcm_free(struct snd_soc_component *component,
-			 struct snd_pcm *pcm)
-{
-	struct platform_device *pdev = to_platform_device(pcm->card->dev);
-	struct siu_port *port_info = siu_ports[pdev->id];
-
-	cancel_work_sync(&port_info->capture.work);
-	cancel_work_sync(&port_info->playback.work);
-
-	siu_free_port(port_info);
-
-	dev_dbg(pcm->card->dev, "%s\n", __func__);
-}
-
-const struct snd_soc_component_driver siu_component = {
-	.name			= DRV_NAME,
-	.open			= siu_pcm_open,
-	.close			= siu_pcm_close,
-	.prepare		= siu_pcm_prepare,
-	.trigger		= siu_pcm_trigger,
-	.pointer		= siu_pcm_pointer_dma,
-	.pcm_construct		= siu_pcm_new,
-	.pcm_destruct		= siu_pcm_free,
-	.legacy_dai_naming	= 1,
-};
-EXPORT_SYMBOL_GPL(siu_component);
diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c
deleted file mode 100644
index 96cf523c227343..00000000000000
--- a/sound/soc/sh/ssi.c
+++ /dev/null
@@ -1,403 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-//
-// Serial Sound Interface (I2S) support for SH7760/SH7780
-//
-// Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// dont forget to set IPSEL/OMSEL register bits (in your board code) to
-// enable SSI output pins!
-
-/*
- * LIMITATIONS:
- *	The SSI unit has only one physical data line, so full duplex is
- *	impossible.  This can be remedied  on the  SH7760 by  using the
- *	other SSI unit for recording; however the SH7780 has only 1 SSI
- *	unit, and its pins are shared with the AC97 unit,  among others.
- *
- * FEATURES:
- *	The SSI features "compressed mode": in this mode it continuously
- *	streams PCM data over the I2S lines and uses LRCK as a handshake
- *	signal.  Can be used to send compressed data (AC3/DTS) to a DSP.
- *	The number of bits sent over the wire in a frame can be adjusted
- *	and can be independent from the actual sample bit depth. This is
- *	useful to support TDM mode codecs like the AD1939 which have a
- *	fixed TDM slot size, regardless of sample resolution.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-#include <asm/io.h>
-
-#define SSICR	0x00
-#define SSISR	0x04
-
-#define CR_DMAEN	(1 << 28)
-#define CR_CHNL_SHIFT	22
-#define CR_CHNL_MASK	(3 << CR_CHNL_SHIFT)
-#define CR_DWL_SHIFT	19
-#define CR_DWL_MASK	(7 << CR_DWL_SHIFT)
-#define CR_SWL_SHIFT	16
-#define CR_SWL_MASK	(7 << CR_SWL_SHIFT)
-#define CR_SCK_MASTER	(1 << 15)	/* bitclock master bit */
-#define CR_SWS_MASTER	(1 << 14)	/* wordselect master bit */
-#define CR_SCKP		(1 << 13)	/* I2Sclock polarity */
-#define CR_SWSP		(1 << 12)	/* LRCK polarity */
-#define CR_SPDP		(1 << 11)
-#define CR_SDTA		(1 << 10)	/* i2s alignment (msb/lsb) */
-#define CR_PDTA		(1 << 9)	/* fifo data alignment */
-#define CR_DEL		(1 << 8)	/* delay data by 1 i2sclk */
-#define CR_BREN		(1 << 7)	/* clock gating in burst mode */
-#define CR_CKDIV_SHIFT	4
-#define CR_CKDIV_MASK	(7 << CR_CKDIV_SHIFT)	/* bitclock divider */
-#define CR_MUTE		(1 << 3)	/* SSI mute */
-#define CR_CPEN		(1 << 2)	/* compressed mode */
-#define CR_TRMD		(1 << 1)	/* transmit/receive select */
-#define CR_EN		(1 << 0)	/* enable SSI */
-
-#define SSIREG(reg)	(*(unsigned long *)(ssi->mmio + (reg)))
-
-struct ssi_priv {
-	unsigned long mmio;
-	unsigned long sysclk;
-	int inuse;
-} ssi_cpu_data[] = {
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
-	{
-		.mmio	= 0xFE680000,
-	},
-	{
-		.mmio	= 0xFE690000,
-	},
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
-	{
-		.mmio	= 0xFFE70000,
-	},
-#else
-#error "Unsupported SuperH SoC"
-#endif
-};
-
-/*
- * track usage of the SSI; it is simplex-only so prevent attempts of
- * concurrent playback + capture. FIXME: any locking required?
