From patchwork Wed Mar 13 12:48:27 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= X-Patchwork-Id: 780146 Received: from metis.whiteo.stw.pengutronix.de (metis.whiteo.stw.pengutronix.de [185.203.201.7]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 14F4F1DFD5 for ; Wed, 13 Mar 2024 12:48:36 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.203.201.7 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710334119; cv=none; b=iyjxkPGQigXY3bull2P/dbRWIcPR3vzVfX65sNu5Zn3q3KuaaZysrOvXbE5CZx+DMIYeTIy/rcRb13XfgtEYDq+F5TXaYi6un9DgGyNipx657CF17WCZJ8P9EjZhqV4WZFz8gyQcBwagqyu772LJqjPMz49sN+EP72lDPyom+W8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710334119; c=relaxed/simple; bh=8JCZBRLDqpfdy3XyhHNbnnGA0ACyHXIQNghKOUbyhsg=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version:Content-Type; b=AhCRqhensEi1gNtmY+/Id4nkhswJnFA1YZqRJDA9bdwSby74Q23wdESk6dBMfkxh40wcgP4LNf5eWvLYTMgNGWeTMOkaXt0AfBfRek2lfxFypgM8heuw0jVZniwdDC/bx33uhkGRDocSoCOsS6F0b5awSgF2BsUDpV0d8vginJA= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=pengutronix.de; spf=pass smtp.mailfrom=pengutronix.de; arc=none smtp.client-ip=185.203.201.7 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=pengutronix.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=pengutronix.de Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1rkO23-0006ff-F9; Wed, 13 Mar 2024 13:48:31 +0100 Received: from [2a0a:edc0:0:900:1d::77] (helo=ptz.office.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1rkO22-0067NO-Fe; Wed, 13 Mar 2024 13:48:30 +0100 Received: from ukl by ptz.office.stw.pengutronix.de with local (Exim 4.96) (envelope-from ) id 1rkO22-005Qfj-1H; Wed, 13 Mar 2024 13:48:30 +0100 From: =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= To: Lee Jones , Daniel Thompson , Jingoo Han , Helge Deller Cc: dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org, kernel@pengutronix.de, linux-pwm@vger.kernel.org Subject: [PATCH] backlight: lp8788: Drop support for platform data Date: Wed, 13 Mar 2024 13:48:27 +0100 Message-ID: <20240313124828.861731-2-u.kleine-koenig@pengutronix.de> X-Mailer: git-send-email 2.43.0 Precedence: bulk X-Mailing-List: linux-fbdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Developer-Signature: v=1; a=openpgp-sha256; l=10032; i=u.kleine-koenig@pengutronix.de; h=from:subject; bh=8JCZBRLDqpfdy3XyhHNbnnGA0ACyHXIQNghKOUbyhsg=; b=owEBbQGS/pANAwAKAY+A+1h9Ev5OAcsmYgBl8aCcmN8f3BrE3xslU3gQhzzBOQ7QwoJp5MkJh B/jtWm4ovyJATMEAAEKAB0WIQQ/gaxpOnoeWYmt/tOPgPtYfRL+TgUCZfGgnAAKCRCPgPtYfRL+ Tj9tB/wOZwbeJ4cnMlVDPyGhu91KE5zlgM1dOv6iMJEWl5yTOwmZlqrzqW5pIr2+kAEdbFscron e/IBAaG3j80nEefL8qbWFSliTWAPGlECPlujusvi+qFjqQXge8xlvNAV0PJozkVx4zAc59LUtKc f7puaakYj70Zp+W7NvQrzVAP0e5narLniBAw/J1PukxwcOuvSz84w5b5beC+yu4a687w/M38UU/ 71n4tgotH6T1YtHTqkmBBFiLH28LeYCCATQ3cZ/MKa4GfSjrcLZZ4XfX95iDh8M2l6ekbHnvFRy KrHn2UlvVOCDHv8ROipxxTY4bpbhRbmx527jFXHVaMdjDWNh X-Developer-Key: i=u.kleine-koenig@pengutronix.de; a=openpgp; fpr=0D2511F322BFAB1C1580266BE2DCDD9132669BD6 X-SA-Exim-Connect-IP: 2a0a:edc0:0:c01:1d::a2 X-SA-Exim-Mail-From: ukl@pengutronix.de X-SA-Exim-Scanned: No (on metis.whiteo.stw.