From patchwork Tue Feb 23 10:01:44 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 62687 Delivered-To: patch@linaro.org Received: by 10.112.43.199 with SMTP id y7csp1742611lbl; Tue, 23 Feb 2016 02:02:33 -0800 (PST) X-Received: by 10.98.72.202 with SMTP id q71mr44825571pfi.69.1456221752935; Tue, 23 Feb 2016 02:02:32 -0800 (PST) Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id s63si38929170pfs.86.2016.02.23.02.02.32; Tue, 23 Feb 2016 02:02:32 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-fbdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-fbdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-fbdev-owner@vger.kernel.org; dkim=neutral (body hash did not verify) header.i=@linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751912AbcBWKC3 (ORCPT + 2 others); Tue, 23 Feb 2016 05:02:29 -0500 Received: from mail-lf0-f46.google.com ([209.85.215.46]:32988 "EHLO mail-lf0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751268AbcBWKCW (ORCPT ); Tue, 23 Feb 2016 05:02:22 -0500 Received: by mail-lf0-f46.google.com with SMTP id m1so112780648lfg.0 for ; Tue, 23 Feb 2016 02:02:21 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=43qo9ZvNCaDjxk8qwvW7ZU2lZM+5zNa/2Qqce4HXqaw=; b=JeQBtve6LBucX+QnrGO+WybwYlgfC7v/pccHACcgrbNfKBvu1SQaG12thoaybxDzNn /alNb+ME8ijvN5N19C2uh5aw0+5GVGZDFtfpe7uawaeXwMrdswaBUKgeG2EnxWO/vhOD OvS35cU7PJKbv5BUBpxaowQ02MqgxdsGPzivk= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=43qo9ZvNCaDjxk8qwvW7ZU2lZM+5zNa/2Qqce4HXqaw=; b=NhV7OKIVgijM32k31EhgPi3leL/W37EQfZPseUb0ydTdQ3dy6xPgMPMw/U2aJtQgvU J5lB8ST2bzJJbJVAGJlNeDwMmpoZq09pNWuu+uU+jYz0+7MT/PkqI9ayHxsGN1TBP4sN VODF7URIygBVPrnyBFxNC6ZgQCyH2sUhhJRDaEuE/Ismg/lMCkvAk8MrMOIE4h9gyomA NMyEaNmPlrGVp6jLAb4FaijlS3w3CVzupUF31iP7L9Lk+9Tm+gGidv2Xt16cXaIxCOqL u4hQbbxC8jxFcfrV94BhYwlGgwOtN2Zfncun2Sikaqguca1N8xtaaYccAz7+LDwAvBa2 IFQQ== X-Gm-Message-State: AG10YOTf20XJL6Ic0NRRbE1KkiyoQiW82G9u/kjrtTCOd0ZATZ9bZNmgKOpVyfe0Xdcn4fbs X-Received: by 10.25.0.6 with SMTP id 6mr9894805lfa.132.1456221741220; Tue, 23 Feb 2016 02:02:21 -0800 (PST) Received: from localhost.localdomain ([85.235.10.227]) by smtp.gmail.com with ESMTPSA id k70sm3926525lfg.5.2016.02.23.02.02.19 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 23 Feb 2016 02:02:20 -0800 (PST) From: Linus Walleij To: linux-fbdev@vger.kernel.org, Tomi Valkeinen , Jean-Christophe Plagniol-Villard , Pawel Moll , Rob Herring , Russell King Cc: linux-arm-kernel@lists.infradead.org, Arnd Bergmann , Ray Jui , Linus Walleij Subject: [PATCH 7/7 v2] video: ARM CLCD: add special panel hook for Versatiles Date: Tue, 23 Feb 2016 11:01:44 +0100 Message-Id: <1456221704-5792-8-git-send-email-linus.walleij@linaro.org> X-Mailer: git-send-email 2.4.3 In-Reply-To: <1456221704-5792-1-git-send-email-linus.walleij@linaro.org> References: <1456221704-5792-1-git-send-email-linus.walleij@linaro.org> Sender: linux-fbdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-fbdev@vger.kernel.org This adds a special panel init hook for the ARM reference designs Integrator (IM-PD1), Versatile and RealView, so we can configure a DPI panel from device tree and have it working without boardfiles for these machines. Basically this is the same code as from the board files, just moved over to look up the syscon DT node and manipulate the special CLCD register from their regmap. Tested on RealView