diff mbox series

[net-next,v2,09/13] leds: trigger: netdev: validate configured netdev

Message ID 20230525145401.27007-10-ansuelsmth@gmail.com
State Superseded
Headers show
Series leds: introduce new LED hw control APIs | expand

Commit Message

Christian Marangi May 25, 2023, 2:53 p.m. UTC 
From: Andrew Lunn <andrew@lunn.ch>

The netdev which the LED should blink for is configurable in
/sys/class/led/foo/device_name. Ensure when offloading that the
configured netdev is the same as the netdev the LED is associated
with. If it is not, only perform software blinking.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/leds/trigger/ledtrig-netdev.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index 8d6381415208..5b59441fc415 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -108,6 +108,24 @@  static bool supports_hw_control(struct led_classdev *led_cdev)
 	return !strcmp(led_cdev->hw_control_trigger, led_cdev->trigger->name);
 }
 
+/*
+ * Validate the configured netdev is the same as the one associated with
+ * the LED driver in hw control.
+ */
+static bool validate_net_dev(struct led_classdev *led_cdev,
+			     struct net_device *net_dev)
+{
+	struct device *dev = led_cdev->hw_control_get_device(led_cdev);
+	struct net_device *ndev;
+
+	if (!dev)
+		return false;
+
+	ndev = to_net_dev(dev);
+
+	return ndev == net_dev;
+}
+
 static bool can_hw_control(struct led_netdev_data *trigger_data)
 {
 	unsigned int interval = atomic_read(&trigger_data->interval);
@@ -129,9 +147,11 @@  static bool can_hw_control(struct led_netdev_data *trigger_data)
 	/*
 	 * net_dev must be set with hw control, otherwise no
 	 * blinking can be happening and there is nothing to
-	 * offloaded.
+	 * offloaded. Additionally, for hw control to be
+	 * valid, the configured netdev must be the same as
+	 * netdev associated to the LED.
 	 */
-	if (!trigger_data->net_dev)
+	if (!validate_net_dev(led_cdev, trigger_data->net_dev))
 		return false;
 
 	/* Check if the requested mode is supported */