diff mbox series

[v4,4/8] arm64: dts: exynos: gs101: remove reg-io-width from serial

Message ID 20240119111132.1290455-5-tudor.ambarus@linaro.org
State Accepted
Commit af5c317a93ef168c105bd28afdd675e962244591
Headers show
Series GS101 Oriole: CMU_PERIC0 support and USI updates | expand

Commit Message

Tudor Ambarus Jan. 19, 2024, 11:11 a.m. UTC
Remove the reg-io-width property in order to comply with the bindings.

The entire bus (PERIC) on which the GS101 serial resides only allows
32-bit register accesses. The reg-io-width dt property is disallowed
for the "google,gs101-uart" compatible and instead the iotype is
inferred from the compatible.

Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 1 -
 1 file changed, 1 deletion(-)

Comments

Krzysztof Kozlowski Jan. 22, 2024, 11:15 a.m. UTC | #1
On Fri, 19 Jan 2024 11:11:28 +0000, Tudor Ambarus wrote:
> Remove the reg-io-width property in order to comply with the bindings.
> 
> The entire bus (PERIC) on which the GS101 serial resides only allows
> 32-bit register accesses. The reg-io-width dt property is disallowed
> for the "google,gs101-uart" compatible and instead the iotype is
> inferred from the compatible.
> 
> [...]

Applied, thanks!

[4/8] arm64: dts: exynos: gs101: remove reg-io-width from serial
      https://git.kernel.org/krzk/linux/c/daff9d192892ea583284eb116a07e8e0086f0e76

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index d838e3a7af6e..4e5f4c748906 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -366,7 +366,6 @@  usi_uart: usi@10a000c0 {
 			serial_0: serial@10a00000 {
 				compatible = "google,gs101-uart";
 				reg = <0x10a00000 0xc0>;
-				reg-io-width = <4>;
 				interrupts = <GIC_SPI 634
 					      IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&dummy_clk 0>, <&dummy_clk 0>;