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-fbdev@vger.kernel.org The backlight driver supports getting passed platform data. However this isn't used. This allows to remove quite some dead code from the driver because bl->pdata is always NULL, and so bl->mode is always LP8788_BL_REGISTER_ONLY. Signed-off-by: Uwe Kleine-König --- Hello, after doing some changes to I noticed the lp8788 bl and mfd driver got recompiled. Then I found the pwm stuff in there isn't actually being used. Here comes the respective simplification. Best regards Uwe drivers/video/backlight/lp8788_bl.c | 150 ++-------------------------- include/linux/mfd/lp8788.h | 36 ------- 2 files changed, 8 insertions(+), 178 deletions(-) base-commit: dad309222e4c3fc7f88b20ce725ce1e0eea07cc7 diff --git a/drivers/video/backlight/lp8788_bl.c b/drivers/video/backlight/lp8788_bl.c index 31f97230ee50..f3a89677c31c 100644 --- a/drivers/video/backlight/lp8788_bl.c +++ b/drivers/video/backlight/lp8788_bl.c @@ -12,7 +12,6 @@ #include #include #include -#include #include /* Register address */ @@ -31,149 +30,41 @@ #define MAX_BRIGHTNESS 127 #define DEFAULT_BL_NAME "lcd-backlight" -struct lp8788_bl_config { - enum lp8788_bl_ctrl_mode bl_mode; - enum lp8788_bl_dim_mode dim_mode; - enum lp8788_bl_full_scale_current full_scale; - enum lp8788_bl_ramp_step rise_time; - enum lp8788_bl_ramp_step fall_time; - enum pwm_polarity pwm_pol; -}; - struct lp8788_bl { struct lp8788 *lp; struct backlight_device *bl_dev; - struct lp8788_backlight_platform_data *pdata; - enum lp8788_bl_ctrl_mode mode; struct pwm_device *pwm; }; -static struct lp8788_bl_config default_bl_config = { - .bl_mode = LP8788_BL_REGISTER_ONLY, - .dim_mode = LP8788_DIM_EXPONENTIAL, - .full_scale = LP8788_FULLSCALE_1900uA, - .rise_time = LP8788_RAMP_8192us, - .fall_time = LP8788_RAMP_8192us, - .pwm_pol = PWM_POLARITY_NORMAL, -}; - -static inline bool is_brightness_ctrl_by_pwm(enum lp8788_bl_ctrl_mode mode) -{ - return mode == LP8788_BL_COMB_PWM_BASED; -} - -static inline bool is_brightness_ctrl_by_register(enum lp8788_bl_ctrl_mode mode) -{ - return mode == LP8788_BL_REGISTER_ONLY || - mode == LP8788_BL_COMB_REGISTER_BASED; -} - static int lp8788_backlight_configure(struct lp8788_bl *bl) { - struct lp8788_backlight_platform_data *pdata = bl->pdata; - struct lp8788_bl_config *cfg = &default_bl_config; int ret; u8 val; - /* - * Update chip configuration if platform data exists, - * otherwise use the default settings. - */ - if (pdata) { - cfg->bl_mode = pdata->bl_mode; - cfg->dim_mode = pdata->dim_mode; - cfg->full_scale = pdata->full_scale; - cfg->rise_time = pdata->rise_time; - cfg->fall_time = pdata->fall_time; - cfg->pwm_pol = pdata->pwm_pol; - } - /* Brightness ramp up/down */ - val = (cfg->rise_time << LP8788_BL_RAMP_RISE_SHIFT) | cfg->fall_time; + val = (LP8788_RAMP_8192us << LP8788_BL_RAMP_RISE_SHIFT) | LP8788_RAMP_8192us; ret = lp8788_write_byte(bl->lp, LP8788_BL_RAMP, val); if (ret) return ret; /* Fullscale current setting */ - val = (cfg->full_scale << LP8788_BL_FULLSCALE_SHIFT) | - (cfg->dim_mode << LP8788_BL_DIM_MODE_SHIFT); + val = (LP8788_FULLSCALE_1900uA << LP8788_BL_FULLSCALE_SHIFT) | + (LP8788_DIM_EXPONENTIAL << LP8788_BL_DIM_MODE_SHIFT); /* Brightness control mode */ - switch (cfg->bl_mode) { - case LP8788_BL_REGISTER_ONLY: - val |= LP8788_BL_EN; - break; - case LP8788_BL_COMB_PWM_BASED: - case LP8788_BL_COMB_REGISTER_BASED: - val |= LP8788_BL_EN | LP8788_BL_PWM_INPUT_EN | - (cfg->pwm_pol << LP8788_BL_PWM_POLARITY_SHIFT); - break; - default: - dev_err(bl->lp->dev, "invalid mode: %d\n", cfg->bl_mode); - return -EINVAL; - } - - bl->mode = cfg->bl_mode; + val |= LP8788_BL_EN; return lp8788_write_byte(bl->lp, LP8788_BL_CONFIG, val); } -static void lp8788_pwm_ctrl(struct lp8788_bl *bl, int br, int max_br) -{ - unsigned int period; - unsigned int duty; - struct device *dev; - struct pwm_device *pwm; - - if (!bl->pdata) - return; - - period = bl->pdata->period_ns; - duty = br * period / max_br; - dev = bl->lp->dev; - - /* request PWM device with the consumer name */ - if (!bl->pwm) { - pwm = devm_pwm_get(dev, LP8788_DEV_BACKLIGHT); - if (IS_ERR(pwm)) { - dev_err(dev, "can not get PWM device\n"); - return; - } - - bl->pwm = pwm; - - /* - * FIXME: pwm_apply_args() should be removed when switching to - * the atomic PWM API. - */ - pwm_apply_args(pwm); - } - - pwm_config(bl->pwm, duty, period); - if (duty) - pwm_enable(bl->pwm); - else - pwm_disable(bl->pwm); -} - static int lp8788_bl_update_status(struct backlight_device *bl_dev) { struct lp8788_bl *bl = bl_get_data(bl_dev); - enum lp8788_bl_ctrl_mode mode = bl->mode; if (bl_dev->props.state & BL_CORE_SUSPENDED) bl_dev->props.brightness = 0; - if (is_brightness_ctrl_by_pwm(mode)) { - int brt = bl_dev->props.brightness; - int max = bl_dev->props.max_brightness; - - lp8788_pwm_ctrl(bl, brt, max); - } else if (is_brightness_ctrl_by_register(mode)) { - u8 brt = bl_dev->props.brightness; - - lp8788_write_byte(bl->lp, LP8788_BL_BRIGHTNESS, brt); - } + lp8788_write_byte(bl->lp, LP8788_BL_BRIGHTNESS, bl_dev->props.brightness); return 0; } @@ -187,30 +78,16 @@ static int lp8788_backlight_register(struct lp8788_bl *bl) { struct backlight_device *bl_dev; struct backlight_properties props; - struct lp8788_backlight_platform_data *pdata = bl->pdata; - int init_brt; - char *name; memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_PLATFORM; props.max_brightness = MAX_BRIGHTNESS; /* Initial brightness */ - if (pdata) - init_brt = min_t(int, pdata->initial_brightness, - props.max_brightness); - else - init_brt = 0; - - props.brightness = init_brt; + props.brightness = 0; /* Backlight device name */ - if (!pdata || !pdata->name) - name = DEFAULT_BL_NAME; - else - name = pdata->name; - - bl_dev = backlight_device_register(name, bl->lp->dev, bl, + bl_dev = backlight_device_register(DEFAULT_BL_NAME, bl->lp->dev, bl, &lp8788_bl_ops, &props); if (IS_ERR(bl_dev)) return PTR_ERR(bl_dev); @@ -230,16 +107,7 @@ static void lp8788_backlight_unregister(struct lp8788_bl *bl) static ssize_t