- */
-static int ssi_startup(struct snd_pcm_substream *substream,
-		       struct snd_soc_dai *dai)
-{
-	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-	if (ssi->inuse) {
-		pr_debug("ssi: already in use!\n");
-		return -EBUSY;
-	} else
-		ssi->inuse = 1;
-	return 0;
-}
-
-static void ssi_shutdown(struct snd_pcm_substream *substream,
-			 struct snd_soc_dai *dai)
-{
-	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-
-	ssi->inuse = 0;
-}
-
-static int ssi_trigger(struct snd_pcm_substream *substream, int cmd,
-		       struct snd_soc_dai *dai)
-{
-	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-		SSIREG(SSICR) |= CR_DMAEN | CR_EN;
-		break;
-	case SNDRV_PCM_TRIGGER_STOP:
-		SSIREG(SSICR) &= ~(CR_DMAEN | CR_EN);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int ssi_hw_params(struct snd_pcm_substream *substream,
-			 struct snd_pcm_hw_params *params,
-			 struct snd_soc_dai *dai)
-{
-	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-	unsigned long ssicr = SSIREG(SSICR);
-	unsigned int bits, channels, swl, recv, i;
-
-	channels = params_channels(params);
-	bits = params->msbits;
-	recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
-
-	pr_debug("ssi_hw_params() enter\nssicr was    %08lx\n", ssicr);
-	pr_debug("bits: %u channels: %u\n", bits, channels);
-
-	ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
-		   CR_SWL_MASK);
-
-	/* direction (send/receive) */
-	if (!recv)
-		ssicr |= CR_TRMD;	/* transmit */
-
-	/* channels */
-	if ((channels < 2) || (channels > 8) || (channels & 1)) {
-		pr_debug("ssi: invalid number of channels\n");
-		return -EINVAL;
-	}
-	ssicr |= ((channels >> 1) - 1) << CR_CHNL_SHIFT;
-
-	/* DATA WORD LENGTH (DWL): databits in audio sample */
-	i = 0;
-	switch (bits) {
-	case 32: ++i;
-	case 24: ++i;
-	case 22: ++i;
-	case 20: ++i;
-	case 18: ++i;
-	case 16: ++i;
-		 ssicr |= i << CR_DWL_SHIFT;
-	case 8:	 break;
-	default:
-		pr_debug("ssi: invalid sample width\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * SYSTEM WORD LENGTH: size in bits of half a frame over the I2S
-	 * wires. This is usually bits_per_sample x channels/2;  i.e. in
-	 * Stereo mode  the SWL equals DWL.  SWL can  be bigger than the
-	 * product of (channels_per_slot x samplebits), e.g.  for codecs
-	 * like the AD1939 which  only accept 32bit wide TDM slots.  For
-	 * "standard" I2S operation we set SWL = chans / 2 * DWL here.
-	 * Waiting for ASoC to get TDM support ;-)
-	 */
-	if ((bits > 16) && (bits <= 24)) {
-		bits = 24;	/* these are padded by the SSI */
-		/*ssicr |= CR_PDTA;*/ /* cpu/data endianness ? */
-	}
-	i = 0;
-	swl = (bits * channels) / 2;
-	switch (swl) {
-	case 256: ++i;
-	case 128: ++i;
-	case 64:  ++i;
-	case 48:  ++i;
-	case 32:  ++i;
-	case 16:  ++i;
-		  ssicr |= i << CR_SWL_SHIFT;
-	case 8:   break;
-	default:
-		pr_debug("ssi: invalid system word length computed\n");
-		return -EINVAL;
-	}
-
-	SSIREG(SSICR) = ssicr;
-
-	pr_debug("ssi_hw_params() leave\nssicr is now %08lx\n", ssicr);
-	return 0;
-}
-
-static int ssi_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
-			  unsigned int freq, int dir)
-{
-	struct ssi_priv *ssi = &ssi_cpu_data[cpu_dai->id];
-
-	ssi->sysclk = freq;
-
-	return 0;
-}
-
-/*
- * This divider is used to generate the SSI_SCK (I2S bitclock) from the
- * clock at the HAC_BIT_CLK ("oversampling clock") pin.
