| Message ID | 20240419123829.120396-1-kamel.bouhara@bootlin.com |
|---|---|
| Headers | show |
| Series | Input: Add TouchNetix axiom touchscreen driver | expand |
Le 2024-04-19 14:38, Kamel Bouhara a écrit : > Add a new driver for the TouchNetix's axiom family of touchscreen > controller. This driver only support i2c and can be later adapted for > SPI and USB support. > Hello Dmitry, I just saw you are still applying patch and I wanted to know if this series could be merged as well ? Kamel > -- > Changes in v11: > - Fix regulators name to match dt-binding > - Enable regulators before reset is asserted > > Changes in v10: > - Set regulators as required > - Enable power supply before reset > - Fix ref count due to regulator requested twice > - Rebase on v6.9-rc4 > > Changes in v9: > - Fix issue reported in > https://lore.kernel.org/oe-kbuild-all/202402201157.BKo97uWl-lkp@intel.com/ > - Rebase on v6.8-rc2 > > Changes in v8: > - Fix missing call to input_report_slot_state() > - Fix issue reported in > https://lore.kernel.org/oe-kbuild-all/202402020623.8T1Ah513-lkp@intel.com/ > > Changes in v7: > - Remove startup time from dt-binding > - Fix usage table not correctly populated > > Changes in v6: > - Fix missing unevaluatedProperties.in dt-binding > - Use __le16 to correctly deal with device endianness > - Use standart kernel types s/char/u8/ > - Use regmap api as driver might support spi later > - Use get_unaligned_le16() for the sake of clarity > - Use devm_regulator_enable_optional() > > Changes in v5: > - Fix wrong message constructed in axiom_i2c_read > - Delay required between i2c reads is >= 250us > - Do not split report reading in two phases as we'll > have to wait 500us > - Use lower-case in properties names > - Make regulators properties are required in dt-binding > - Fix bug report: > https://lore.kernel.org/lkml/202312051457.y3N1q3sZ-lkp@intel.com/ > - Fix bug report: > https://lore.kernel.org/lkml/6f8e3b64-5b21-4a50-8680-063ef7a93bdb@suswa.mountain/ > > Changes in v4: > - Cleanup unused headers and macros > - Use standard kernel type > - Namespace structures and functions > - Use packed struct when possible to avoid bitfield operators > - Fix missing break when address is found in > axiom_populate_target_address() > - Split reads in two steps for the reports, first length then report > itself so we only read required bytes > - Get poll-interval from devicetree > - Add VDDI/VDDA regulators > - Add a startup delay of 110 ms required after VDDA/VDDI is applied > - Remove axiom_i2c_write() as it is no more used > > Changes in v3: > - Remove irq-gpios property in dt-binding > - Use a generic node name > - Fix issues reported in > https://lore.kernel.org/oe-kbuild-all/202310100300.oAC2M62R-lkp@intel.com/ > > Changes in v2: > - Add device tree binding documentation > - Move core functions in axiom_i2c as we only care about i2c support > now > - Use static function when required > - Use syntax dev_err_probe() > - Add an hardware based reset > > > Kamel Bouhara (3): > dt-bindings: vendor-prefixes: Add TouchNetix AS > dt-bindings: input: Add TouchNetix axiom touchscreen > Input: Add TouchNetix axiom i2c touchscreen driver > > .../input/touchscreen/touchnetix,ax54a.yaml | 62 ++ > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > MAINTAINERS | 8 + > drivers/input/touchscreen/Kconfig | 12 + > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/touchnetix_axiom.c | 657 ++++++++++++++++++ > 6 files changed, 742 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml > create mode 100644 drivers/input/touchscreen/touchnetix_axiom.c > > -- > 2.25.1