Patch Metrics

Linaro contributions to linux-kernel.

Patches per month: Submitted Accepted

Project Details

List addresslinux-kernel@vger.kernel.org
Source treegit://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Last commit scanneda3a80255d58d0f0d304ba877ae0313a264973a70
Show patches with: Submitter = Roger Quadros       |    State = Action Required       |    Archived = No       |   130 patches
« 1 2 »
Patch Series S/W/F Date Submitter Delegate State
[3/3] arm64: dts: ti: k3-am654-base-board: enable USB1 Untitled series #17737 0 0 0 2019-01-11 Roger Quadros New
[2/3] arm64: dts: ti: k3-am6: add USB support Untitled series #17737 0 0 0 2019-01-11 Roger Quadros New
[v2,3/3] usb: dwc3: keystone: Add support for ti,am654-dwc3 Untitled series #17698 0 0 0 2019-01-10 Roger Quadros New
[v2,2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support Untitled series #17698 0 0 0 2019-01-10 Roger Quadros New
[1/3] usb: dwc3: gadget: Fix OTG events when gadget driver isn't loaded [1/3] usb: dwc3: gadget: Fix OTG events when gadget driver isn't loaded 0 0 0 2018-12-05 Roger Quadros New
[4/4] phy: ti: usb2: Add support for AM654 USB2 PHY [1/4] phy: ti: usb2: Fix logic on -EPROBE_DEFER 0 0 0 2018-12-05 Roger Quadros New
[3/4] dt-bindings: phy: ti: Add support for AM654x USB2 PHY [1/4] phy: ti: usb2: Fix logic on -EPROBE_DEFER 0 0 0 2018-12-05 Roger Quadros New
[2/4] phy: ti: Don't depend on OMAP_OCP2SCP [1/4] phy: ti: usb2: Fix logic on -EPROBE_DEFER 0 0 0 2018-12-05 Roger Quadros New
[1/4] phy: ti: usb2: Fix logic on -EPROBE_DEFER [1/4] phy: ti: usb2: Fix logic on -EPROBE_DEFER 0 0 0 2018-12-05 Roger Quadros New
[16/16] remoteproc/pru: Add support for INTC Interrupt map resource [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[15/16] remoteproc/pru: add support for parsing pru interrupt mapping from DT [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[14/16] remoteproc/pru: configure firmware based on client setup [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[13/16] remoteproc/pru: add support for configuring GPMUX based on client setup [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[12/16] dt-bindings: remoteproc: ti-pruss: Document application node bindings [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[11/16] soc: ti: pruss: add helper functions to set GPI mode, MII_RT_event and XFR [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[10/16] remoteproc/pru: add pru_rproc_get_id() API to retrieve the PRU id [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[08/16] remoteproc/pru: Add pru_rproc_set_ctable() function [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[07/16] remoteproc/pru: Add support for virtio rpmsg stack [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[06/16] dt-bindings: remoteproc: ti-pruss: Update bindings for supporting rpmsg [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[05/16] remoteproc/pru: Add pru-specific debugfs support [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[04/16] remoteproc/pru: Add PRU remoteproc driver [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[02/16] remoteproc: Add a rproc_set_firmware() API [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter [01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter 0 0 0 2018-11-26 Roger Quadros New
