| Message ID | 20230704163848.169853-7-davidwronek@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add initial support for SM7125 and Xiaomi SM7125 platform | expand |
On 4.07.2023 18:31, David Wronek wrote: > Add support for the RTC which is the same as on other PMICs and add the > resin child node to the PM6150 PON device and disable it by default. > > Signed-off-by: David Wronek <davidwronek@gmail.com> > --- > arch/arm64/boot/dts/qcom/pm6150.dtsi | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi > index 2e6afa296141..9a7c532f7a12 100644 > --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi > @@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey { > bias-pull-up; > linux,code = <KEY_POWER>; > }; > + > + pm6150_resin: resin { > + compatible = "qcom,pm8941-resin"; > + interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; 0x0 (GIC_SPI is a property of the ARM GIC, SPMI uses the interrupts field in a rather hacky and specific way) [...] > + rtc@6000 { > + compatible = "qcom,pm8941-rtc"; > + reg = <0x6000>, <0x6100>; > + reg-names = "rtc", "alarm"; > + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; IRQ_TYPE_EDGE_RISING Konrad > + }; > + > pm6150_gpios: gpio@c000 { > compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; > reg = <0xc000>;
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 2e6afa296141..9a7c532f7a12 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey { bias-pull-up; linux,code = <KEY_POWER>; }; + + pm6150_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; }; pm6150_temp: temp-alarm@2400 { @@ -88,6 +96,13 @@ pm6150_adc_tm: adc-tm@3500 { status = "disabled"; }; + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + }; + pm6150_gpios: gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>;
Add support for the RTC which is the same as on other PMICs and add the resin child node to the PM6150 PON device and disable it by default. Signed-off-by: David Wronek <davidwronek@gmail.com> --- arch/arm64/boot/dts/qcom/pm6150.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)