@@ -7,6 +7,7 @@
#include <linux/mfd/core.h>
#include <linux/mfd/stpmic1.h>
#include <linux/module.h>
+#include <linux/reboot.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
@@ -117,6 +118,16 @@ static const struct regmap_irq_chip stpmic1_regmap_irq_chip = {
.num_irqs = ARRAY_SIZE(stpmic1_irqs),
};
+static int stpmic1_power_off(struct sys_off_data *data)
+{
+ struct stpmic1 *ddata = data->cb_data;
+
+ regmap_update_bits(ddata->regmap, MAIN_CR,
+ SOFTWARE_SWITCH_OFF, SOFTWARE_SWITCH_OFF);
+
+ return NOTIFY_DONE;
+}
+
static int stpmic1_probe(struct i2c_client *i2c)
{
struct stpmic1 *ddata;
@@ -159,6 +170,18 @@ static int stpmic1_probe(struct i2c_client *i2c)
return ret;
}
+ if (of_property_read_bool(i2c->dev.of_node, "st,pmic-poweroff")) {
+ ret = devm_register_sys_off_handler(ddata->dev,
+ SYS_OFF_MODE_POWER_OFF,
+ SYS_OFF_PRIO_DEFAULT,
+ stpmic1_power_off,
+ ddata);
+ if (ret) {
+ dev_err(ddata->dev, "failed to register sys-off handler: %d\n", ret);
+ return ret;
+ }
+ }
+
return devm_of_platform_populate(dev);
}
Use devm_register_sys_off_handler() that allows to register multiple power-off handlers. This can be enabled by adding "st,pmic-poweroff" to device-tree. Signed-off-by: Sean Nyekjaer <sean@geanix.com> --- Changes since v1: - Removed superfluous function drivers/mfd/stpmic1.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)