PB11MPcore. Cc: Pawel Moll Cc: Rob Herring Cc: Russell King Signed-off-by: Linus Walleij --- ChangeLog v1->v2: - For Versatile: just detect the panel and look up and compare the expected compatible string to what is provided by the device tree. If the device tree does not match the hardware-detected display, print a warning and continue anyways. - Make no attempt at actually switching the panel at runtime or to modify the device tree at runtime. --- drivers/video/fbdev/Kconfig | 2 + drivers/video/fbdev/amba-clcd-versatile.c | 391 ++++++++++++++++++++++++++++++ drivers/video/fbdev/amba-clcd-versatile.h | 17 ++ drivers/video/fbdev/amba-clcd.c | 4 +- 4 files changed, 413 insertions(+), 1 deletion(-) create mode 100644 drivers/video/fbdev/amba-clcd-versatile.h -- 2.4.3 -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 6dcd91237551..a3fdc4cd1837 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -307,6 +307,8 @@ config PLAT_VERSATILE_CLCD def_bool ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_INTEGRATOR depends on ARM depends on FB_ARMCLCD && FB=y + select REGMAP + select MFD_SYSCON config FB_ACORN bool "Acorn VIDC support" diff --git a/drivers/video/fbdev/amba-clcd-versatile.c b/drivers/video/fbdev/amba-clcd-versatile.c index 7a8afcd4573e..892bbf6c6a07 100644 --- a/drivers/video/fbdev/amba-clcd-versatile.c +++ b/drivers/video/fbdev/amba-clcd-versatile.c @@ -3,6 +3,12 @@ #include #include #include +#include +#include +#include +#include +#include +#include "amba-clcd-versatile.h" static struct clcd_panel vga = { .mode = { @@ -180,3 +186,388 @@ void versatile_clcd_remove_dma(struct clcd_fb *fb) dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, fb->fb.fix.smem_start); } + +#ifdef CONFIG_OF + +static struct regmap *versatile_syscon_map; +static struct regmap *versatile_ib2_map; + +/* + * We detect the different syscon types from the compatible strings. + */ +enum versatile_clcd { + INTEGRATOR_CLCD_CM, + VERSATILE_CLCD, + REALVIEW_CLCD_EB, + REALVIEW_CLCD_PB1176, + REALVIEW_CLCD_PB11MP, + REALVIEW_CLCD_PBA8, + REALVIEW_CLCD_PBX, +}; + +static const struct of_device_id versatile_clcd_of_match[] = { + { + .compatible = "arm,core-module-integrator", + .data = (void *)INTEGRATOR_CLCD_CM, + }, + { + .compatible = "arm,versatile-sysreg", + .data = (void *)VERSATILE_CLCD, + }, + { + .compatible = "arm,realview-eb-syscon", + .data = (void *)REALVIEW_CLCD_EB, + }, + { + .compatible = "arm,realview-pb1176-syscon", + .data = (void *)REALVIEW_CLCD_PB1176, + }, + { + .compatible = "arm,realview-pb11mp-syscon", + .data = (void *)REALVIEW_CLCD_PB11MP, + }, + { + .compatible = "arm,realview-pba8-syscon", + .data = (void *)REALVIEW_CLCD_PBA8, + }, + { + .compatible = "arm,realview-pbx-syscon", + .data = (void *)REALVIEW_CLCD_PBX, + }, + {}, +}; + +/* + * Core module CLCD control on the Integrator/CP, bits + * 8 thru 19 of the CM_CONTROL register controls a bunch + * of CLCD settings. + */ +#define INTEGRATOR_HDR_CTRL_OFFSET 0x0C +#define INTEGRATOR_CLCD_LCDBIASEN BIT(8) +#define INTEGRATOR_CLCD_LCDBIASUP BIT(9) +#define INTEGRATOR_CLCD_LCDBIASDN BIT(10) +/* Bits 11,12,13 controls the LCD type */ +#define INTEGRATOR_CLCD_LCDMUX_MASK (BIT(11)|BIT(12)|BIT(13)) +#define INTEGRATOR_CLCD_LCDMUX_LCD24 BIT(11) +#define INTEGRATOR_CLCD_LCDMUX_VGA565 BIT(12) +#define INTEGRATOR_CLCD_LCDMUX_SHARP (BIT(11)|BIT(12)) +#define INTEGRATOR_CLCD_LCDMUX_VGA555 BIT(13) +#define INTEGRATOR_CLCD_LCDMUX_VGA24 (BIT(11)|BIT(12)|BIT(13)) +#define INTEGRATOR_CLCD_LCD0_EN BIT(14) +#define INTEGRATOR_CLCD_LCD1_EN BIT(15) +/* R/L flip on Sharp */ +#define INTEGRATOR_CLCD_LCD_STATIC1 BIT(16) +/* U/D flip on Sharp */ +#define INTEGRATOR_CLCD_LCD_STATIC2 BIT(17) +/* No connection on Sharp */ +#define INTEGRATOR_CLCD_LCD_STATIC BIT(18) +/* 0 = 24bit VGA, 1 = 18bit VGA */ +#define INTEGRATOR_CLCD_LCD_N24BITEN BIT(19) + +#define INTEGRATOR_CLCD_MASK (INTEGRATOR_CLCD_LCDMUX_MASK | \ + INTEGRATOR_CLCD_LCD0_EN | \ + INTEGRATOR_CLCD_LCD1_EN | \ + INTEGRATOR_CLCD_LCD_STATIC1 | \ + INTEGRATOR_CLCD_LCD_STATIC2 | \ + INTEGRATOR_CLCD_LCD_STATIC | \ + INTEGRATOR_CLCD_LCD_N24BITEN) + +static void integrator_clcd_enable(struct clcd_fb *fb) +{ + struct fb_var_screeninfo *var = &fb->fb.var; + u32 val; + + dev_info(&fb->dev->dev, "enable Integrator CLCD connectors\n"); + + val = INTEGRATOR_CLCD_LCD_STATIC1 | INTEGRATOR_CLCD_LCD_STATIC2 | + INTEGRATOR_CLCD_LCD0_EN | INTEGRATOR_CLCD_LCD1_EN; + if (var->bits_per_pixel <= 8 || + (var->bits_per_pixel == 16 && var->green.length == 5)) + /* Pseudocolor, RGB555, BGR555 */ + val |= INTEGRATOR_CLCD_LCDMUX_VGA555; + else if (fb->fb.var.bits_per_pixel <= 16) + /* truecolor RGB565 */ + val |= INTEGRATOR_CLCD_LCDMUX_VGA565; + else + val = 0; /* no idea for this, don't trust the docs */ + + regmap_update_bits(versatile_syscon_map, + INTEGRATOR_HDR_CTRL_OFFSET, + 0, + INTEGRATOR_CLCD_MASK); +} + +/* + * This configuration register in the Versatile and RealView + * family is uniformly present but appears more and more + * unutilized starting with the RealView series. + */ +#define SYS_CLCD 0x50 +#define SYS_CLCD_MODE_MASK (BIT(0)|BIT(1)) +#define SYS_CLCD_MODE_888 0 +#define SYS_CLCD_MODE_5551 BIT(0) +#define SYS_CLCD_MODE_565_R_LSB BIT(1) +#define SYS_CLCD_MODE_565_B_LSB (BIT(0)|BIT(1)) +#define SYS_CLCD_CONNECTOR_MASK (BIT(2)|BIT(3)|BIT(4)|BIT(5)) +#define SYS_CLCD_NLCDIOON BIT(2) +#define SYS_CLCD_VDDPOSSWITCH BIT(3) +#define SYS_CLCD_PWR3V5SWITCH BIT(4) +#define SYS_CLCD_VDDNEGSWITCH BIT(5) +#define SYS_CLCD_TSNSS BIT(6) /* touchscreen enable */ +#define SYS_CLCD_SSPEXP BIT(7) /* SSP expansion enable */ + +/* The Versatile can detect the connected panel type */ +#define SYS_CLCD_CLCDID_MASK (BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12)) +#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) +#define SYS_CLCD_ID_SHARP_8_4 (0x01 << 8) +#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) +#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) +#define SYS_CLCD_ID_VGA (0x1f << 8) + +#define SYS_CLCD_TSNDAV BIT(13) /* data ready from TS */ + +/* IB2 control register for the Versatile daughterboard */ +#define IB2_CTRL 0x00 +#define IB2_CTRL_LCD_SD BIT(1) /* 1 = shut down LCD */ +#define IB2_CTRL_LCD_BL_ON BIT(0) +#define IB2_CTRL_LCD_MASK (BIT(0)|BIT(1)) + +static void versatile_clcd_disable(struct clcd_fb *fb) +{ + dev_info(&fb->dev->dev, "disable Versatile CLCD connectors\n"); + regmap_update_bits(versatile_syscon_map, + SYS_CLCD, + SYS_CLCD_CONNECTOR_MASK, + 0); + + /* If we're on an IB2 daughterboard, turn off display */ + if (versatile_ib2_map) { + dev_info(&fb->dev->dev, "disable IB2 display\n"); + regmap_update_bits(versatile_ib2_map, + IB2_CTRL, + IB2_CTRL_LCD_MASK, + IB2_CTRL_LCD_SD); + } +} + +static