mbox series

[v2,0/3] Add support for Imagis IST3038

Message ID 20221118182103.3405-1-linmengbo0689@protonmail.com
Headers show
Series Add support for Imagis IST3038 | expand

Message

Lin, Meng-Bo Nov. 18, 2022, 6:21 p.m. UTC 
v2: Drop untested, wildcard ist30xxb

This series adds support for Imagis IST3038, which is a variants of
Imagis IST3038 IC. It has a different register map (labeled protocol b),
but otherwise it seems to be the same IC.
It is also possible to support various other Imagis ICs using protocol b,
such as (but not limited to) IST3044B, IST3026, IST3032, IST3026B,
IST3032B. However, most of them (all except IST3044B) use a different
coordinate format, so extra effort would be needed to support those.

Tested on Samsung Galaxy Core Prime and Grand Max.

Comments

Mattijs Korpershoek Nov. 30, 2022, 3:35 p.m. UTC | #1 
On Fri, Nov 18, 2022 at 18:21, "Lin, Meng-Bo" <linmengbo0689@protonmail.com> wrote:

> From: Markuss Broks <markuss.broks@gmail.com>
>
> Imagis IST3038 is a variant (firmware?) of Imagis IST3038 IC,
> add the compatible for it to the IST3038C bindings.
>
> Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
> [Change from IST3038B to IST3038]
> Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>

> ---
>  .../devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml   | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
> index e3a2b871e50c..a58c045d2ba1 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
> +++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
> @@ -18,6 +18,7 @@ properties:
>  
>    compatible:
>      enum:
> +      - imagis,ist3038
>        - imagis,ist3038c
>  
>    reg:
> -- 
> 2.30.2
Mattijs Korpershoek Nov. 30, 2022, 3:43 p.m. UTC | #2 
On Fri, Nov 18, 2022 at 18:21, "Lin, Meng-Bo" <linmengbo0689@protonmail.com> wrote:

> From: Markuss Broks <markuss.broks@gmail.com>
>
> Imagis IST3038 is another variant of Imagis IST3038 IC, which has
> a different register interface from IST3038C (possibly firmware defined).
>
> This should also work for IST3044B (though untested), however other
> variants using this interface/protocol(IST3026, IST3032, IST3026B,
> IST3032B) have a different format for coordinates, and they'd need
> additional effort to be supported by this driver.
>
> Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
> [Use IST3038C_REG_CHIPID_BASE]
> Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>