- */
-static int ssi_set_clkdiv(struct snd_soc_dai *dai, int did, int div)
-{
-	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-	unsigned long ssicr;
-	int i;
-
-	i = 0;
-	ssicr = SSIREG(SSICR) & ~CR_CKDIV_MASK;
-	switch (div) {
-	case 16: ++i;
-	case 8:  ++i;
-	case 4:  ++i;
-	case 2:  ++i;
-		 SSIREG(SSICR) = ssicr | (i << CR_CKDIV_SHIFT);
-	case 1:  break;
-	default:
-		pr_debug("ssi: invalid sck divider %d\n", div);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int ssi_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-{
-	struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-	unsigned long ssicr = SSIREG(SSICR);
-
-	pr_debug("ssi_set_fmt()\nssicr was    0x%08lx\n", ssicr);
-
-	ssicr &= ~(CR_DEL | CR_PDTA | CR_BREN | CR_SWSP | CR_SCKP |
-		   CR_SWS_MASTER | CR_SCK_MASTER);
-
-	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-	case SND_SOC_DAIFMT_I2S:
-		break;
-	case SND_SOC_DAIFMT_RIGHT_J:
-		ssicr |= CR_DEL | CR_PDTA;
-		break;
-	case SND_SOC_DAIFMT_LEFT_J:
-		ssicr |= CR_DEL;
-		break;
-	default:
-		pr_debug("ssi: unsupported format\n");
-		return -EINVAL;
-	}
-
-	switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
-	case SND_SOC_DAIFMT_CONT:
-		break;
-	case SND_SOC_DAIFMT_GATED:
-		ssicr |= CR_BREN;
-		break;
-	}
-
-	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-	case SND_SOC_DAIFMT_NB_NF:
-		ssicr |= CR_SCKP;	/* sample data at low clkedge */
-		break;
-	case SND_SOC_DAIFMT_NB_IF:
-		ssicr |= CR_SCKP | CR_SWSP;
-		break;
-	case SND_SOC_DAIFMT_IB_NF:
-		break;
-	case SND_SOC_DAIFMT_IB_IF:
-		ssicr |= CR_SWSP;	/* word select starts low */
-		break;
-	default:
-		pr_debug("ssi: invalid inversion\n");
-		return -EINVAL;
-	}
-
-	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
-	case SND_SOC_DAIFMT_BC_FC:
-		break;
-	case SND_SOC_DAIFMT_BP_FC:
-		ssicr |= CR_SCK_MASTER;
-		break;
-	case SND_SOC_DAIFMT_BC_FP:
-		ssicr |= CR_SWS_MASTER;
-		break;
-	case SND_SOC_DAIFMT_BP_FP:
-		ssicr |= CR_SWS_MASTER | CR_SCK_MASTER;
-		break;
-	default:
-		pr_debug("ssi: invalid master/secondary configuration\n");
-		return -EINVAL;
-	}
-
-	SSIREG(SSICR) = ssicr;
-	pr_debug("ssi_set_fmt() leave\nssicr is now 0x%08lx\n", ssicr);
-
-	return 0;
-}
-
-/* the SSI depends on an external clocksource (at HAC_BIT_CLK) even in
- * Master mode,  so really this is board specific;  the SSI can do any
- * rate with the right bitclk and divider settings.
- */
-#define SSI_RATES	\
-	SNDRV_PCM_RATE_8000_192000
-
-/* the SSI can do 8-32 bit samples, with 8 possible channels */
-#define SSI_FMTS	\
-	(SNDRV_PCM_FMTBIT_S8      | SNDRV_PCM_FMTBIT_U8      |	\
-	 SNDRV_PCM_FMTBIT_S16_LE  | SNDRV_PCM_FMTBIT_U16_LE  |	\
-	 SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE |	\
-	 SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE |	\
-	 SNDRV_PCM_FMTBIT_S32_LE  | SNDRV_PCM_FMTBIT_U32_LE)
-
-static const struct snd_soc_dai_ops ssi_dai_ops = {
-	.startup	= ssi_startup,
-	.shutdown	= ssi_shutdown,
-	.trigger	= ssi_trigger,
-	.hw_params	= ssi_hw_params,
-	.set_sysclk	= ssi_set_sysclk,
-	.set_clkdiv	= ssi_set_clkdiv,
-	.set_fmt	= ssi_set_fmt,
-};
-
-static struct snd_soc_dai_driver sh4_ssi_dai[] = {
-{
-	.name			= "ssi-dai.0",
-	.playback = {
-		.rates		= SSI_RATES,
-		.formats	= SSI_FMTS,
-		.channels_min	= 2,
-		.channels_max	= 8,
-	},
-	.capture = {
-		.rates		= SSI_RATES,
-		.formats	= SSI_FMTS,
-		.channels_min	= 2,
-		.channels_max	= 8,
-	},
-	.ops = &ssi_dai_ops,
-},
-#ifdef CONFIG_CPU_SUBTYPE_SH7760
-{
-	.name			= "ssi-dai.1",
-	.playback = {
-		.rates		= SSI_RATES,
-		.formats	= SSI_FMTS,
-		.channels_min	= 2,
-		.channels_max	= 8,
-	},
-	.capture = {
-		.rates		= SSI_RATES,
-		.formats	= SSI_FMTS,
-		.channels_min	= 2,
-		.channels_max	= 8,
-	},
-	.ops = &ssi_dai_ops,
-},
-#endif
-};
-
-static const struct snd_soc_component_driver sh4_ssi_component = {
-	.name			= "sh4-ssi",
-	.legacy_dai_naming	= 1,
-};
-
-static int sh4_soc_dai_probe(struct platform_device *pdev)
-{
-	return devm_snd_soc_register_component(&pdev->dev, &sh4_ssi_component,
-					       sh4_ssi_dai,
-					       ARRAY_SIZE(sh4_ssi_dai));
-}
-
-static struct platform_driver sh4_ssi_driver = {
-	.driver = {
-			.name = "sh4-ssi-dai",
-	},
-
-	.probe = sh4_soc_dai_probe,
-};
-
-module_platform_driver(sh4_ssi_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");