void versatile_clcd_enable(struct clcd_fb *fb) +{ + struct fb_var_screeninfo *var = &fb->fb.var; + u32 val = 0; + + dev_info(&fb->dev->dev, "enable Versatile CLCD connectors\n"); + switch (var->green.length) { + case 5: + val |= SYS_CLCD_MODE_5551; + break; + case 6: + if (var->red.offset == 0) + val |= SYS_CLCD_MODE_565_R_LSB; + else + val |= SYS_CLCD_MODE_565_B_LSB; + break; + case 8: + val |= SYS_CLCD_MODE_888; + break; + } + + /* Set up the MUX */ + regmap_update_bits(versatile_syscon_map, + SYS_CLCD, + SYS_CLCD_MODE_MASK, + val); + + /* Then enable the display */ + regmap_update_bits(versatile_syscon_map, + SYS_CLCD, + SYS_CLCD_CONNECTOR_MASK, + SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH); + + /* If we're on an IB2 daughterboard, turn on display */ + if (versatile_ib2_map) { + dev_info(&fb->dev->dev, "enable IB2 display\n"); + regmap_update_bits(versatile_ib2_map, + IB2_CTRL, + IB2_CTRL_LCD_MASK, + IB2_CTRL_LCD_BL_ON); + } +} + +static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) +{ + clcdfb_decode(fb, regs); + + /* Always clear BGR for RGB565: we do the routing externally */ + if (fb->fb.var.green.length == 6) + regs->cntl &= ~CNTL_BGR; +} + +static void realview_clcd_disable(struct clcd_fb *fb) +{ + dev_info(&fb->dev->dev, "disable RealView CLCD connectors\n"); + regmap_update_bits(versatile_syscon_map, + SYS_CLCD, + SYS_CLCD_CONNECTOR_MASK, + 0); +} + +static void realview_clcd_enable(struct clcd_fb *fb) +{ + dev_info(&fb->dev->dev, "enable RealView CLCD connectors\n"); + regmap_update_bits(versatile_syscon_map, + SYS_CLCD, + SYS_CLCD_CONNECTOR_MASK, + SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH); +} + +struct versatile_panel { + u32 id; + char *compatible; + bool ib2; +}; + +static const struct versatile_panel versatile_panels[] = { + { + .id = SYS_CLCD_ID_VGA, + .compatible = "VGA", + }, + { + .id = SYS_CLCD_ID_SANYO_3_8, + .compatible = "sanyo,tm38qv67a02a", + }, + { + .id = SYS_CLCD_ID_SHARP_8_4, + .compatible = "sharp,lq084v1dg21", + }, + { + .id = SYS_CLCD_ID_EPSON_2_2, + .compatible = "epson,l2f50113t00", + }, + { + .id = SYS_CLCD_ID_SANYO_2_5, + .compatible = "sanyo,alr252rgt", + .ib2 = true, + }, +}; + +static void versatile_panel_probe(struct device *dev, + struct device_node *endpoint) +{ + struct versatile_panel const *vpanel = NULL; + struct device_node *panel = NULL; + u32 val; + int ret; + int i; + + /* + * The Versatile CLCD has a panel auto-detection mechanism. + * We use this and look for the compatible panel in the + * device tree. + */ + ret = regmap_read(versatile_syscon_map, SYS_CLCD, &val); + if (ret) { + dev_err(dev, "cannot read CLCD syscon register\n"); + return; + } + val &= SYS_CLCD_CLCDID_MASK; + + /* First find corresponding panel information */ + for (i = 0; i < ARRAY_SIZE(versatile_panels); i++) { + vpanel = &versatile_panels[i]; + + if (val == vpanel->id) { + dev_err(dev, "autodetected panel \"%s\"\n", + vpanel->compatible); + break; + } + } + if (i == ARRAY_SIZE(versatile_panels)) { + dev_err(dev, "could not auto-detect panel\n"); + return; + } + + panel = of_graph_get_remote_port_parent(endpoint); + if (!panel) { + dev_err(dev, "could not locate panel in DT\n"); + return; + } + if (!of_device_is_compatible(panel, vpanel->compatible)) + dev_err(dev, "panel