> ---
>  drivers/input/touchscreen/imagis.c | 62 ++++++++++++++++++++++++------
>  1 file changed, 51 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/input/touchscreen/imagis.c b/drivers/input/touchscreen/imagis.c
> index b667914a44f1..eb3b0684817f 100644
> --- a/drivers/input/touchscreen/imagis.c
> +++ b/drivers/input/touchscreen/imagis.c
> @@ -13,7 +13,8 @@
>  
>  #define IST3038C_HIB_ACCESS		(0x800B << 16)
>  #define IST3038C_DIRECT_ACCESS		BIT(31)
> -#define IST3038C_REG_CHIPID		0x40001000
> +#define IST3038C_REG_CHIPID_BASE	0x40001000
> +#define IST3038C_REG_CHIPID(base)	(base | IST3038C_DIRECT_ACCESS)
>  #define IST3038C_REG_HIB_BASE		0x30000100
>  #define IST3038C_REG_TOUCH_STATUS	(IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS)
>  #define IST3038C_REG_TOUCH_COORD	(IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS | 0x8)
> @@ -31,8 +32,24 @@
>  #define IST3038C_FINGER_COUNT_SHIFT	12
>  #define IST3038C_FINGER_STATUS_MASK	GENMASK(9, 0)
>  
> +#define IST30XX_REG_STATUS		0x20
> +#define IST30XXB_REG_CHIPID_BASE	0x40000000
> +#define IST30XX_WHOAMI			0x30003000
> +#define IST30XXA_WHOAMI			0x300a300a
> +#define IST30XXB_WHOAMI			0x300b300b
> +#define IST3038_WHOAMI			0x30383038
> +
> +struct imagis_properties {
> +	unsigned int interrupt_msg_cmd;
> +	unsigned int touch_coord_cmd;
> +	unsigned int chipid_base;
> +	unsigned int whoami_val;
> +	bool protocol_b;
> +};
> +
>  struct imagis_ts {
>  	struct i2c_client *client;
> +	const struct imagis_properties *tdata;
>  	struct input_dev *input_dev;
>  	struct touchscreen_properties prop;
>  	struct regulator_bulk_data supplies[2];
> @@ -84,8 +101,7 @@ static irqreturn_t imagis_interrupt(int irq, void *dev_id)
>  	int i;
>  	int error;
>  
> -	error = imagis_i2c_read_reg(ts, IST3038C_REG_INTR_MESSAGE,
> -				    &intr_message);
> +	error = imagis_i2c_read_reg(ts, ts->tdata->interrupt_msg_cmd, &intr_message);
>  	if (error) {
>  		dev_err(&ts->client->dev,
>  			"failed to read the interrupt message: %d\n", error);
> @@ -104,9 +120,13 @@ static irqreturn_t imagis_interrupt(int irq, void *dev_id)
>  	finger_pressed = intr_message & IST3038C_FINGER_STATUS_MASK;
>  
>  	for (i = 0; i < finger_count; i++) {
> -		error = imagis_i2c_read_reg(ts,
> -					    IST3038C_REG_TOUCH_COORD + (i * 4),
> -					    &finger_status);
> +		if (ts->tdata->protocol_b)
> +			error = imagis_i2c_read_reg(ts,
> +						    ts->tdata->touch_coord_cmd, &finger_status);
> +		else
> +			error = imagis_i2c_read_reg(ts,
> +						    ts->tdata->touch_coord_cmd + (i * 4),
> +						    &finger_status);
>  		if (error) {
>  			dev_err(&ts->client->dev,
>  				"failed to read coordinates for finger %d: %d\n",
> @@ -261,6 +281,12 @@ static int imagis_probe(struct i2c_client *i2c)
>  
>  	ts->client = i2c;
>  
> +	ts->tdata = device_get_match_data(dev);
> +	if (!ts->tdata) {
> +		dev_err(dev, "missing chip data\n");
> +		return -EINVAL;
> +	}
> +
>  	error = imagis_init_regulators(ts);
>  	if (error) {
>  		dev_err(dev, "regulator init error: %d\n", error);
> @@ -279,15 +305,13 @@ static int imagis_probe(struct i2c_client *i2c)
>  		return error;
>  	}
>  
> -	error = imagis_i2c_read_reg(ts,
> -			IST3038C_REG_CHIPID | IST3038C_DIRECT_ACCESS,
> -			&chip_id);
> +	error = imagis_i2c_read_reg(ts, IST3038C_REG_CHIPID(ts->tdata->chipid_base), &chip_id);
>  	if (error) {
>  		dev_err(dev, "chip ID read failure: %d\n", error);
>  		return error;
>  	}
>  
> -	if (chip_id != IST3038C_WHOAMI) {
> +	if (chip_id != ts->tdata->whoami_val) {
>  		dev_err(dev, "unknown chip ID: 0x%x\n", chip_id);
>  		return -EINVAL;
>  	}
> @@ -343,9 +367,25 @@ static int __maybe_unused imagis_resume(struct device *dev)
>  
>  static SIMPLE_DEV_PM_OPS(imagis_pm_ops, imagis_suspend, imagis_resume);
>  
> +static const struct imagis_properties imagis_3038_data = {
> +	.interrupt_msg_cmd = IST30XX_REG_STATUS,
> +	.touch_coord_cmd = IST30XX_REG_STATUS,
> +	.chipid_base = IST30XXB_REG_CHIPID_BASE,
> +	.whoami_val = IST3038_WHOAMI,
> +	.protocol_b = true,
> +};
> +
> +static const struct imagis_properties imagis_3038c_data = {
> +	.interrupt_msg_cmd = IST3038C_REG_INTR_MESSAGE,
> +	.touch_coord_cmd = IST3038C_REG_TOUCH_COORD,
> +	.chipid_base = IST3038C_REG_CHIPID_BASE,
> +	.whoami_val = IST3038C_WHOAMI,
> +};
> +
>  #ifdef CONFIG_OF
>  static const struct of_device_id imagis_of_match[] = {
> -	{ .compatible = "imagis,ist3038c", },
> +	{ .compatible = "imagis,ist3038", .data = &imagis_3038_data },
> +	{ .compatible = "imagis,ist3038c", .data = &imagis_3038c_data },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, imagis_of_match);
> -- 
> 2.30.2