diff mbox series

[v14,13/15] arm64: dts: ls1088ardb: Remove aquantia interrupt

Message ID 20230413160607.4128315-14-sean.anderson@seco.com
State New
Headers show
Series phy: Add support for Lynx 10G SerDes | expand

Commit Message

Sean Anderson April 13, 2023, 4:06 p.m. UTC
On my board I have never been able to get this interrupt to work. As
such, the link does not come up. To fix this, remove the interrupt,
forcing polling mode. It has been reported that this interrupt works on
other boards. However, switching to polling will only result in a modest
decrease in link up/down delay (.5s on average).

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---

(no changes since v13)

Changes in v13:
- Split interrupt changes off from serdes support

 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 1 -
 1 file changed, 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index ee8e932628d1..391c2b8afa81 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -128,7 +128,6 @@  &emdio2 {
 
 	mdio2_aquantia_phy: ethernet-phy@0 {
 		compatible = "ethernet-phy-ieee802.3-c45";
-		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x0>;
 	};
 };