From patchwork Mon Dec 26 14:29:22 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Angel Iglesias X-Patchwork-Id: 636871 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9CF13C3DA79 for ; Mon, 26 Dec 2022 14:32:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231165AbiLZOcR (ORCPT ); Mon, 26 Dec 2022 09:32:17 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47558 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231609AbiLZOcN (ORCPT ); Mon, 26 Dec 2022 09:32:13 -0500 Received: from mail-wr1-x434.google.com (mail-wr1-x434.google.com [IPv6:2a00:1450:4864:20::434]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A0265E6B; Mon, 26 Dec 2022 06:32:11 -0800 (PST) Received: by mail-wr1-x434.google.com with SMTP id bs20so8031095wrb.3; Mon, 26 Dec 2022 06:32:11 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=yjMkuu0y8HlvUAKn/mM88SIPu3VaIS/uapetW8Al+Co=; b=IuJabP8/bh5LF/Zvs+6IktgzOm85ByZ/UM0G9M92dw+ZhuuYkEBWIRurl0ab/KjCkX +2CiUNJ/5XTDX15pPYm9uK39UK26js8XYsoewMfzMW8GLveashps5LwO/4vLbehI0fIl 0WFQFPYSm24I/OzYUBnPhXWrcCsxKLC8EakYyL+o0vYwpBsByV97iM1QFKgpLgbgVgqy 4vizV6n4oEMpEuk4p0cqoFPxai1CjEBsoDyiPjYVB4H//i3cx1n3KVVEbHvXRkIAkZi+ fVcEDGcPSfItcr5eppgVpIcOW7SUXjBSFg2jDqslI1r214iVxj2X4DQ8LRrU9elKWgjC /fTw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=yjMkuu0y8HlvUAKn/mM88SIPu3VaIS/uapetW8Al+Co=; b=eV3EHKyedDOk+Jw4f3wv/MNxg8OwiA8V9mpDUn5zFD/8FjTsDHgnh7vuD5Y3FVwd2z CuOyNbJ+NoJKoH5nrx8oztP4desK+oBfX2h+vyWLyKkPXsAAE8HXdhje4U9jhwjHHING DDEr9SH5peW9mTUfri6g7hxgGEcS8PoQ7XjYKyl/J/oLQIplwIC5BMLrAWXJHHc2a96i dYCn+ZfNT8qMUMAVuczVaHHxIkUmw2lCQh66f/X8H/v6oQMYIDkWbw583YdH7D+QEpsW styMt25Tt94YhZDV4QpZ6U3whrm5JJXnLaY8iMiAFuw7HHU2FojD03dZIJosQlXaxXoB IKTA== X-Gm-Message-State: AFqh2koJlmbEMaly25I99IA+GbekRb8DSGNXbW5/fNg7kGxePjv4XuAj U97q6gDXL5zuihORw6nc3VI12pedvjU= X-Google-Smtp-Source: AMrXdXtuFoDZ/0gF8I+nf++Wj/P+7+waZggEZO3GoAjHiZQEmwFw21mWbT+ac0QVBUrHv4/tLV5Ynw== X-Received: by 2002:adf:d22c:0:b0:242:33ed:af28 with SMTP id k12-20020adfd22c000000b0024233edaf28mr11784266wrh.41.1672065129712; Mon, 26 Dec 2022 06:32:09 -0800 (PST) Received: from localhost.localdomain (188.red-83-35-57.dynamicip.rima-tde.net. [83.35.57.188]) by smtp.gmail.com with ESMTPSA id c4-20020a05600c0a4400b003cf75213bb9sm21511754wmq.8.2022.12.26.06.32.08 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 26 Dec 2022 06:32:09 -0800 (PST) From: Angel Iglesias To: linux-iio@vger.kernel.org Cc: Angel Iglesias , Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Krzysztof Kozlowski , Nikita Yushchenko , Andy Shevchenko , Paul Cercueil , Ulf Hansson , "Rafael J. Wysocki" , Andreas Klinger , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 3/5] iio: pressure: bmp280: Add support for new sensor BMP580 Date: Mon, 26 Dec 2022 15:29:22 +0100 Message-Id: X-Mailer: git-send-email 2.39.0 In-Reply-To: References: MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Adds compatibility with the new sensor generation, the BMP580. The measurement and initialization codepaths are adapted from the device datasheet and the repository from manufacturer at https://github.com/boschsensortec/BMP5-Sensor-API. Signed-off-by: Angel Iglesias diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index c9453389e4f7..1c18e3b2c501 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -17,14 +17,14 @@ config ABP060MG will be called abp060mg. config BMP280 - tristate "Bosch Sensortec BMP180/BMP280/BMP380 pressure sensor I2C driver" + tristate "Bosch Sensortec BMP180/BMP280/BMP380/BMP580 pressure sensor I2C driver" depends on (I2C || SPI_MASTER) select REGMAP select BMP280_I2C if (I2C) select BMP280_SPI if (SPI_MASTER) help - Say yes here to build support for Bosch Sensortec BMP180, BMP280 and - BMP380 pressure and temperature sensors. Also supports the BME280 with + Say yes here to build support for Bosch Sensortec BMP180, BMP280, BMP380 + and BMP580 pressure and temperature sensors. Also supports the BME280 with an additional humidity sensor channel. To compile this driver as a module, choose M here: the core module diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index c37cf2caec68..44901c6eb2f9 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -13,6 +13,7 @@ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf + * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf * * Notice: * The link to the bmp180 datasheet points to an outdated version missing these changes: @@ -130,6 +131,41 @@ enum bmp380_odr { BMP380_ODR_0_0015HZ, }; +enum bmp580_odr { + BMP580_ODR_240HZ, + BMP580_ODR_218HZ, + BMP580_ODR_199HZ, + BMP580_ODR_179HZ, + BMP580_ODR_160HZ, + BMP580_ODR_149HZ, + BMP580_ODR_140HZ, + BMP580_ODR_129HZ, + BMP580_ODR_120HZ, + BMP580_ODR_110HZ, + BMP580_ODR_100HZ, + BMP580_ODR_89HZ, + BMP580_ODR_80HZ, + BMP580_ODR_70HZ, + BMP580_ODR_60HZ, + BMP580_ODR_50HZ, + BMP580_ODR_45HZ, + BMP580_ODR_40HZ, + BMP580_ODR_35HZ, + BMP580_ODR_30HZ, + BMP580_ODR_25HZ, + BMP580_ODR_20HZ, + BMP580_ODR_15HZ, + BMP580_ODR_10HZ, + BMP580_ODR_5HZ, + BMP580_ODR_4HZ, + BMP580_ODR_3HZ, + BMP580_ODR_2HZ, + BMP580_ODR_1HZ, + BMP580_ODR_0_5HZ, + BMP580_ODR_0_25HZ, + BMP580_ODR_0_125HZ, +}; + struct bmp280_data { struct device *dev; struct mutex lock; @@ -1361,6 +1397,399 @@ static const struct bmp280_chip_info bmp380_chip_info = { .preinit = bmp380_preinit, }; +enum bmp580_commands { + BMP580_SOFT_RESET_CMD, + BMP580_NVM_WRITE_CMD, + BMP580_NVM_READ_CMD, + BMP580_EXT_MODE_CMD, +}; + +/* + * Helper function to send a command to BMP5XX sensors. + * + * BMP5xx sensors have a series of commands actionable + * writing specific sequences on the CMD register: + * SOFT_RESET: performs a reset of the system. + * NVM_READ: read the contents of a user position of the nvm memory. + * NVM_WRITE: write new data to a user position of the nvm memory. + * EXT_MODE: enable extended mode with additional debug pages. + */ +static int bmp580_cmd(struct bmp280_data *data, enum bmp580_commands cmd) +{ + unsigned long deadline; + unsigned int reg; + int ret; + + switch (cmd) { + case BMP580_SOFT_RESET_CMD: + /* Send reset word */ + ret = regmap_write(data->regmap, BMP580_REG_CMD, BMP580_CMD_SOFT_RESET); + if (ret) { + dev_err(data->dev, "failed to send reset command to device\n"); + return ret; + } + /* Wait 2ms for reset completion */ + usleep_range(2000, 2500); + /* Dummy read of chip_id */ + ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, ®); + if (ret) { + dev_err(data->dev, "failed to reestablish comms after reset\n"); + return ret; + } + /* Check if POR bit is set on interrupt reg */ + ret = regmap_read(data->regmap, BMP580_REG_INT_STATUS, ®); + if (ret) { + dev_err(data->dev, "error reading interrupt status register\n"); + return ret; + } + if (!