@@ -35,6 +35,7 @@ config CLK_STARFIVE_JH7110_SYS
select AUXILIARY_BUS
select CLK_STARFIVE_JH71X0
select RESET_STARFIVE_JH7110 if RESET_CONTROLLER
+ select CLK_STARFIVE_JH7110_PLL
default ARCH_STARFIVE
help
Say yes here to support the system clock controller on the
@@ -7,6 +7,7 @@
*/
#include <linux/auxiliary_bus.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -386,6 +387,7 @@ EXPORT_SYMBOL_GPL(jh7110_reset_controller_register);
static int __init jh7110_syscrg_probe(struct platform_device *pdev)
{
+ bool use_fixed_pll = true; /* PLL clocks use fixed factor clocks or PLL driver */
struct jh71x0_clk_priv *priv;
unsigned int idx;
int ret;
@@ -402,28 +404,29 @@ static int __init jh7110_syscrg_probe(struct platform_device *pdev)
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
- /*
- * These PLL clocks are not actually fixed factor clocks and can be
- * controlled by the syscon registers of JH7110. They will be dropped
- * and registered in the PLL clock driver instead.
- */
+ if (!IS_ERR(devm_clk_get(priv->dev, "pll0_out")))
+ use_fixed_pll = false; /* can get pll clocks from PLL driver */
+
+ /* Use fixed factor clocks if can not get the PLL clocks from DTS */
+ if (use_fixed_pll) {
/* 24MHz -> 1000.0MHz */
- priv->pll[0] = devm_clk_hw_register_fixed_factor(priv->dev, "pll0_out",
- "osc", 0, 125, 3);
- if (IS_ERR(priv->pll[0]))
- return PTR_ERR(priv->pll[0]);
+ priv->pll[0] = devm_clk_hw_register_fixed_factor(priv->dev, "pll0_out",
+ "osc", 0, 125, 3);
+ if (IS_ERR(priv->pll[0]))
+ return PTR_ERR(priv->pll[0]);
/* 24MHz -> 1066.0MHz */
- priv->pll[1] = devm_clk_hw_register_fixed_factor(priv->dev, "pll1_out",
- "osc", 0, 533, 12);
- if (IS_ERR(priv->pll[1]))
- return PTR_ERR(priv->pll[1]);
+ priv->pll[1] = devm_clk_hw_register_fixed_factor(priv->dev, "pll1_out",
+ "osc", 0, 533, 12);
+ if (IS_ERR(priv->pll[1]))
+ return PTR_ERR(priv->pll[1]);
/* 24MHz -> 1188.0MHz */
- priv->pll[2] = devm_clk_hw_register_fixed_factor(priv->dev, "pll2_out",
- "osc", 0, 99, 2);
- if (IS_ERR(priv->pll[2]))
- return PTR_ERR(priv->pll[2]);
+ priv->pll[2] = devm_clk_hw_register_fixed_factor(priv->dev, "pll2_out",
+ "osc", 0, 99, 2);
+ if (IS_ERR(priv->pll[2]))
+ return PTR_ERR(priv->pll[2]);
+ }
for (idx = 0; idx < JH7110_SYSCLK_END; idx++) {
u32 max = jh7110_sysclk_data[idx].max;
@@ -462,8 +465,14 @@ static int __init jh7110_syscrg_probe(struct platform_device *pdev)
parents[i].fw_name = "tdm_ext";
else if (pidx == JH7110_SYSCLK_MCLK_EXT)
parents[i].fw_name = "mclk_ext";
- else
+ else if (use_fixed_pll)
parents[i].hw = priv->pll[pidx - JH7110_SYSCLK_PLL0_OUT];
+ else if (pidx == JH7110_SYSCLK_PLL0_OUT)
+ parents[i].fw_name = "pll0_out";
+ else if (pidx == JH7110_SYSCLK_PLL1_OUT)
+ parents[i].fw_name = "pll1_out";
+ else if (pidx == JH7110_SYSCLK_PLL2_OUT)
+ parents[i].fw_name = "pll2_out";
}
clk->hw.init = &init;
Modify PLL clocks source to be got from DTS or the fixed factor clocks. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> --- drivers/clk/starfive/Kconfig | 1 + .../clk/starfive/clk-starfive-jh7110-sys.c | 45 +++++++++++-------- 2 files changed, 28 insertions(+), 18 deletions(-)