@@ -120,7 +120,7 @@ static efi_status_t reserve_kernel_base(unsigned long dram_base,
*/
status = efi_get_memory_map(&map);
if (status != EFI_SUCCESS) {
- efi_err("reserve_kernel_base(): Unable to retrieve memory map.\n");
+ efi_err("%s(): Unable to retrieve memory map\n", __func__);
return status;
}
@@ -162,7 +162,7 @@ static efi_status_t reserve_kernel_base(unsigned long dram_base,
(end - start) / EFI_PAGE_SIZE,
&start);
if (status != EFI_SUCCESS) {
- efi_err("reserve_kernel_base(): alloc failed.\n");
+ efi_err("%s(): alloc failed\n", __func__);
goto out;
}
break;
@@ -219,7 +219,7 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
status = reserve_kernel_base(kernel_base, reserve_addr, reserve_size);
if (status != EFI_SUCCESS) {
- efi_err("Unable to allocate memory for uncompressed kernel.\n");
+ efi_err("Unable to allocate memory for uncompressed kernel\n");
return status;
}
@@ -232,7 +232,7 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
status = efi_relocate_kernel(image_addr, *image_size, *image_size,
kernel_base + MAX_UNCOMP_KERNEL_SIZE, 0, 0);
if (status != EFI_SUCCESS) {
- efi_err("Failed to relocate kernel.\n");
+ efi_err("Failed to relocate kernel\n");
efi_free(*reserve_size, *reserve_addr);
*reserve_size = 0;
return status;
@@ -244,7 +244,7 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
* address at which the zImage is loaded.
*/
if (*image_addr + *image_size > dram_base + ZIMAGE_OFFSET_LIMIT) {
- efi_err("Failed to relocate kernel, no low memory available.\n");
+ efi_err("Failed to relocate kernel, no low memory available\n");
efi_free(*reserve_size, *reserve_addr);
*reserve_size = 0;
efi_free(*image_size, *image_addr);
@@ -251,7 +251,7 @@ efi_status_t efi_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg)
if (!IS_ENABLED(CONFIG_EFI_ARMSTUB_DTB_LOADER) ||
secure_boot != efi_secureboot_mode_disabled) {
if (strstr(cmdline_ptr, "dtb="))
- efi_err("Ignoring DTB from command line.\n");
+ efi_err("Ignoring DTB from command line\n");
} else {
status = efi_load_dtb(image, &fdt_addr, &fdt_size);
@@ -49,11 +49,14 @@ extern const efi_system_table_t *efi_system_table;
#define efi_call_proto(inst, func, ...) inst->func(inst, ##__VA_ARGS__)
#endif
-#define efi_info(msg) do { \
- if (!efi_quiet) efi_printk("EFI stub: "msg); \
+#define efi_info(fmt, ...) \
+do { \
+ if (!efi_quiet) \
+ efi_printk("EFI stub: " fmt, ##__VA_ARGS__); \
} while (0)
-#define efi_err(msg) efi_printk("EFI stub: ERROR: "msg)
+#define efi_err(fmt, ...) \
+ efi_printk("EFI stub: ERROR: " fmt, ##__VA_ARGS__)
/* Helper macros for the usual case of using simple C variables: */
#ifndef fdt_setprop_inplace_var
@@ -270,7 +270,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(void *handle,
*/
status = efi_get_memory_map(&map);
if (status != EFI_SUCCESS) {
- efi_err("Unable to retrieve UEFI memory map.\n");
+ efi_err("Unable to retrieve UEFI memory map\n");
return status;
}
@@ -279,7 +279,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(void *handle,
map.map = &memory_map;
status = efi_allocate_pages(MAX_FDT_SIZE, new_fdt_addr, max_addr);
if (status != EFI_SUCCESS) {
- efi_err("Unable to allocate memory for new device tree.\n");
+ efi_err("Unable to allocate memory for new device tree\n");
goto fail;
}
@@ -296,7 +296,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(void *handle,
initrd_addr, initrd_size);
if (status != EFI_SUCCESS) {
- efi_err("Unable to construct new device tree.\n");
+ efi_err("Unable to construct new device tree\n");
goto fail_free_new_fdt;
}
@@ -342,7 +342,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(void *handle,
return EFI_SUCCESS;
}
- efi_err("Exit boot services failed.\n");
+ efi_err("Exit boot services failed\n");
fail_free_new_fdt:
efi_free(MAX_FDT_SIZE, *new_fdt_addr);
@@ -28,7 +28,7 @@ void efi_pci_disable_bridge_busmaster(void)
if (status != EFI_BUFFER_TOO_SMALL) {
if (status != EFI_SUCCESS && status != EFI_NOT_FOUND)
- efi_err("Failed to locate PCI I/O handles'\n");
+ efi_err("Failed to locate PCI I/O handles\n");
return;
}
@@ -42,7 +42,7 @@ void efi_pci_disable_bridge_busmaster(void)
status = efi_bs_call(locate_handle, EFI_LOCATE_BY_PROTOCOL, &pci_proto,
NULL, &pci_handle_size, pci_handle);
if (status != EFI_SUCCESS) {
- efi_err("Failed to locate PCI I/O handles'\n");
+ efi_err("Failed to locate PCI I/O handles\n");
goto free_handle;
}
@@ -157,7 +157,7 @@ efi_status_t efi_relocate_kernel(unsigned long *image_addr,
min_addr);
}
if (status != EFI_SUCCESS) {
- efi_err("Failed to allocate usable memory for kernel.\n");
+ efi_err("Failed to allocate usable memory for kernel\n");
return status;
}
@@ -67,10 +67,10 @@ enum efi_secureboot_mode efi_get_secureboot(void)
return efi_secureboot_mode_disabled;
secure_boot_enabled:
- efi_info("UEFI Secure Boot is enabled.\n");
+ efi_info("UEFI Secure Boot is enabled\n");
return efi_secureboot_mode_enabled;
out_efi_err:
- efi_err("Could not determine UEFI Secure Boot status.\n");
+ efi_err("Could not determine UEFI Secure Boot status\n");
return efi_secureboot_mode_unknown;
}
Use a standard style for these output logging messages. Miscellanea: o Use more common macro #defines with fmt, ##__VA_ARGS__ 0 Remove trailing messages periods and odd ' uses o Remove embedded function names and use %s, __func__ Signed-off-by: Joe Perches <joe@perches.com> --- Perhaps these trivialities on top of this series? drivers/firmware/efi/libstub/arm32-stub.c | 10 +++++----- drivers/firmware/efi/libstub/efi-stub.c | 2 +- drivers/firmware/efi/libstub/efistub.h | 9 ++++++--- drivers/firmware/efi/libstub/fdt.c | 8 ++++---- drivers/firmware/efi/libstub/pci.c | 4 ++-- drivers/firmware/efi/libstub/relocate.c | 2 +- drivers/firmware/efi/libstub/secureboot.c | 4 ++-- 7 files changed, 21 insertions(+), 18 deletions(-)