@@ -18,37 +18,18 @@ int viai2c_wait_bus_not_busy(struct viai2c *i2c)
return 0;
}
-int viai2c_check_status(struct viai2c *i2c)
-{
- int ret = 0;
- unsigned long time_left;
-
- time_left = wait_for_completion_timeout(&i2c->complete,
- msecs_to_jiffies(500));
- if (!time_left)
- return -ETIMEDOUT;
-
- if (i2c->cmd_status & VIAI2C_ISR_NACK_ADDR)
- ret = -EIO;
-
- if (i2c->cmd_status & VIAI2C_ISR_SCL_TIMEOUT)
- ret = -ETIMEDOUT;
-
- return ret;
-}
-
static int viai2c_write(struct viai2c *i2c, struct i2c_msg *pmsg, int last)
{
u16 val, tcr_val = i2c->tcr;
- int ret;
- int xfer_len = 0;
+
+ i2c->last = last;
if (pmsg->len == 0) {
/*
* We still need to run through the while (..) once, so
* start at -1 and break out early from the loop
*/
- xfer_len = -1;
+ i2c->xfered_len = -1;
writew(0, i2c->base + VIAI2C_REG_CDR);
} else {
writew(pmsg->buf[0] & 0xFF, i2c->base + VIAI2C_REG_CDR);
@@ -73,42 +54,15 @@ static int viai2c_write(struct viai2c *i2c, struct i2c_msg *pmsg, int last)
writew(val, i2c->base + VIAI2C_REG_CR);
}
- while (xfer_len < pmsg->len) {
- ret = viai2c_check_status(i2c);
- if (ret)
- return ret;
-
- xfer_len++;
-
- val = readw(i2c->base + VIAI2C_REG_CSR);
- if (val & VIAI2C_CSR_RCV_NOT_ACK) {
- dev_dbg(i2c->dev, "write RCV NACK error\n");
- return -EIO;
- }
-
- if (pmsg->len == 0) {
- val = VIAI2C_CR_TX_END | VIAI2C_CR_CPU_RDY | VIAI2C_CR_ENABLE;
- writew(val, i2c->base + VIAI2C_REG_CR);
- break;
- }
-
- if (xfer_len == pmsg->len) {
- if (last != 1)
- writew(VIAI2C_CR_ENABLE, i2c->base + VIAI2C_REG_CR);
- } else {
- writew(pmsg->buf[xfer_len] & 0xFF, i2c->base + VIAI2C_REG_CDR);
- writew(VIAI2C_CR_CPU_RDY | VIAI2C_CR_ENABLE, i2c->base + VIAI2C_REG_CR);
- }
- }
+ if (!wait_for_completion_timeout(&i2c->complete, VIAI2C_TIMEOUT))
+ return -ETIMEDOUT;
- return 0;
+ return i2c->ret;
}
static int viai2c_read(struct viai2c *i2c, struct i2c_msg *pmsg)
{
u16 val, tcr_val = i2c->tcr;
- int ret;
- u32 xfer_len = 0;
val = readw(i2c->base + VIAI2C_REG_CR);
val &= ~(VIAI2C_CR_TX_END | VIAI2C_CR_RX_END);
@@ -133,21 +87,10 @@ static int viai2c_read(struct viai2c *i2c, struct i2c_msg *pmsg)
writew(val, i2c->base + VIAI2C_REG_CR);
}
- while (xfer_len < pmsg->len) {
- ret = viai2c_check_status(i2c);
- if (ret)
- return ret;
-
- pmsg->buf[xfer_len] = readw(i2c->base + VIAI2C_REG_CDR) >> 8;
- xfer_len++;
-
- val = readw(i2c->base + VIAI2C_REG_CR) | VIAI2C_CR_CPU_RDY;
- if (xfer_len == pmsg->len - 1)
- val |= VIAI2C_CR_RX_END;
- writew(val, i2c->base + VIAI2C_REG_CR);
- }
+ if (!wait_for_completion_timeout(&i2c->complete, VIAI2C_TIMEOUT))
+ return -ETIMEDOUT;
- return 0;
+ return i2c->ret;
}
