diff mbox series

[v4,2/3] arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2

Message ID 20230516075908.2323372-3-bhupesh.sharma@linaro.org
State Accepted
Commit 14e6c47b628788a8c8634bc59b2dd50d68a74de3
Headers show
Series arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals | expand

Commit Message

Bhupesh Sharma May 16, 2023, 7:59 a.m. UTC
Card-Detect (CD) gpio for SDHC2 is an active GPIO line. Fix the same.
This allows the uSD card to be properly detected on the board.

Fixes: 8d58a8c0d930 ("arm64: dts: qcom: Add base qrb4210-rb2 board dts")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 504543ad1a1b..abea44fd369d 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -203,7 +203,7 @@  &sdhc_1 {
 };
 
 &sdhc_2 {
-	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */
 
 	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
 	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;