diff mbox series

[net-next,v5,11/15] dt-bindings: net: dsa: qca8k: add LEDs definition example

Message ID 20230319191814.22067-12-ansuelsmth@gmail.com
State Superseded
Headers show
Series [net-next,v5,01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header | expand

Commit Message

Christian Marangi March 19, 2023, 7:18 p.m. UTC
Add LEDs definition example for qca8k Switch Family to describe how they
should be defined for a correct usage.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

Comments

Rob Herring March 21, 2023, 9:27 p.m. UTC | #1
On Sun, Mar 19, 2023 at 08:18:10PM +0100, Christian Marangi wrote:
> Add LEDs definition example for qca8k Switch Family to describe how they
> should be defined for a correct usage.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>  .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> index 389892592aac..2e9c14af0223 100644
> --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> @@ -18,6 +18,8 @@ description:
>    PHY it is connected to. In this config, an internal mdio-bus is registered and
>    the MDIO master is used for communication. Mixed external and internal
>    mdio-bus configurations are not supported by the hardware.
> +  Each phy has at least 3 LEDs connected and can be declared
> +  using the standard LEDs structure.
>  
>  properties:
>    compatible:
> @@ -117,6 +119,7 @@ unevaluatedProperties: false
>  examples:
>    - |
>      #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/leds/common.h>
>  
>      mdio {
>          #address-cells = <1>;
> @@ -226,6 +229,27 @@ examples:
>                      label = "lan1";
>                      phy-mode = "internal";
>                      phy-handle = <&internal_phy_port1>;
> +
> +                    leds {
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +
> +                        led@0 {
> +                            reg = <0>;

Once 'unevaluatedProperties' is properly implemented in the schema, this 
will be a warning. You didn't define 'reg' in the schema.

> +                            color = <LED_COLOR_ID_WHITE>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;
> +                            default-state = "keep";
> +                        };
> +
> +                        led@1 {
> +                            reg = <1>;
> +                            color = <LED_COLOR_ID_AMBER>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;
> +                            default-state = "keep";
> +                        };
> +                    };
>                  };
>  
>                  port@2 {
> -- 
> 2.39.2
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 389892592aac..2e9c14af0223 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -18,6 +18,8 @@  description:
   PHY it is connected to. In this config, an internal mdio-bus is registered and
   the MDIO master is used for communication. Mixed external and internal
   mdio-bus configurations are not supported by the hardware.
+  Each phy has at least 3 LEDs connected and can be declared
+  using the standard LEDs structure.
 
 properties:
   compatible:
@@ -117,6 +119,7 @@  unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
 
     mdio {
         #address-cells = <1>;
@@ -226,6 +229,27 @@  examples:
                     label = "lan1";
                     phy-mode = "internal";
                     phy-handle = <&internal_phy_port1>;
+
+                    leds {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        led@0 {
+                            reg = <0>;
+                            color = <LED_COLOR_ID_WHITE>;
+                            function = LED_FUNCTION_LAN;
+                            function-enumerator = <1>;
+                            default-state = "keep";
+                        };
+
+                        led@1 {
+                            reg = <1>;
+                            color = <LED_COLOR_ID_AMBER>;
+                            function = LED_FUNCTION_LAN;
+                            function-enumerator = <1>;
+                            default-state = "keep";
+                        };
+                    };
                 };
 
                 port@2 {