(reg & BMP580_INT_STATUS_POR_MASK)) { + dev_err(data->dev, "error resetting sensor\n"); + return -EINVAL; + } + break; + case BMP580_NVM_WRITE_CMD: + case BMP580_NVM_READ_CMD: + /* Check nvm ready flag */ + ret = regmap_read(data->regmap, BMP580_REG_STATUS, ®); + if (ret) { + dev_err(data->dev, "failed to check nvm status\n"); + return ret; + } + if (!(reg & BMP580_STATUS_NVM_RDY_MASK)) { + dev_err(data->dev, "sensor's nvm is not ready\n"); + return -EIO; + } + /* Send NVM operation sequence */ + ret = regmap_write(data->regmap, BMP580_REG_CMD, BMP580_CMD_NVM_OP_SEQ_0); + if (ret) { + dev_err(data->dev, "failed to send nvm operation's first sequence\n"); + return ret; + } + if (cmd == BMP580_NVM_WRITE_CMD) { + /* Send write sequence */ + ret = regmap_write(data->regmap, BMP580_REG_CMD, + BMP580_CMD_NVM_WRITE_SEQ_1); + if (ret) { + dev_err(data->dev, "failed to send nvm write sequence\n"); + return ret; + } + /* Datasheet says on 4.8.1.2 it takes approximately 10ms */ + usleep_range(10000, 10500); + deadline = jiffies + msecs_to_jiffies(10); + } else { + /* Send read sequence */ + ret = regmap_write(data->regmap, BMP580_REG_CMD, + BMP580_CMD_NVM_READ_SEQ_1); + if (ret) { + dev_err(data->dev, "failed to send nvm read sequence\n"); + return ret; + } + /* Datasheet says on 4.8.1.1 it takes approximately 200us */ + usleep_range(200, 250); + deadline = jiffies + usecs_to_jiffies(200); + } + if (ret) { + dev_err(data->dev, "failed to write command sequence\n"); + return -EIO; + } + /* Wait until NVM is ready again */ + do { + ret = regmap_read(data->regmap, BMP580_REG_STATUS, ®); + if (ret) { + dev_err(data->dev, "failed to check nvm status\n"); + reg &= ~BMP580_STATUS_NVM_RDY_MASK; + } + } while (time_before(jiffies, deadline) && !(reg & BMP580_STATUS_NVM_RDY_MASK)); + + if (!(reg & BMP580_STATUS_NVM_RDY_MASK)) { + dev_err(data->dev, + "reached timeout waiting for nvm operation completion\n"); + return -ETIMEDOUT; + } + /* Checks nvm error flags */ + if ((reg & BMP580_STATUS_NVM_ERR_MASK) || (reg & BMP580_STATUS_NVM_CMD_ERR_MASK)) { + dev_err(data->dev, "error processing nvm operation\n"); + return -EIO; + } + break; + case BMP580_EXT_MODE_CMD: + ret = regmap_write(data->regmap, BMP580_REG_CMD, BMP580_CMD_EXTMODE_SEQ_0); + if (ret) { + dev_err(data->dev, "failed to send ext_mode first sequence\n"); + return ret; + } + ret = regmap_write(data->regmap, BMP580_REG_CMD, BMP580_CMD_EXTMODE_SEQ_1); + if (ret) { + dev_err(data->dev, "failed to send ext_mode second sequence\n"); + return ret; + } + ret = regmap_write(data->regmap, BMP580_REG_CMD, BMP580_CMD_EXTMODE_SEQ_2); + if (ret) { + dev_err(data->dev, "failed to send ext_mode second sequence\n"); + return ret; + } + break; + } + + return 0; +} + +/* + * Contrary to previous sensors families, compensation algorithm is builtin. + * We are only required to read the register raw data and adapt the ranges + * for what is expected on IIO ABI. + */ + +static int bmp580_read_temp(struct bmp280_data *data, int *val) +{ + s32 raw_temp; + int ret; + + ret = regmap_bulk_read(data->regmap, BMP580_REG_TEMP_XLSB, data->buf, + sizeof(data->buf)); + if (ret) { + dev_err(data->dev, "failed to read temperature\n"); + return