diff mbox series

[v2,2/6] dt-bindings: firmware: arm,scmi: support pinctrl protocol

Message ID 20240104-pinctrl-scmi-v2-2-a9bd86ab5a84@nxp.com
State New
Headers show
Series firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support | expand

Commit Message

Peng Fan (OSS) Jan. 4, 2024, 10:48 a.m. UTC
From: Peng Fan <peng.fan@nxp.com>

Add SCMI v3.2 pinctrl protocol bindings and example.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 .../devicetree/bindings/firmware/arm,scmi.yaml     | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)

Comments

Rob Herring Jan. 9, 2024, 9:18 p.m. UTC | #1
On Thu, 04 Jan 2024 18:48:46 +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Add SCMI v3.2 pinctrl protocol bindings and example.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  .../devicetree/bindings/firmware/arm,scmi.yaml     | 50 ++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 4591523b51a0..bba4a37de6b4 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -247,6 +247,37 @@  properties:
       reg:
         const: 0x18
 
+  protocol@19:
+    type: object
+    allOf:
+      - $ref: '#/$defs/protocol-node'
+      - $ref: /schemas/pinctrl/pinctrl.yaml
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x19
+
+    patternProperties:
+      '-pins$':
+        type: object
+        allOf:
+          - $ref: /schemas/pinctrl/pincfg-node.yaml#
+          - $ref: /schemas/pinctrl/pinmux-node.yaml#
+        unevaluatedProperties: false
+
+        description:
+          A pin multiplexing sub-node describe how to configure a
+          set of pins is some desired function.
+          A single sub-node may define several pin configurations.
+          This sub-node is using default pinctrl bindings to configure
+          pin multiplexing and using SCMI protocol to apply specified
+          configuration using SCMI protocol.
+
+    required:
+      - reg
+
 additionalProperties: false
 
 $defs:
@@ -401,6 +432,25 @@  examples:
             scmi_powercap: protocol@18 {
                 reg = <0x18>;
             };
+
+            scmi_pinctrl: protocol@19 {
+                reg = <0x19>;
+
+                i2c2-pins {
+                    groups = "g_i2c2_a", "g_i2c2_b";
+                    function = "f_i2c2";
+                };
+
+                mdio-pins {
+                    groups = "g_avb_mdio";
+                    drive-strength = <24>;
+                };
+
+                keys_pins: keys-pins {
+                    pins = "gpio_5_17", "gpio_5_20", "gpio_5_22", "gpio_2_1";
+                    bias-pull-up;
+                };
+            };
         };
     };