int viai2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@@ -165,6 +108,9 @@ int viai2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
return ret;
}
+ i2c->msg = pmsg;
+ i2c->xfered_len = 0;
+
if (pmsg->flags & I2C_M_RD)
ret = viai2c_read(i2c, pmsg);
else
@@ -174,15 +120,76 @@ int viai2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
return (ret < 0) ? ret : i;
}
+/*
+ * Main process of the byte mode xfer
+ *
+ * Return value indicates whether the transfer is complete
+ * 1: all the data has been successfully transferred
+ * 0: there is still data that needs to be transferred
+ * -EIO: error occurred
+ */
+static int viai2c_irq_xfer(struct viai2c *i2c)
+{
+ u16 val;
+ struct i2c_msg *msg = i2c->msg;
+ u8 read = msg->flags & I2C_M_RD;
+ void __iomem *base = i2c->base;
+
+ if (read) {
+ msg->buf[i2c->xfered_len] = readw(base + VIAI2C_REG_CDR) >> 8;
+
+ val = readw(base + VIAI2C_REG_CR) | VIAI2C_CR_CPU_RDY;
+ if (i2c->xfered_len == msg->len - 2)
+ val |= VIAI2C_CR_RX_END;
+ writew(val, base + VIAI2C_REG_CR);
+ } else {
+ val = readw(base + VIAI2C_REG_CSR);
+ if (val & VIAI2C_CSR_RCV_NOT_ACK)
+ return -EIO;
+
+ /* I2C_SMBUS_QUICK */
+ if (msg->len == 0) {
+ val = VIAI2C_CR_TX_END | VIAI2C_CR_CPU_RDY | VIAI2C_CR_ENABLE;
+ writew(val, base + VIAI2C_REG_CR);
+ return 1;
+ }
+
+ if ((i2c->xfered_len + 1) == msg->len) {
+ if (!i2c->last)
+ writew(VIAI2C_CR_ENABLE, base + VIAI2C_REG_CR);
+ } else {
+ writew(msg->buf[i2c->xfered_len + 1] & 0xFF, base + VIAI2C_REG_CDR);
+ writew(VIAI2C_CR_CPU_RDY | VIAI2C_CR_ENABLE, base + VIAI2C_REG_CR);
+ }
+ }
+
+ i2c->xfered_len++;
+
+ return i2c->xfered_len == msg->len;
+}
+
static irqreturn_t viai2c_isr(int irq, void *data)
{
struct viai2c *i2c = data;
+ u8 status;
/* save the status and write-clear it */
- i2c->cmd_status = readw(i2c->base + VIAI2C_REG_ISR);
- writew(i2c->cmd_status, i2c->base + VIAI2C_REG_ISR);
+ status = readw(i2c->base + VIAI2C_REG_ISR);
+ writew(status, i2c->base + VIAI2C_REG_ISR);
+
+ i2c->ret = 0;
+ if (status & VIAI2C_ISR_NACK_ADDR)
+ i2c->ret = -EIO;
+
+ if (status & VIAI2C_ISR_SCL_TIMEOUT)
+ i2c->ret = -ETIMEDOUT;
+
+ if (!i2c->ret)
+ i2c->ret = viai2c_irq_xfer(i2c);
- complete(&i2c->complete);
+ /* All the data has been successfully transferred or error occurred */
+ if (i2c->ret)
+ complete(&i2c->complete);
return IRQ_HANDLED;
}
@@ -58,11 +58,13 @@ struct viai2c {
struct clk *clk;
u16 tcr;
int irq;
- u16 cmd_status;
+ u16 xfered_len;
+ struct i2c_msg *msg;
+ int ret;
+ bool last;
};
int viai2c_wait_bus_not_busy(struct viai2c *i2c);
-int viai2c_check_status(struct viai2c *i2c);
int viai2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num);
int viai2c_init(struct platform_device *pdev, struct viai2c **pi2c);