ret; + } + + raw_temp = get_unaligned_le24(data->buf); + if (raw_temp == BMP580_TEMP_SKIPPED) { + dev_err(data->dev, "reading temperature skipped\n"); + return -EIO; + } + + /* + * Temperature is returned in Celsius degrees in fractional + * form down 2^16. We reescale by x1000 to return milli Celsius + * to respect IIO ABI. + */ + *val = (raw_temp * 1000) >> 16; + return IIO_VAL_INT; +} + +static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2) +{ + u32 raw_press; + int ret; + + ret = regmap_bulk_read(data->regmap, BMP580_REG_PRESS_XLSB, data->buf, + sizeof(data->buf)); + if (ret) { + dev_err(data->dev, "failed to read pressure\n"); + return ret; + } + + raw_press = get_unaligned_le24(data->buf); + if (raw_press == BMP580_PRESS_SKIPPED) { + dev_err(data->dev, "reading pressure skipped\n"); + return -EIO; + } + /* + * Pressure is returned in Pascals in fractional form down 2^16. + * We reescale /1000 to convert to kilopascal to respect IIO ABI. + */ + *val = raw_press; + *val2 = 64000; // 2^6 * 1000 + return IIO_VAL_FRACTIONAL; +} + +static const int bmp580_odr_table[][2] = { + [BMP580_ODR_240HZ] = {240, 0}, + [BMP580_ODR_218HZ] = {218, 0}, + [BMP580_ODR_199HZ] = {199, 0}, + [BMP580_ODR_179HZ] = {179, 0}, + [BMP580_ODR_160HZ] = {160, 0}, + [BMP580_ODR_149HZ] = {149, 0}, + [BMP580_ODR_140HZ] = {140, 0}, + [BMP580_ODR_129HZ] = {129, 0}, + [BMP580_ODR_120HZ] = {120, 0}, + [BMP580_ODR_110HZ] = {110, 0}, + [BMP580_ODR_100HZ] = {100, 0}, + [BMP580_ODR_89HZ] = {89, 0}, + [BMP580_ODR_80HZ] = {80, 0}, + [BMP580_ODR_70HZ] = {70, 0}, + [BMP580_ODR_60HZ] = {60, 0}, + [BMP580_ODR_50HZ] = {50, 0}, + [BMP580_ODR_45HZ] = {45, 0}, + [BMP580_ODR_40HZ] = {40, 0}, + [BMP580_ODR_35HZ] = {35, 0}, + [BMP580_ODR_30HZ] = {30, 0}, + [BMP580_ODR_25HZ] = {25, 0}, + [BMP580_ODR_20HZ] = {20, 0}, + [BMP580_ODR_15HZ] = {15, 0}, + [BMP580_ODR_10HZ] = {10, 0}, + [BMP580_ODR_5HZ] = {5, 0}, + [BMP580_ODR_4HZ] = {4, 0}, + [BMP580_ODR_3HZ] = {3, 0}, + [BMP580_ODR_2HZ] = {2, 0}, + [BMP580_ODR_1HZ] = {1, 0}, + [BMP580_ODR_0_5HZ] = {0, 500000}, + [BMP580_ODR_0_25HZ] = {0, 250000}, + [BMP580_ODR_0_125HZ] = {0, 125000}, +}; + +static int bmp580_preinit(struct bmp280_data *data) +{ + unsigned int reg; + int ret; + + /* Issue soft-reset command */ + ret = bmp580_cmd(data, BMP580_SOFT_RESET_CMD); + if (ret) + return ret; + /* Post powerup sequence */ + ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, ®); + if (ret) + return ret; + if (reg != BMP580_CHIP_ID) { + dev_err(data->dev, "preinit: unexpected chip_id\n"); + return -EINVAL; + } + ret = regmap_read(data->regmap, BMP580_REG_STATUS, ®); + if (ret) + return ret; + /* Check nvm status */ + if (!(reg & BMP580_STATUS_NVM_RDY_MASK) || (reg & BMP580_STATUS_NVM_ERR_MASK)) { + dev_err(data->dev, "preinit: nvm error on powerup sequence\n"); + return -EIO; + } + + return 0; +} + +static int bmp580_chip_config(struct bmp280_data *data) +{ + bool change = false, aux; + unsigned int tmp; + u8 reg_val; + int ret; + + /* Sets sensor in standby mode */ + ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG, + BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS, + BMP580_ODR_DEEPSLEEP_DIS | + FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP)); + if (ret) { + dev_err(data->dev, "failed to change sensor to standby mode\n"); + return