From patchwork Mon Mar 20 22:16:12 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrew Halaney X-Patchwork-Id: 665297 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D5281C6FD1C for ; Mon, 20 Mar 2023 22:19:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229983AbjCTWTP (ORCPT ); Mon, 20 Mar 2023 18:19:15 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43072 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229892AbjCTWSe (ORCPT ); Mon, 20 Mar 2023 18:18:34 -0400 Received: from us-smtp-delivery-124.mimecast.com (us-smtp-delivery-124.mimecast.com [170.10.133.124]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 987883524B for ; Mon, 20 Mar 2023 15:17:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=redhat.com; s=mimecast20190719; t=1679350623; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=G3diaV/qntELGZ823vxrRn9vLXA3Ahnarug2JpMiyJo=; b=Y7/vEewqfHByE5C/YoH2neSY6d+xOdSSMJLZdW/YAPh0XDKauGpKFb9WiCZLl0JN7rOpR2 eC2ntoWBc9CYJhLCgdCDX5040L30quBCYs44CrC4TMtoLAmMgW/Bhe6U+rSDlEkg9H2UtT r0jR02wB335A3niTO/pkx2tlSa2wGOI= Received: from mail-oo1-f71.google.com (mail-oo1-f71.google.com [209.85.161.71]) by relay.mimecast.com with ESMTP with STARTTLS (version=TLSv1.3, cipher=TLS_AES_256_GCM_SHA384) id us-mta-568-C4tKIAwNOO-GJ7chqf9mBA-1; Mon, 20 Mar 2023 18:17:02 -0400 X-MC-Unique: C4tKIAwNOO-GJ7chqf9mBA-1 Received: by mail-oo1-f71.google.com with SMTP id x19-20020a4a4113000000b0053b4ee58e0fso630607ooa.17 for ; Mon, 20 Mar 2023 15:17:02 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1679350622; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=G3diaV/qntELGZ823vxrRn9vLXA3Ahnarug2JpMiyJo=; b=GtkoTwysfZIB4hI6Q+1CFMy4vO3AXVU0FMW2Wr8eby2nDT5NIJsMOUOvkZIsB0euJS 4V0N+tdchEULuxDgOB6E66wwLAATpgl4k33CT5T9X8Dx/1cFDoFiivW7/MgI8wo3PnoC MFjxGZ31QDEXdhQ6Qal7fxT0T7lhZTeCfqi0CmY9s9q12TenA2AdR6cyu4q5jSVgDv9l 3Y6FVWm1zxiLmUMKBumAcWh0UzSuLddP0K8VFvKOd3LiyanMUacfpn5x8LuGOL7h06ov qj12zD+I+GQeAAU4RKNvnk6a3MkwSfKlv8NKx8K8BU2vEqEKrwZQ+uMJmotq2MskBv1Z v+rw== X-Gm-Message-State: AO0yUKVd9ew+NSix/Bzhv4iPx7bmrHzcqcIDFvWApWBRFfq18sRclUYM 3eV5D+wSf8bQaG3vdUfQ8FPhCMp7MYYxl7kPD2Z96nxNtXXevH2hxTlqOlh0vPVAyxACnp4WOxt Vb1wgvFGzd/bgbreQ6T4xIw== X-Received: by 2002:a4a:5293:0:b0:525:29fa:a287 with SMTP id d141-20020a4a5293000000b0052529faa287mr595282oob.5.1679350621845; Mon, 20 Mar 2023 15:17:01 -0700 (PDT) X-Google-Smtp-Source: AK7set+lKWt5P4iyXda3ft4Vh3BH6Jt4rxJ7YszOgdHo4c2/OqbLuICyQp33x8Cph5fPIxboIt/mGw== X-Received: by 2002:a4a:5293:0:b0:525:29fa:a287 with SMTP id d141-20020a4a5293000000b0052529faa287mr595263oob.5.1679350621631; Mon, 20 Mar 2023 15:17:01 -0700 (PDT) Received: from halaney-x13s.redhat.com (104-53-165-62.lightspeed.stlsmo.sbcglobal.net. [104.53.165.62]) by smtp.gmail.com with ESMTPSA id q204-20020a4a33d5000000b0053853156b5csm4092465ooq.8.2023.03.20.15.16.59 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 20 Mar 2023 15:17:01 -0700 (PDT) From: Andrew Halaney To: linux-kernel@vger.kernel.org Cc: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, davem@davemloft.net, edumazet@google.com, kuba@kernel.org, pabeni@redhat.com, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, vkoul@kernel.org, bhupesh.sharma@linaro.org, mturquette@baylibre.com, sboyd@kernel.org, peppe.cavallaro@st.com, alexandre.torgue@foss.st.com, joabreu@synopsys.com, mcoquelin.stm32@gmail.com, richardcochran@gmail.com, linux@armlinux.org.uk, veekhee@apple.com, tee.min.tan@linux.intel.com, mohammad.athari.ismail@intel.com, jonathanh@nvidia.com, ruppala@nvidia.com, bmasney@redhat.com, andrey.konovalov@linaro.org, linux-arm-msm@vger.kernel.