lp8788_get_bl_ctl_mode(struct device *dev, struct device_attribute *attr, char *buf) { - struct lp8788_bl *bl = dev_get_drvdata(dev); - enum lp8788_bl_ctrl_mode mode = bl->mode; - char *strmode; - - if (is_brightness_ctrl_by_pwm(mode)) - strmode = "PWM based"; - else if (is_brightness_ctrl_by_register(mode)) - strmode = "Register based"; - else - strmode = "Invalid mode"; + const char *strmode = "Register based"; return scnprintf(buf, PAGE_SIZE, "%s\n", strmode); } @@ -266,8 +134,6 @@ static int lp8788_backlight_probe(struct platform_device *pdev) return -ENOMEM; bl->lp = lp; - if (lp->pdata) - bl->pdata = lp->pdata->bl_pdata; platform_set_drvdata(pdev, bl); diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h index 51b47966a04d..fd17bec2a33e 100644 --- a/include/linux/mfd/lp8788.h +++ b/include/linux/mfd/lp8788.h @@ -11,7 +11,6 @@ #define __MFD_LP8788_H__ #include -#include #include #define LP8788_DEV_BUCK "lp8788-buck" @@ -87,12 +86,6 @@ enum lp8788_charger_event { CHARGER_DETECTED, }; -enum lp8788_bl_ctrl_mode { - LP8788_BL_REGISTER_ONLY, - LP8788_BL_COMB_PWM_BASED, /* PWM + I2C, changed by PWM input */ - LP8788_BL_COMB_REGISTER_BASED, /* PWM + I2C, changed by I2C */ -}; - enum lp8788_bl_dim_mode { LP8788_DIM_EXPONENTIAL, LP8788_DIM_LINEAR, @@ -201,31 +194,6 @@ struct lp8788_charger_platform_data { enum lp8788_charger_event event); }; -/* - * struct lp8788_backlight_platform_data - * @name : backlight driver name. (default: "lcd-backlight") - * @initial_brightness : initial value of backlight brightness - * @bl_mode : brightness control by pwm or lp8788 register - * @dim_mode : dimming mode selection - * @full_scale : full scale current setting - * @rise_time : brightness ramp up step time - * @fall_time : brightness ramp down step time - * @pwm_pol : pwm polarity setting when bl_mode is pwm based - * @period_ns : platform specific pwm period value. unit is nano. - Only valid when bl_mode is LP8788_BL_COMB_PWM_BASED - */ -struct lp8788_backlight_platform_data { - char *name; - int initial_brightness; - enum lp8788_bl_ctrl_mode bl_mode; - enum lp8788_bl_dim_mode dim_mode; - enum lp8788_bl_full_scale_current full_scale; - enum lp8788_bl_ramp_step rise_time; - enum lp8788_bl_ramp_step fall_time; - enum pwm_polarity pwm_pol; - unsigned int period_ns; -}; - /* * struct lp8788_led_platform_data * @name : led driver name. (default: "keyboard-backlight") @@ -267,7 +235,6 @@ struct lp8788_vib_platform_data { * @buck2_dvs : configurations for buck2 dvs * @chg_pdata : platform data for charger driver * @alarm_sel : rtc alarm selection (1 or 2) - * @bl_pdata : configurable data for backlight driver * @led_pdata : configurable data for led driver * @vib_pdata : configurable data for vibrator driver * @adc_pdata : iio map data for adc driver @@ -289,9 +256,6 @@ struct lp8788_platform_data { /* rtc alarm */ enum lp8788_alarm_sel alarm_sel; - /* backlight */ - struct lp8788_backlight_platform_data *bl_pdata; - /* current sinks */ struct lp8788_led_platform_data *led_pdata; struct lp8788_vib_platform_data *vib_pdata;