ret; + } + /* From datasheet's table 4: electrical characteristics */ + usleep_range(2500, 3000); + + /* Set default DSP mode settings */ + reg_val = FIELD_PREP(BMP580_DSP_COMP_MASK, BMP580_DSP_PRESS_TEMP_COMP_EN) | + BMP580_DSP_SHDW_IIR_TEMP_EN | BMP580_DSP_SHDW_IIR_PRESS_EN; + + ret = regmap_update_bits(data->regmap, BMP580_REG_DSP_CONFIG, + BMP580_DSP_COMP_MASK | + BMP580_DSP_SHDW_IIR_TEMP_EN | + BMP580_DSP_SHDW_IIR_PRESS_EN, reg_val); + + /* Configure oversampling */ + reg_val = FIELD_PREP(BMP580_OSR_TEMP_MASK, data->oversampling_temp) | + FIELD_PREP(BMP580_OSR_PRESS_MASK, data->oversampling_press) | + BMP580_OSR_PRESS_EN; + + ret = regmap_update_bits_check(data->regmap, BMP580_REG_OSR_CONFIG, + BMP580_OSR_TEMP_MASK | BMP580_OSR_PRESS_MASK | + BMP580_OSR_PRESS_EN, + reg_val, &aux); + if (ret) { + dev_err(data->dev, "failed to write oversampling register\n"); + return ret; + } + change = change || aux; + + /* Configure output data rate */ + ret = regmap_update_bits_check(data->regmap, BMP580_REG_ODR_CONFIG, BMP580_ODR_MASK, + FIELD_PREP(BMP580_ODR_MASK, data->sampling_freq), + &aux); + if (ret) { + dev_err(data->dev, "failed to write ODR configuration register\n"); + return ret; + } + change = change || aux; + + /* Set filter data */ + reg_val = FIELD_PREP(BMP580_DSP_IIR_PRESS_MASK, data->iir_filter_coeff) | + FIELD_PREP(BMP580_DSP_IIR_TEMP_MASK, data->iir_filter_coeff); + + ret = regmap_update_bits_check(data->regmap, BMP580_REG_DSP_IIR, + BMP580_DSP_IIR_PRESS_MASK | + BMP580_DSP_IIR_TEMP_MASK, + reg_val, &aux); + if (ret) { + dev_err(data->dev, "failed to write config register\n"); + return ret; + } + change = change || aux; + + /* Restore sensor to normal operation mode */ + ret = regmap_write_bits(data->regmap, BMP580_REG_ODR_CONFIG, + BMP580_MODE_MASK, + FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_NORMAL)); + if (ret) { + dev_err(data->dev, "failed to set normal mode\n"); + return ret; + } + /* From datasheet's table 4: electrical characteristics */ + usleep_range(3000, 3500); + + if (change) { + /* + * Check if ODR and OSR settings are valid or we are + * operating in a degraded mode. + */ + ret = regmap_read(data->regmap, BMP580_REG_EFF_OSR, &tmp); + if (ret) { + dev_err(data->dev, "error reading effective OSR register\n"); + return ret; + } + if (!(tmp & BMP580_EFF_OSR_VALID_ODR)) { + dev_warn(data->dev, "OSR and ODR incompatible settings detected\n"); + /* Set current OSR settings from data on effective OSR */ + data->oversampling_temp = FIELD_GET(BMP580_EFF_OSR_TEMP_MASK, tmp); + data->oversampling_press = FIELD_GET(BMP580_EFF_OSR_PRESS_MASK, tmp); + return -EINVAL; + } + } + + return 0; +} + +static const int bmp580_oversampling_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128 }; +static const int bmp580_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128 }; + +static const struct bmp280_chip_info bmp580_chip_info = { + .id_reg = BMP580_REG_CHIP_ID, + .chip_id = BMP580_CHIP_ID, + .start_up_time = 2000, + .channels = bmp380_channels, + .num_channels = 2, + + .oversampling_temp_avail = bmp580_oversampling_avail, + .num_oversampling_temp_avail = ARRAY_SIZE(bmp580_oversampling_avail), + .oversampling_temp_default = ilog2(1), + + .oversampling_press_avail = bmp580_oversampling_avail, + .num_oversampling_press_avail = ARRAY_SIZE(bmp580_oversampling_avail), + .oversampling_press_default = ilog2(4), + + .sampling_freq_avail = bmp580_odr_table, + .num_sampling_freq_avail = ARRAY_SIZE(bmp580_odr_table) * 2, + .sampling_freq_default = BMP580_ODR_50HZ, + + .iir_filter_coeffs_avail = bmp580_iir_filter_coeffs_avail, + .num_iir_filter_coeffs_avail = ARRAY_SIZE(bmp580_iir_filter_coeffs_avail), + .iir_filter_coeff_default = 2, + + .chip_config = bmp580_chip_config, + .read_temp = bmp580_read_temp, + .read_press = bmp580_read_press, + .read_calib = NULL, + .preinit = bmp580_preinit, +}; + static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) { const int conversion_time_max[] = { 4500, 7500, 13500, 25500 }; @@ -1713,6 +2142,9 @@ int bmp280_common_probe(struct device *dev, case BMP380: chip_info = &bmp380_chip_info; break; + case BMP580: + chip_info = &bmp580_chip_info; + break; default: return -EINVAL; } @@ -1779,9 +2211,10 @@ int bmp280_common_probe(struct device *dev, */ if (data->chip_info->preinit) { ret = data->chip_info->preinit(data); - dev_err(dev, "error running preinit tasks"); - if (ret < 0) + if (ret) { + dev_err(dev, "error running preinit tasks\n"); return ret; + } } ret = data->chip_info->chip_config(data); @@ -1795,11 +2228,12 @@ int bmp280_common_probe(struct device *dev, * non-volatile memory during production". Let's read them out at probe * time once. They will not change. */ - - ret = data->chip_info->read_calib(data); - if (ret < 0) - return dev_err_probe(data->dev, ret, - "failed to read calibration coefficients\n"); + if (data->chip_info->read_calib) { + ret = data->chip_info->read_calib(data); + if (ret < 0) + return dev_err_probe(data->dev, ret, + "failed to read calibration coefficients\n"); + } /* * Attempt to grab an optional EOC IRQ - only the BMP085 has this diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c index 59921e8cd592..c52d2b477bb7 100644 --- a/drivers/iio/pressure/bmp280-i2c.c +++ b/drivers/iio/pressure/bmp280-i2c.c @@ -22,6 +22,9 @@ static int bmp280_i2c_probe(struct i2c_client *client) case BMP380: regmap_config = &bmp380_regmap_config; break; + case BMP580: + regmap_config = &bmp580_regmap_config; + break; default: return -EINVAL; } @@ -45,6 +48,7 @@ static const struct of_device_id bmp280_of_i2c_match[] = { { .compatible = "bosch,bmp280", .data = (void *)BMP280 }, { .compatible = "bosch,bme280", .data = (void *)BME280 }, { .compatible = "bosch,bmp380", .data = (void *)BMP380 }, + { .compatible = "bosch,bmp580", .data = (void *)BMP580 }, { }, }; MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match); @@ -55,6 +59,7 @@ static const struct i2c_device_id bmp280_i2c_id[] = { {"bmp280", BMP280 }, {"bme280", BME280 }, {"bmp380", BMP380 }, + {"bmp580", BMP580 }, { }, }; MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id); diff --git a/drivers/iio/pressure/bmp280-regmap.c b/drivers/iio/pressure/bmp280-regmap.c index c98c67970265..3ee56720428c 100644 --- a/drivers/iio/pressure/bmp280-regmap.c +++ b/drivers/iio/pressure/bmp280-regmap.c @@ -115,6 +115,54 @@ static bool bmp380_is_volatile_reg(struct device *dev, unsigned int reg) } } +static bool bmp580_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP580_REG_NVM_DATA_MSB: + case BMP580_REG_NVM_DATA_LSB: + case BMP580_REG_NVM_ADDR: + case