diff mbox series

[v2,05/10] dt-bindings: iio: adc: adi,ad7606: add supply properties

Message ID 20240628-cleanup-ad7606-v2-5-96e02f90256d@baylibre.com
State Superseded
Headers show
Series iio: adc: ad7606: Improvements | expand

Commit Message

Guillaume Stols June 28, 2024, 2:48 p.m. UTC
Add voltage supplies

Signed-off-by: Guillaume Stols <gstols@baylibre.com>
---
 Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Jonathan Cameron June 29, 2024, 3:30 p.m. UTC | #1
On Fri, 28 Jun 2024 14:48:23 +0000
Guillaume Stols <gstols@baylibre.com> wrote:

> Add voltage supplies
> 
> Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Trivial comment inline. No need to reroll for that though.

> ---
>  Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> index 509970922cda..a1c38a5812f7 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> @@ -35,6 +35,15 @@ properties:
>  
>    avcc-supply: true
>  
> +  vdrive-supply:
> +    description:
> +      Determines the voltage level at which the interface logic pins will
> +      operate.
> +
> +  refin-supply:
> +    description:
> +      The voltage supply for optional external reference voltage.
> +
>    interrupts:
>      description:
>        The BUSY pin falling edge indicates that the conversion is over, and thus
> @@ -106,9 +115,11 @@ required:
>    - reg
>    - spi-cpha
>    - avcc-supply
> +  - vdrive-supply
>    - interrupts
>    - adi,conversion-start-gpios
>  
> +
Unrelated white space change.  Remember to check patches for these.
If whitespace changes are needed have an additional patch that just does
that.

>  allOf:
>    - $ref: /schemas/spi/spi-peripheral-props.yaml#
>  
> @@ -130,6 +141,7 @@ examples:
>              spi-cpha;
>  
>              avcc-supply = <&adc_vref>;
> +            vdrive-supply = <&vdd_supply>;
>  
>              interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
>              interrupt-parent = <&gpio>;
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 509970922cda..a1c38a5812f7 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -35,6 +35,15 @@  properties:
 
   avcc-supply: true
 
+  vdrive-supply:
+    description:
+      Determines the voltage level at which the interface logic pins will
+      operate.
+
+  refin-supply:
+    description:
+      The voltage supply for optional external reference voltage.
+
   interrupts:
     description:
       The BUSY pin falling edge indicates that the conversion is over, and thus
@@ -106,9 +115,11 @@  required:
   - reg
   - spi-cpha
   - avcc-supply
+  - vdrive-supply
   - interrupts
   - adi,conversion-start-gpios
 
+
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
@@ -130,6 +141,7 @@  examples:
             spi-cpha;
 
             avcc-supply = <&adc_vref>;
+            vdrive-supply = <&vdd_supply>;
 
             interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
             interrupt-parent = <&gpio>;