diff mbox series

[2/4] arm64: dts: qcom: sdm630: correct I2C8 pin functions

Message ID 20221006104104.171368-2-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series [1/4] arm64: dts: qcom: sdm630: add UART pin functions | expand

Commit Message

Krzysztof Kozlowski Oct. 6, 2022, 10:41 a.m. UTC
The I2C8 pins are split into i2c8_a (GPIO30 and GPIO31) and i2c8_b
(GPIO44 and GPIO52).  Correct the name of function for I2C8 pins.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Konrad Dybcio Oct. 7, 2022, 7:39 p.m. UTC | #1
On 6.10.2022 12:41, Krzysztof Kozlowski wrote:
> The I2C8 pins are split into i2c8_a (GPIO30 and GPIO31) and i2c8_b
> (GPIO44 and GPIO52).  Correct the name of function for I2C8 pins.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad
>  arch/arm64/boot/dts/qcom/sdm630.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index bc7c341e793c..796c19b9b2eb 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -885,14 +885,14 @@ i2c7_sleep: i2c7-sleep {
>  
>  			i2c8_default: i2c8-default {
>  				pins = "gpio30", "gpio31";
> -				function = "blsp_i2c8";
> +				function = "blsp_i2c8_a";
>  				drive-strength = <2>;
>  				bias-disable;
>  			};
>  
>  			i2c8_sleep: i2c8-sleep {
>  				pins = "gpio30", "gpio31";
> -				function = "blsp_i2c8";
> +				function = "blsp_i2c8_a";
>  				drive-strength = <2>;
>  				bias-pull-up;
>  			};
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index bc7c341e793c..796c19b9b2eb 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -885,14 +885,14 @@  i2c7_sleep: i2c7-sleep {
 
 			i2c8_default: i2c8-default {
 				pins = "gpio30", "gpio31";
-				function = "blsp_i2c8";
+				function = "blsp_i2c8_a";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
 			i2c8_sleep: i2c8-sleep {
 				pins = "gpio30", "gpio31";
-				function = "blsp_i2c8";
+				function = "blsp_i2c8_a";
 				drive-strength = <2>;
 				bias-pull-up;
 			};