@@ -22,9 +22,13 @@
#define ACEL_EN BIT(0)
#define GYRO_EN BIT(1)
-#define MAGNO_EN BIT(2)
+#define MAGNO_EN BIT(2)
#define ALS_EN BIT(19)
+static int sensor_mask_override = -1;
+module_param_named(sensor_mask, sensor_mask_override, int, 0444);
+MODULE_PARM_DESC(sensor_mask, "override the detected sensors mask");
+
void amd_start_sensor(struct amd_mp2_dev *privdata, struct amd_mp2_sensor_info info)
{
union sfh_cmd_param cmd_param;
@@ -78,8 +82,12 @@ int amd_mp2_get_sensor_num(struct amd_mp2_dev *privdata, u8 *sensor_id)
int activestatus, num_of_sensors = 0;
u32 activecontrolstatus;
- activecontrolstatus = readl(privdata->mmio + AMD_P2C_MSG3);
- activestatus = activecontrolstatus >> 4;
+ if (sensor_mask_override >= 0) {
+ activestatus = sensor_mask_override;
+ } else {
+ activecontrolstatus = readl(privdata->mmio + AMD_P2C_MSG3);
+ activestatus = activecontrolstatus >> 4;
+ }
if (ACEL_EN & activestatus)
sensor_id[num_of_sensors++] = accel_idx;
Add a sensor_mask module parameter which can be used to override the sensor-mask read from the activestatus bits of the AMD_P2C_MSG3 registers. Some BIOS-es do not program the activestatus bits, leading to the AMD-SFH driver not registering any HID devices even though the laptop in question does actually have sensors. While at it also fix the wrong indentation of the MAGNO_EN define. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199715 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1651886 Fixes: 4f567b9f8141 ("SFH: PCIe driver to add support of AMD sensor fusion hub") Suggested-by: Richard Neumann <mail@richard-neumann.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)