[17/17] ARM: dts: am335x-*: Enable PRU-ICSS nodes Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[16/17] ARM: dts: AM33xx: Add PRU system events for virtio Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[15/17] ARM: dts: AM33xx: Add the PRU-ICSS DT nodes Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[14/17] ARM: OMAP2+: use pdata quirks for PRUSS reset lines on AM335x Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[13/17] soc: ti: pruss: export pruss_intc_configure/unconfigure APIs Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[12/17] soc: ti: pruss: add pruss_cfg_read()/update() API Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[11/17] soc: ti: pruss: add pruss_get()/put() API Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[10/17] soc: ti: pruss_intc: Add API to trigger a PRU sysevent Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[09/17] soc: ti: pruss: add pruss_{request,release}_mem_region() API Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[08/17] soc: ti: pruss: Add a PRUSS irqchip driver for PRUSS interrupts Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[07/17] soc: ti: pruss: enable OCP master ports in SYSCFG always Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[06/17] soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[05/17] soc: ti: pruss: Configure SYSCFG properly during probe/remove Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[04/17] soc: ti: pruss: Fix system suspend/MStandby config issues Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[03/17] soc: ti: pruss: Add pruss_soc_bus platform driver Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[02/17] soc: ti: pruss: Define platform data for PRUSS bus driver Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
[01/17] dt-bindings: remoteproc: Add TI PRUSS bindings Add support for TI PRU ICSS 0 0 0 2018-11-22 Roger Quadros New
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume 0 0 0 2018-02-27 Roger Quadros New
[4/4] ARM: dts: am43xx: Enable dual-role mode for USB1 usb: dwc3: Add dual-role support using OTG core 0 0 0 2018-01-22 Roger Quadros New
[2/2] usb: dwc3: drd: Fix lock-up on ID change during system suspend/resume usb: dwc3: Fix dual role during system suspend/resume 0 0 0 2018-01-22 Roger Quadros New
[v2] usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume [v2] usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume 0 0 0 2018-01-11 Roger Quadros New
usb: dwc3: core: Don't try to get PHYs during suspend/resume usb: dwc3: core: Don't try to get PHYs during suspend/resume 0 0 0 2018-01-10 Roger Quadros New
[v2] usb: dwc3: gadget: Fix .udc_set_speed() [v2] usb: dwc3: gadget: Fix .udc_set_speed() 0 0 0 2017-10-31 Roger Quadros New
[v2] mtd: nand: omap2: Fix subpage write [v2] mtd: nand: omap2: Fix subpage write 0 0 0 2017-10-20 Roger Quadros New
[v2] phy: ti-pipe3: Use TRM recommended settings for SATA DPLL 0 0 0 2017-08-07 Roger Quadros New
[v3,net-next] mdio_bus: Issue GPIO RESET to PHYs. 0 0 0 2017-04-20 Roger Quadros New
mdio_bus: Issue GPIO RESET to PHYs. 0 0 0 2017-04-19 Roger Quadros New
net: davinci_mdio: add GPIO reset logic 0 0 0 2017-04-05 Roger Quadros New
[v4,3/3] usb: dwc3: Add dual-role support Untitled series #1006 0 0 0 2017-04-04 Roger Quadros New
[v3,2/3] usb: dwc3: make role-switching work with debugfs/mode usb: dwc3: dual-role support 0 0 0 2017-04-03 Roger Quadros New
[v3,1/3] usb: udc: allow adding and removing the same gadget device usb: dwc3: dual-role support 0 0 0 2017-04-03 Roger Quadros New
[v3,1/2] net: phy: Fix PHY AN done state machine for interrupt driven PHYs [v3,1/2] net: phy: Fix PHY AN done state machine for interrupt driven PHYs 0 0 0 2017-03-27 Roger Quadros New
[RFC] net: phy: Don't miss phy_suspend() on PHY_HALTED for PHYs with interrupts 0 0 0 2017-03-15 Roger Quadros New
[1/4] ARM: OMAP2+: omap_hwmod: provide space for more hwmod flags [1/4] ARM: OMAP2+: omap_hwmod: provide space for more hwmod flags 0 0 0 2017-03-13 Roger Quadros New
[v2,4/4] usb: dwc3: Workaround for super-speed host on dra7 in dual-role mode usb: dwc3: dual-role support 0 0 0 2017-02-16 Roger Quadros New
[v2,3/4] usb: dwc3: add dual-role support usb: dwc3: dual-role support 0 0 0 2017-02-16 Roger Quadros New
[v2,1/4] usb: dwc3: core.h: add some register definitions usb: dwc3: dual-role support 0 0 0 2017-02-16 Roger Quadros New