in DT is not compatible with the " + "auto-detected panel, continuing anyway\n"); + + /* + * If we have a Sanyo 2.5" port + * that we're running on an IB2 and proceed to look for the + * IB2 syscon regmap. + */ + if (!vpanel->ib2) + return; + + versatile_ib2_map = syscon_regmap_lookup_by_compatible( + "arm,versatile-ib2-syscon"); + if (IS_ERR(versatile_ib2_map)) { + dev_err(dev, "could not locate IB2 control register\n"); + versatile_ib2_map = NULL; + return; + } +} + +int versatile_clcd_init_panel(struct clcd_fb *fb, + struct device_node *endpoint) +{ + const struct of_device_id *clcd_id; + enum versatile_clcd versatile_clcd_type; + struct device_node *np; + struct regmap *map; + struct device *dev = &fb->dev->dev; + + np = of_find_matching_node_and_match(NULL, versatile_clcd_of_match, + &clcd_id); + if (!np) { + dev_err(dev, "no Versatile syscon node\n"); + return -ENODEV; + } + versatile_clcd_type = (enum versatile_clcd)clcd_id->data; + + map = syscon_node_to_regmap(np); + if (!map) { + dev_err(dev, "no Versatile syscon regmap\n"); + return -ENODEV; + } + + switch (versatile_clcd_type) { + case INTEGRATOR_CLCD_CM: + versatile_syscon_map = map; + fb->board->enable = integrator_clcd_enable; + /* Override the caps, we have only these */ + fb->board->caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 | + CLCD_CAP_888; + dev_info(dev, "set up callbacks for Integrator PL110\n"); + break; + case VERSATILE_CLCD: + versatile_syscon_map = map; + fb->board->enable = versatile_clcd_enable; + fb->board->disable = versatile_clcd_disable; + fb->board->decode = versatile_clcd_decode; + versatile_panel_probe(dev, endpoint); + dev_info(dev, "set up callbacks for Versatile\n"); + break; + case REALVIEW_CLCD_EB: + case REALVIEW_CLCD_PB1176: + case REALVIEW_CLCD_PB11MP: + case REALVIEW_CLCD_PBA8: + case REALVIEW_CLCD_PBX: + versatile_syscon_map = map; + fb->board->enable = realview_clcd_enable; + fb->board->disable = realview_clcd_disable; + dev_info(dev, "set up callbacks for RealView PL111\n"); + break; + default: + dev_info(dev, "unknown Versatile system controller\n"); + break; + } + + return 0; +} + +#endif diff --git a/drivers/video/fbdev/amba-clcd-versatile.h b/drivers/video/fbdev/amba-clcd-versatile.h new file mode 100644 index 000000000000..1b14359c2cf6 --- /dev/null +++ b/drivers/video/fbdev/amba-clcd-versatile.h @@ -0,0 +1,17 @@ +/* + * Special local versatile callbacks + */ +#include +#include +#include + +#if defined(CONFIG_PLAT_VERSATILE_CLCD) && defined(CONFIG_OF) +int versatile_clcd_init_panel(struct clcd_fb *fb, + struct device_node *endpoint); +#else +static inline int versatile_clcd_init_panel(struct clcd_fb *fb, + struct device_node *endpoint) +{ + return 0; +} +#endif diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c index 2541b237e46e..9a0e7ebeaa33 100644 --- a/drivers/video/fbdev/amba-clcd.c +++ b/drivers/video/fbdev/amba-clcd.c @@ -38,6 +38,7 @@ #include #include "amba-clcd-nomadik.h" +#include "amba-clcd-versatile.h" #define to_clcd(info) container_of(info, struct clcd_fb, fb) @@ -1042,7 +1043,8 @@ static int clcdfb_remove(struct amba_device *dev) } static struct clcd_vendor_data vendor_arm = { - /* No special business */ + /* Sets up the versatile board displays */ + .init_panel = versatile_clcd_init_panel, }; static struct clcd_vendor_data vendor_nomadik = {