diff mbox series

[v2,12/15] arm: dts: msm8974: thermal: Add interrupt support

Message ID 383f16c449fb5a36d07ef98c5b071d9a50a86eb7.1566907161.git.amit.kucheria@linaro.org
State New
Headers show
Series None | expand

Commit Message

Amit Kucheria Aug. 27, 2019, 12:14 p.m. UTC 
Register upper-lower interrupt for the tsens controller.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

Tested-by: Brian Masney <masneyb@onstation.org>

---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 36 +++++++++++++++--------------
 1 file changed, 19 insertions(+), 17 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d32f639505f1b..290f7c3827d45 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -139,8 +139,8 @@ 
 
 	thermal-zones {
 		cpu-thermal0 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -159,8 +159,8 @@ 
 		};
 
 		cpu-thermal1 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 6>;
 
@@ -179,8 +179,8 @@ 
 		};
 
 		cpu-thermal2 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 7>;
 
@@ -199,8 +199,8 @@ 
 		};
 
 		cpu-thermal3 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 8>;
 
@@ -219,8 +219,8 @@ 
 		};
 
 		q6-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 1>;
 
@@ -234,8 +234,8 @@ 
 		};
 
 		modemtx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -250,7 +250,7 @@ 
 
 		video-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <1000>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 3>;
 
@@ -279,8 +279,8 @@ 
 		};
 
 		gpu-thermal-top {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 9>;
 
@@ -294,8 +294,8 @@ 
 		};
 
 		gpu-thermal-bottom {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 10>;
 
@@ -531,6 +531,8 @@ 
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 			nvmem-cell-names = "calib", "calib_backup";
 			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};