BMP580_REG_ODR_CONFIG: + case BMP580_REG_OSR_CONFIG: + case BMP580_REG_INT_SOURCE: + case BMP580_REG_INT_CONFIG: + case BMP580_REG_OOR_THR_MSB: + case BMP580_REG_OOR_THR_LSB: + case BMP580_REG_OOR_CONFIG: + case BMP580_REG_OOR_RANGE: + case BMP580_REG_IF_CONFIG: + case BMP580_REG_FIFO_CONFIG: + case BMP580_REG_FIFO_SEL: + case BMP580_REG_DSP_CONFIG: + case BMP580_REG_DSP_IIR: + case BMP580_REG_CMD: + return true; + default: + return false; + } +} + +static bool bmp580_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP580_REG_NVM_DATA_MSB: + case BMP580_REG_NVM_DATA_LSB: + case BMP580_REG_FIFO_COUNT: + case BMP580_REG_INT_STATUS: + case BMP580_REG_PRESS_XLSB: + case BMP580_REG_PRESS_LSB: + case BMP580_REG_PRESS_MSB: + case BMP580_REG_FIFO_DATA: + case BMP580_REG_TEMP_XLSB: + case BMP580_REG_TEMP_LSB: + case BMP580_REG_TEMP_MSB: + case BMP580_REG_EFF_OSR: + case BMP580_REG_STATUS: + return true; + default: + return false; + } +} + const struct regmap_config bmp280_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -138,3 +186,15 @@ const struct regmap_config bmp380_regmap_config = { .volatile_reg = bmp380_is_volatile_reg, }; EXPORT_SYMBOL_NS(bmp380_regmap_config, IIO_BMP280); + +const struct regmap_config bmp580_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BMP580_REG_CMD, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = bmp580_is_writeable_reg, + .volatile_reg = bmp580_is_volatile_reg, +}; +EXPORT_SYMBOL_NS(bmp580_regmap_config, IIO_BMP280); diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index 4a2df5b5d838..5653c3c33081 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -69,6 +69,9 @@ static int bmp280_spi_probe(struct spi_device *spi) case BMP380: regmap_config = &bmp380_regmap_config; break; + case BMP580: + regmap_config = &bmp580_regmap_config; + break; default: return -EINVAL; } @@ -96,6 +99,7 @@ static const struct of_device_id bmp280_of_spi_match[] = { { .compatible = "bosch,bmp280", }, { .compatible = "bosch,bme280", }, { .compatible = "bosch,bmp380", }, + { .compatible = "bosch,bmp580", }, { }, }; MODULE_DEVICE_TABLE(of, bmp280_of_spi_match); @@ -106,6 +110,7 @@ static const struct spi_device_id bmp280_spi_id[] = { { "bmp280", BMP280 }, { "bme280", BME280 }, { "bmp380", BMP380 }, + { "bmp580", BMP580 }, { } }; MODULE_DEVICE_TABLE(spi, bmp280_spi_id); diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index efc31bc84708..27d2abc17d01 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -3,6 +3,107 @@ #include #include +/* BMP580 specific registers */ +#define BMP580_REG_CMD 0x7E +#define BMP580_REG_EFF_OSR 0x38 +#define BMP580_REG_ODR_CONFIG 0x37 +#define BMP580_REG_OSR_CONFIG 0x36 +#define BMP580_REG_IF_CONFIG 0x13 +#define BMP580_REG_REV_ID 0x02 +#define BMP580_REG_CHIP_ID 0x01 +/* OOR allows to configure a pressure alarm */ +#define BMP580_REG_OOR_CONFIG 0x35 +#define BMP580_REG_OOR_RANGE 0x34 +#define BMP580_REG_OOR_THR_MSB 0x33 +#define BMP580_REG_OOR_THR_LSB 0x32 +/* DSP registers (IIR filters) */ +#define BMP580_REG_DSP_IIR 0x31 +#define BMP580_REG_DSP_CONFIG 0x30 +/* NVM access registers */ +#define BMP580_REG_NVM_DATA_MSB 0x2D +#define BMP580_REG_NVM_DATA_LSB 0x2C +#define BMP580_REG_NVM_ADDR 0x2B +/* Status registers */ +#define BMP580_REG_STATUS 0x28 +#define BMP580_REG_INT_STATUS 0x27 +#define