[1/3] usb: dwc3-omap: Fix missing break in dwc3_omap_set_mailbox() usb: dwc3: trivial fixes. 0 0 0 2017-02-15 Roger Quadros New
[8/8] ARM: dts: am57xx-idk: Enable dual-role mode for USB2 usb: dwc3: add dual-role support 0 0 0 2017-01-23 Roger Quadros New
[7/8] ARM: dts: am43xx: Enable dual-role mode for USB1 usb: dwc3: add dual-role support 0 0 0 2017-01-23 Roger Quadros New
[1/8] usb: otg-fsm: Prevent build warning "VDBG" redefined usb: dwc3: add dual-role support 0 0 0 2017-01-23 Roger Quadros New
extcon: palmas: Fail gracefully if invalid configuration 0 0 0 2016-12-07 Roger Quadros New
[v3,1/3] usb: xhci: add quirk flag for broken PED bits 0 0 0 2016-11-21 Roger Quadros New
[3/3] usb: dwc3: host: pass quirk-broken-port-ped property for known broken revisions 0 0 0 2016-11-17 Roger Quadros New
[2/3] usb: host: xhci-plat: enable BROKEN_PED quirk if platform requested 0 0 0 2016-11-17 Roger Quadros New
[v3] usb: core: setup dma_pfn_offset for USB devices and, interfaces 0 0 0 2016-09-12 Roger Quadros New
[v2] usb: core: setup dma_pfn_offset for USB devices and, interfaces 0 0 0 2016-09-12 Roger Quadros New
dt-bindings: GPIO: Add TPIC2810 binding 0 0 0 2016-08-23 Roger Quadros New
[3/3] ARM: dts: dra7: workaround silicon limitation i845 0 0 0 2016-08-23 Roger Quadros New
[2/3] dt-bindings: phy: ti: add documentation for ti,dra7x-usb2 0 0 0 2016-08-23 Roger Quadros New
[1/3] phy: omap-usb2: support suspend/resume 0 0 0 2016-08-23 Roger Quadros New
usb: host: Allow EHCI_OMAP to be built-in when USB_GADGET is 'm' 0 0 0 2016-06-30 Roger Quadros New
[v11,09/14] usb: of: add an API to get OTG device from USB controller node 0 0 0 2016-06-13 Roger Quadros New
[v11,08/14] usb: otg: add OTG/dual-role core 0 0 0 2016-06-13 Roger Quadros New
[v7,4/4] ARM: dts: am43xx: Enable dual-role on USB1 0 0 0 2016-06-10 Roger Quadros New
[v7,3/4] ARM: dts: dra7*-evm: Enable dual-role for usb1 0 0 0 2016-06-10 Roger Quadros New
[v7,2/4] usb: dwc3: add dual-role support 0 0 0 2016-06-10 Roger Quadros New
[v10,12/14] usb: hcd: Adapt to OTG core 0 0 0 2016-06-10 Roger Quadros New
[v10,11/14] usb: otg: use dev_vdbg() instead of VDBG() 0 0 0 2016-06-10 Roger Quadros New
[v10,07/14] usb: otg: get rid of CONFIG_USB_OTG_FSM in favour of CONFIG_USB_OTG 0 0 0 2016-06-10 Roger Quadros New
[v10,05/14] usb: otg-fsm: move host controller operations into usb_otg->hcd_ops 0 0 0 2016-06-10 Roger Quadros New
[v10,04/14] usb: otg-fsm: use usb_otg wherever possible 0 0 0 2016-06-10 Roger Quadros New
[v10,03/14] usb: hcd.h: Add OTG to HCD interface 0 0 0 2016-06-10 Roger Quadros New
[v2] usb: dwc3: fix runtime PM in error path 0 0 0 2016-06-10 Roger Quadros New
usb: dwc3: fix runtime PM in error path 0 0 0 2016-06-10 Roger Quadros New
[v10,08/14] usb: otg: add OTG/dual-role core 0 0 0 2016-06-09 Roger Quadros New
[v9,14/14] usb: host: xhci-plat: Add otg device to platform data 0 0 0 2016-06-08 Roger Quadros New
[v9,13/14] usb: gadget: udc: adapt to OTG core 0 0 0 2016-06-08 Roger Quadros New
[v9,06/14] usb: gadget.h: Add OTG to gadget interface 0 0 0 2016-06-08 Roger Quadros New
[v9,01/14] usb: hcd: Initialize hcd->flags to 0 0 0 0 2016-06-08 Roger Quadros New
[v9,5/5] usb: dwc3: core: cleanup IRQ resources 0 0 0 2016-06-01 Roger Quadros New
[v8,14/14] usb: host: xhci-plat: Add otg device to platform data 0 0 0 2016-05-13 Roger Quadros New
[v8,13/14] usb: gadget: udc: adapt to OTG core 0 0 0 2016-05-13 Roger Quadros New
mtd: nand: ratelimit ecc error message 0 0 0 2016-05-12 Roger Quadros New
[v8,5/5] usb: dwc3: core: cleanup IRQ resources 0 0 0 2016-05-11 Roger Quadros New
[v7,5/5] usb: dwc3: core: cleanup IRQ resources 0 0 0 2016-05-10 Roger Quadros New
[v7,2/5] usb: dwc3: omap: Mark the interrupt handler as shared 0 0 0 2016-05-10 Roger Quadros New
« 1 2 »