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-clk@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, ncai@quicinc.com, jsuraj@qti.qualcomm.com, hisunil@quicinc.com, echanude@redhat.com, Andrew Halaney Subject: [PATCH net-next v2 07/12] arm64: dts: qcom: sa8540p-ride: Add ethernet nodes Date: Mon, 20 Mar 2023 17:16:12 -0500 Message-Id: <20230320221617.236323-8-ahalaney@redhat.com> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20230320221617.236323-1-ahalaney@redhat.com> References: <20230320221617.236323-1-ahalaney@redhat.com> MIME-Version: 1.0 Content-type: text/plain Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Enable both the MACs found on the board. ethernet0 and ethernet1 both ultimately go to a series of on board switches which aren't managed by this processor. ethernet0 is connected to a Marvell 88EA1512 phy via RGMII. That goes to the series of switches via SGMII on the "media" side of the phy. RGMII_SGMII mode is enabled via devicetree register descriptions. The switch on the "media" side has auto-negotiation disabled, so configuration from userspace similar to: ethtool -s eth0 autoneg off speed 1000 duplex full is necessary to get traffic flowing on that interface. ethernet1 is in a mac2mac/fixed-link configuration going to the same series of switches directly via RGMII. Signed-off-by: Andrew Halaney --- Changes since v1: * None arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 181 ++++++++++++++++++++++ 1 file changed, 181 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index 8b7555f22528..b874f3909382 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -28,6 +28,65 @@ aliases { chosen { stdout-path = "serial0:115200n8"; }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; }; &apps_rsc { @@ -151,6 +210,68 @@ vreg_l8g: ldo8 { }; }; +ðernet0 { + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + max-speed = <1000>; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_default>; + + status = "okay"; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + + compatible = "snps,dwmac-mdio"; + + /* Marvell 88EA1512 */ + rgmii_phy: phy@8 { + reg = <0x8>; + + interrupt-parent = <&tlmm>; + interrupts-extended = <&tlmm 127 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&pmm8540c_gpios 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + + device_type = "ethernet-phy"; + + /* Set to RGMII_SGMII mode and soft reset. Turn off auto-negotiation + * from userspace to talk to the switch on the SGMII side of things + */ + marvell,reg-init = + /* Set MODE[2:0] to RGMII_SGMII */ + <0x12 0x14 0xfff8 0x4>, + /* Soft reset required after changing MODE[2:0] */ + <0x12 0x14 0x7fff 0x8000>; + }; + }; +}; + +ðernet1 { + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + max-speed = <1000>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet1_default>; + + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_default>; @@ -316,6 +437,66 @@ &xo_board_clk { /* PINCTRL */ &tlmm { + ethernet0_default: ethernet0-default-state { + mdc-pins { + pins = "gpio175"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio176"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio183", "gpio184", "gpio185", "gpio186", "gpio187", "gpio188"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio177", "gpio178", "gpio179", "gpio180", "gpio181", "gpio182"; + function = "rgmii_0"; + drive-strength = <16>; + bias-disable; + }; + }; + + ethernet1_default: ethernet1-default-state { + mdc-pins { + pins = "gpio97"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio98"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104"; + function = "rgmii_1"; + drive-strength = <16>; + bias-disable; + }; + }; + i2c0_default: i2c0-default-state { /* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */ pins = "gpio135", "gpio136";