@@ -143,22 +143,8 @@
#define PERST_DELAY_US 1000
-#define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
-#define QCOM_PCIE_2_1_0_MAX_CLOCKS 5
-
#define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0))
-struct qcom_pcie_resources_2_1_0 {
- struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS];
- struct reset_control *pci_reset;
- struct reset_control *axi_reset;
- struct reset_control *ahb_reset;
- struct reset_control *por_reset;
- struct reset_control *phy_reset;
- struct reset_control *ext_reset;
- struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY];
-};
-
struct qcom_pcie_resources_1_0_0 {
struct clk *iface;
struct clk *aux;
@@ -168,6 +154,16 @@ struct qcom_pcie_resources_1_0_0 {
struct regulator *vdda;
};
+#define QCOM_PCIE_2_1_0_MAX_CLOCKS 5
+#define QCOM_PCIE_2_1_0_MAX_RESETS 6
+#define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
+struct qcom_pcie_resources_2_1_0 {
+ struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS];
+ struct reset_control_bulk_data resets[QCOM_PCIE_2_1_0_MAX_RESETS];
+ int num_resets;
+ struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY];
+};
+
#define QCOM_PCIE_2_3_2_MAX_SUPPLY 2
struct qcom_pcie_resources_2_3_2 {
struct clk *aux_clk;
@@ -295,6 +291,7 @@ static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
+ bool is_apq = of_device_is_compatible(dev->of_node, "qcom,pcie-apq8064");
int ret;
res->supplies[0].supply = "vdda";
@@ -321,28 +318,20 @@ static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
if (ret < 0)
return ret;
- res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
- if (IS_ERR(res->pci_reset))
- return PTR_ERR(res->pci_reset);
-
- res->axi_reset = devm_reset_control_get_exclusive(dev, "axi");
- if (IS_ERR(res->axi_reset))
- return PTR_ERR(res->axi_reset);
-
- res->ahb_reset = devm_reset_control_get_exclusive(dev, "ahb");
- if (IS_ERR(res->ahb_reset))
- return PTR_ERR(res->ahb_reset);
+ res->resets[0].id = "pci";
+ res->resets[1].id = "axi";
+ res->resets[2].id = "ahb";
+ res->resets[3].id = "por";
+ res->resets[4].id = "phy";
+ res->resets[5].id = "ext";
- res->por_reset = devm_reset_control_get_exclusive(dev, "por");
- if (IS_ERR(res->por_reset))
- return PTR_ERR(res->por_reset);
-
- res->ext_reset = devm_reset_control_get_optional_exclusive(dev, "ext");
- if (IS_ERR(res->ext_reset))
- return PTR_ERR(res->ext_reset);
+ /* ext is optional on APQ8016 */
+ res->num_resets = is_apq ? 5 : 6;
+ ret = devm_reset_control_bulk_get_exclusive(dev, res->num_resets, res->resets);
+ if (ret < 0)
+ return ret;
- res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
- return PTR_ERR_OR_ZERO(res->phy_reset);
+ return 0;
}
static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie)
@@ -350,12 +339,7 @@ static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
- reset_control_assert(res->pci_reset);
- reset_control_assert(res->axi_reset);
- reset_control_assert(res->ahb_reset);
- reset_control_assert(res->por_reset);
- reset_control_assert(res->ext_reset);
- reset_control_assert(res->phy_reset);
+ reset_control_bulk_assert(res->num_resets, res->resets);
writel(1, pcie->parf + PARF_PHY_CTRL);
@@ -370,12 +354,11 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
int ret;
/* reset the PCIe interface as uboot can leave it undefined state */
- reset_control_assert(res->pci_reset);
- reset_control_assert(res->axi_reset);
- reset_control_assert(res->ahb_reset);
- reset_control_assert(res->por_reset);
- reset_control_assert(res->ext_reset);
- reset_control_assert(res->phy_reset);
+ ret = reset_control_bulk_assert(res->num_resets, res->resets);
+ if (ret < 0) {
+ dev_err(dev, "cannot assert resets\n");
+ return ret;
+ }
ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies);
if (ret < 0) {
@@ -383,58 +366,14 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
return ret;
}
- ret = reset_control_deassert(res->ahb_reset);
- if (ret) {
- dev_err(dev, "cannot deassert ahb reset\n");
- goto err_deassert_ahb;
- }
-
- ret = reset_control_deassert(res->ext_reset);
- if (ret) {
- dev_err(dev, "cannot deassert ext reset\n");
- goto err_deassert_ext;
- }
-
- ret = reset_control_deassert(res->phy_reset);
- if (ret) {
- dev_err(dev, "cannot deassert phy reset\n");
- goto err_deassert_phy;
- }
-
- ret = reset_control_deassert(res->pci_reset);
- if (ret) {
- dev_err(dev, "cannot deassert pci reset\n");
- goto err_deassert_pci;
- }
-
- ret = reset_control_deassert(res->por_reset);
- if (ret) {
- dev_err(dev, "cannot deassert por reset\n");
- goto err_deassert_por;
- }
-
- ret = reset_control_deassert(res->axi_reset);
- if (ret) {
- dev_err(dev, "cannot deassert axi reset\n");
- goto err_deassert_axi;
+ ret = reset_control_bulk_deassert(res->num_resets, res->resets);
+ if (ret < 0) {
+ dev_err(dev, "cannot deassert resets\n");
+ regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
+ return ret;
}
return 0;
-
-err_deassert_axi:
- reset_control_assert(res->por_reset);
-err_deassert_por:
- reset_control_assert(res->pci_reset);
-err_deassert_pci:
- reset_control_assert(res->phy_reset);
-err_deassert_phy:
- reset_control_assert(res->ext_reset);
-err_deassert_ext:
- reset_control_assert(res->ahb_reset);
-err_deassert_ahb:
- regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-
- return ret;
}
static int qcom_pcie_post_init_2_1_0(struct qcom_pcie *pcie)
All the resets are asserted and deasserted at the same time. So the bulk reset APIs can be used to handle them together. This simplifies the code a lot. While at it, let's also move the qcom_pcie_resources_2_1_0 struct below qcom_pcie_resources_1_0_0 to keep it sorted. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- drivers/pci/controller/dwc/pcie-qcom.c | 129 +++++++------------------ 1 file changed, 34 insertions(+), 95 deletions(-)