BMP580_REG_CHIP_STATUS 0x11 +/* Data registers */ +#define BMP580_REG_FIFO_DATA 0x29 +#define BMP580_REG_PRESS_MSB 0x22 +#define BMP580_REG_PRESS_LSB 0x21 +#define BMP580_REG_PRESS_XLSB 0x20 +#define BMP580_REG_TEMP_MSB 0x1F +#define BMP580_REG_TEMP_LSB 0x1E +#define BMP580_REG_TEMP_XLSB 0x1D +/* FIFO config registers */ +#define BMP580_REG_FIFO_SEL 0x18 +#define BMP580_REG_FIFO_COUNT 0x17 +#define BMP580_REG_FIFO_CONFIG 0x16 +/* Interruptions config registers */ +#define BMP580_REG_INT_SOURCE 0x15 +#define BMP580_REG_INT_CONFIG 0x14 + +#define BMP580_CMD_NOOP 0x00 +#define BMP580_CMD_EXTMODE_SEQ_0 0x73 +#define BMP580_CMD_EXTMODE_SEQ_1 0xB4 +#define BMP580_CMD_EXTMODE_SEQ_2 0x69 +#define BMP580_CMD_NVM_OP_SEQ_0 0x5D +#define BMP580_CMD_NVM_READ_SEQ_1 0xA5 +#define BMP580_CMD_NVM_WRITE_SEQ_1 0xA0 +#define BMP580_CMD_SOFT_RESET 0xB6 + +#define BMP580_INT_STATUS_POR_MASK BIT(4) + +#define BMP580_STATUS_CORE_RDY_MASK BIT(0) +#define BMP580_STATUS_NVM_RDY_MASK BIT(1) +#define BMP580_STATUS_NVM_ERR_MASK BIT(2) +#define BMP580_STATUS_NVM_CMD_ERR_MASK BIT(3) + +#define BMP580_OSR_PRESS_MASK GENMASK(5, 3) +#define BMP580_OSR_TEMP_MASK GENMASK(2, 0) +#define BMP580_OSR_PRESS_EN BIT(6) +#define BMP580_EFF_OSR_PRESS_MASK GENMASK(5, 3) +#define BMP580_EFF_OSR_TEMP_MASK GENMASK(2, 0) +#define BMP580_EFF_OSR_VALID_ODR BIT(7) + +#define BMP580_ODR_MASK GENMASK(6, 2) +#define BMP580_MODE_MASK GENMASK(1, 0) +#define BMP580_MODE_SLEEP 0 +#define BMP580_MODE_NORMAL 1 +#define BMP580_MODE_FORCED 2 +#define BMP580_MODE_CONTINOUS 3 +#define BMP580_ODR_DEEPSLEEP_DIS BIT(7) + +#define BMP580_DSP_COMP_MASK GENMASK(1, 0) +#define BMP580_DSP_COMP_DIS 0 +#define BMP580_DSP_TEMP_COMP_EN 1 +/* + * In section 7.27 of datasheet, modes 2 and 3 are technically the same. + * Pressure compensation means also enabling temperature compensation + */ +#define BMP580_DSP_PRESS_COMP_EN 2 +#define BMP580_DSP_PRESS_TEMP_COMP_EN 3 +#define BMP580_DSP_IIR_FORCED_FLUSH BIT(2) +#define BMP580_DSP_SHDW_IIR_TEMP_EN BIT(3) +#define BMP580_DSP_FIFO_IIR_TEMP_EN BIT(4) +#define BMP580_DSP_SHDW_IIR_PRESS_EN BIT(5) +#define BMP580_DSP_FIFO_IIR_PRESS_EN BIT(6) +#define BMP580_DSP_OOR_IIR_PRESS_EN BIT(7) + +#define BMP580_DSP_IIR_PRESS_MASK GENMASK(5, 3) +#define BMP580_DSP_IIR_TEMP_MASK GENMASK(2, 0) +#define BMP580_FILTER_OFF 0 +#define BMP580_FILTER_1X 1 +#define BMP580_FILTER_3X 2 +#define BMP580_FILTER_7X 3 +#define BMP580_FILTER_15X 4 +#define BMP580_FILTER_31X 5 +#define BMP580_FILTER_63X 6 +#define BMP580_FILTER_127X 7 + +#define BMP580_TEMP_SKIPPED 0x7f7f7f +#define BMP580_PRESS_SKIPPED 0x7f7f7f + /* BMP380 specific registers */ #define BMP380_REG_CMD 0x7E #define BMP380_REG_CONFIG 0x1F @@ -180,6 +281,7 @@ #define BMP280_REG_RESET 0xE0 #define BMP280_REG_ID 0xD0 +#define BMP580_CHIP_ID 0x50 #define BMP380_CHIP_ID 0x50 #define BMP180_CHIP_ID 0x55 #define BMP280_CHIP_ID 0x58 @@ -197,12 +299,14 @@ enum bmp280_variant { BMP280, BME280, BMP380, + BMP580, }; /* Regmap configurations */ extern const struct regmap_config bmp180_regmap_config; extern const struct regmap_config bmp280_regmap_config; extern const struct regmap_config bmp380_regmap_config; +extern const struct regmap_config bmp580_regmap_config; /* Probe called from different transports */ int bmp280_common_probe(struct device *dev,