@@ -217,6 +217,7 @@ config LEDS_TURRIS_OMNIA
depends on I2C
depends on MACH_ARMADA_38X || COMPILE_TEST
depends on OF
+ depends on TURRIS_OMNIA_MCU
select LEDS_TRIGGERS
help
This option enables basic support for the LEDs found on the front
@@ -2,7 +2,7 @@
/*
* CZ.NIC's Turris Omnia LEDs driver
*
- * 2020, 2023 by Marek Behún <kabel@kernel.org>
+ * 2020, 2023, 2024 by Marek Behún <kabel@kernel.org>
*/
#include <linux/i2c.h>
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
+#include <linux/turris-omnia-mcu-interface.h>
#include "leds.h"
#define OMNIA_BOARD_LEDS 12
@@ -57,66 +58,21 @@ struct omnia_leds {
struct omnia_led leds[];
};
-static int omnia_cmd_write_u8(const struct i2c_client *client, u8 cmd, u8 val)
+static int omnia_cmd_set_color(const struct i2c_client *client, u8 led, u8 r, u8 g, u8 b)
{
- u8 buf[2] = { cmd, val };
- int ret;
-
- ret = i2c_master_send(client, buf, sizeof(buf));
+ u8 buf[5] = { CMD_LED_COLOR, led, r, g, b };
- return ret < 0 ? ret : 0;
-}
-
-static int omnia_cmd_read_raw(struct i2c_adapter *adapter, u8 addr, u8 cmd,
- void *reply, size_t len)
-{
- struct i2c_msg msgs[2];
- int ret;
-
- msgs[0].addr = addr;
- msgs[0].flags = 0;
- msgs[0].len = 1;
- msgs[0].buf = &cmd;
- msgs[1].addr = addr;
- msgs[1].flags = I2C_M_RD;
- msgs[1].len = len;
- msgs[1].buf = reply;
-
- ret = i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs));
- if (likely(ret == ARRAY_SIZE(msgs)))
- return 0;
- else if (ret < 0)
- return ret;
- else
- return -EIO;
-}
-
-static int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd)
-{
- u8 reply;
- int err;
-
- err = omnia_cmd_read_raw(client->adapter, client->addr, cmd, &reply, 1);
- if (err)
- return err;
-
- return reply;
+ return omnia_cmd_write(client, buf, sizeof(buf));
}
static int omnia_led_send_color_cmd(const struct i2c_client *client,
struct omnia_led *led)
{
- char cmd[5];
int ret;
- cmd[0] = CMD_LED_COLOR;
- cmd[1] = led->reg;
- cmd[2] = led->subled_info[0].brightness;
- cmd[3] = led->subled_info[1].brightness;
- cmd[4] = led->subled_info[2].brightness;
-
/* Send the color change command */
- ret = i2c_master_send(client, cmd, 5);
+ ret = omnia_cmd_set_color(client, led->reg, led->subled_info[0].brightness,
+ led->subled_info[1].brightness, led->subled_info[2].brightness);
if (ret < 0)
return ret;
@@ -352,14 +308,14 @@ static ssize_t brightness_show(struct device *dev, struct device_attribute *a,
char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
- int ret;
-
- ret = omnia_cmd_read_u8(client, CMD_LED_GET_BRIGHTNESS);
+ u8 reply;
+ int err;
- if (ret < 0)
- return ret;
+ err = omnia_cmd_read_u8(client, CMD_LED_GET_BRIGHTNESS, &reply);
+ if (err < 0)
+ return err;
- return sysfs_emit(buf, "%d\n", ret);
+ return sysfs_emit(buf, "%d\n", reply);
}
static ssize_t brightness_store(struct device *dev, struct device_attribute *a,
@@ -386,17 +342,16 @@ static ssize_t gamma_correction_show(struct device *dev,
{
struct i2c_client *client = to_i2c_client(dev);
struct omnia_leds *leds = i2c_get_clientdata(client);
- int ret;
+ u8 reply = 0;
+ int err;
if (leds->has_gamma_correction) {
- ret = omnia_cmd_read_u8(client, CMD_GET_GAMMA_CORRECTION);
- if (ret < 0)
- return ret;
- } else {
- ret = 0;
+ err = omnia_cmd_read_u8(client, CMD_GET_GAMMA_CORRECTION, &reply);
+ if (err < 0)
+ return err;
}
- return sysfs_emit(buf, "%d\n", !!ret);
+ return sysfs_emit(buf, "%d\n", !!reply);
}
static ssize_t gamma_correction_store(struct device *dev,
@@ -429,24 +384,26 @@ ATTRIBUTE_GROUPS(omnia_led_controller);
static int omnia_mcu_get_features(const struct i2c_client *client)
{
+ struct i2c_client mcu_client = *client;
u16 reply;
int err;
- err = omnia_cmd_read_raw(client->adapter, OMNIA_MCU_I2C_ADDR,
- CMD_GET_STATUS_WORD, &reply, sizeof(reply));
+ /* We have to read features from different I2C address */
+ mcu_client.addr = OMNIA_MCU_I2C_ADDR;
+
+ err = omnia_cmd_read_u16(&mcu_client, CMD_GET_STATUS_WORD, &reply);
if (err)
return err;
/* Check whether MCU firmware supports the CMD_GET_FEAUTRES command */
- if (!(le16_to_cpu(reply) & STS_FEATURES_SUPPORTED))
+ if (!(reply & STS_FEATURES_SUPPORTED))
return 0;
- err = omnia_cmd_read_raw(client->adapter, OMNIA_MCU_I2C_ADDR,
- CMD_GET_FEATURES, &reply, sizeof(reply));
+ err = omnia_cmd_read_u16(&mcu_client, CMD_GET_FEATURES, &reply);
if (err)
return err;
- return le16_to_cpu(reply);
+ return reply;
}
static int omnia_leds_probe(struct i2c_client *client)
@@ -510,20 +467,11 @@ static int omnia_leds_probe(struct i2c_client *client)
static void omnia_leds_remove(struct i2c_client *client)
{
- u8 buf[5];
-
/* put all LEDs into default (HW triggered) mode */
- omnia_cmd_write_u8(client, CMD_LED_MODE,
- CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
+ omnia_cmd_write_u8(client, CMD_LED_MODE, CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
/* set all LEDs color to [255, 255, 255] */
- buf[0] = CMD_LED_COLOR;
- buf[1] = OMNIA_BOARD_LEDS;
- buf[2] = 255;
- buf[3] = 255;
- buf[4] = 255;
-
- i2c_master_send(client, buf, 5);
+ omnia_cmd_set_color(client, OMNIA_BOARD_LEDS, 255, 255, 255);
}
static const struct of_device_id of_omnia_leds_match[] = {
Use the MCU command execution functions from the MCU driver instead of the ad-hoc implementation in the LED driver. This allows as to drop the LED driver implementation, which is a duplicate. Signed-off-by: Marek Behún <kabel@kernel.org> --- drivers/leds/Kconfig | 1 + drivers/leds/leds-turris-omnia.c | 110 ++++++++----------------------- 2 files changed, 30 insertions(+), 81 deletions(-)