diff mbox series

[v3,5/7] arm64: dts: hisilicon: poplar: Standardize LED labels and triggers

Message ID 20181029094245.7886-6-manivannan.sadhasivam@linaro.org
State New
Headers show
Series [v3,1/7] arm64: dts: rockchip: ficus: Add on-board LED support | expand

Commit Message

Manivannan Sadhasivam Oct. 29, 2018, 9:42 a.m. UTC 
For all 96Boards, the following standard is used for onboard LEDs.

green:user1  default-trigger: heartbeat
green:user2  default-trigger: mmc0/disk-activity(onboard-storage)
green:user3  default-trigger: mmc1 (SD-card)
green:user4  default-trigger: none, panic-indicator
yellow:wlan  default-trigger: phy0tx
blue:bt      default-trigger: hci0-power

So lets adopt the same for Poplar, which is one of the 96Boards
Enterprise edition platform.

Due to absence of WLAN and BT support, corresponding LED nodes are not
considered.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

---
 .../arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
index d30f6eb8a5ee..32716c96b457 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
@@ -35,30 +35,31 @@ 
 		compatible = "gpio-leds";
 
 		user-led0 {
-			label = "USER-LED0";
+			label = "green:user1";
 			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		user-led1 {
-			label = "USER-LED1";
+			label = "green:user2";
 			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		user-led2 {
-			label = "USER-LED2";
+			label = "green:user3";
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
+			linux,default-trigger = "mmc1";
 			default-state = "off";
 		};
 
 		user-led3 {
-			label = "USER-LED3";
+			label = "green:user4";
 			gpios = <&gpio10 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "cpu0";
+			linux,default-trigger = "none";
+			panic-indicator;
 			default-state = "off";
 		};
 	};