| Message ID | 20230914-rockchip-rga-multiplanar-v1-0-abfd77260ae3@pengutronix.de |
|---|---|
| Headers | show |
| Series | media: rockchip: rga: add support for multi-planar formats | expand |
On Mon, 25 Sep 2023 09:45:10 +0200, Hans Verkuil wrote: > On 14/09/2023 14:40, Michael Tretter wrote: > > This series adds support for the V4L2 multi-planar API to the Rockchip > > RGA driver. Once the RGA driver supports the multi-planar API, it is > > easier to share buffers with other V4L2 drivers that also support the > > multi-planar API and may not expose planar formats with contiguous > > planes. > > > > With non-contiguous planes, the U and V planes may not start at the same > > offset as with the continuous planes. Therefore, the RGA driver cannot > > rely on its calculation of the plane offsets based on the format and > > frame size anymore, but must remember the offsets when it created the > > mapping. Therefore, I also reworked how the DMA mapping is handled. > > > > As a bonus, the RGA driver should now work correctly on devices with > > more than 4 GB of memory. Video buffers should now be allocated within > > the 4 GB boundary and an import of buffers that have higher addresses > > into the driver should fail. > > > > Patch 1 fixes the swizzling of RGA formats. While testing all formats of > > the driver on rk3568, I discovered that the color channels of the RGB > > formats are wrong when converting to NV12. I didn't test this on other > > SoCs with an RGA and I am not sure, if they behave differently regarding > > the color channels. Please report, if this breaks the color conversion > > on other SoCs, and I will make this SoC-specific. > > > > Patches 2 to 6 are the rework the DMA descriptor handling for the RGA > > MMU. The patches clean up, how the driver uses the DMA API, and make the > > creation of the descriptor list more explicit. Furthermore, the driver > > is changed to keep the mapping per video buffer instead of using a > > single mapping that is updated with every buffer. > > > > Patches 7 to 11 prepare the driver for the multi-planar API including a > > cleanup of the format handling in the buffer, and finally switch to the > > multi-planar API. > > > > Patch 12 updates the code that creates the DMA-descriptor mapping to > > correctly handle buffers with multiple planes. The driver has to iterate > > all planes and make them the continuous for the RGA. > > > > Patch 13 enables the NV12M format, which is the multi-planar variant of > > the NV12 format. > > I get these smatch warnings for this series: > > drivers/media/platform/rockchip/rga/rga-hw.c: In function 'rga_get_addr_offset': > drivers/media/platform/rockchip/rga/rga-hw.c:46:65: warning: variable 'uv_factor' set but not used [-Wunused-but-set-variable] > 46 | y_div = 0, uv_stride = 0, pixel_width = 0, uv_factor = 0; > | ^~~~~~~~~ > drivers/media/platform/rockchip/rga/rga-buf.c:129 rga_buf_prepare() warn: unsigned 'ret' is never less than zero. Thanks, I will run smatch on the series and send a v2. Michael > > Regards, > > Hans > > > > > Michael > > > > Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> > > --- > > Michael Tretter (13): > > media: rockchip: rga: fix swizzling for RGB formats > > media: rockchip: rga: extract helper to fill descriptors > > media: rockchip: rga: allocate DMA descriptors per buffer > > media: rockchip: rga: split src and dst buffer setup > > media: rockchip: rga: pre-calculate plane offsets > > media: rockchip: rga: set dma mask to 32 bits > > media: rockchip: rga: use clamp() to clamp size to limits > > media: rockchip: rga: use pixelformat to find format > > media: rockchip: rga: add local variable for pix_format > > media: rockchip: rga: use macros for testing buffer type > > media: rockchip: rga: switch to multi-planar API > > media: rockchip: rga: rework buffer handling for multi-planar formats > > media: rockchip: rga: add NV12M support > > > > drivers/media/platform/rockchip/rga/rga-buf.c | 166 ++++++++++++++++------- > > drivers/media/platform/rockchip/rga/rga-hw.c | 143 +++++++++++++------- > > drivers/media/platform/rockchip/rga/rga.c | 187 ++++++++++++-------------- > > drivers/media/platform/rockchip/rga/rga.h | 35 ++++- > > 4 files changed, 329 insertions(+), 202 deletions(-) > > --- > > base-commit: 0bb80ecc33a8fb5a682236443c1e740d5c917d1d > > change-id: 20230914-rockchip-rga-multiplanar-0d7c79b1ba93 > > > > Best regards, > >
This series adds support for the V4L2 multi-planar API to the Rockchip RGA driver. Once the RGA driver supports the multi-planar API, it is easier to share buffers with other V4L2 drivers that also support the multi-planar API and may not expose planar formats with contiguous planes. With non-contiguous planes, the U and V planes may not start at the same offset as with the continuous planes. Therefore, the RGA driver cannot rely on its calculation of the plane offsets based on the format and frame size anymore, but must remember the offsets when it created the mapping. Therefore, I also reworked how the DMA mapping is handled. As a bonus, the RGA driver should now work correctly on devices with more than 4 GB of memory. Video buffers should now be allocated within the 4 GB boundary and an import of buffers that have higher addresses into the driver should fail. Patch 1 fixes the swizzling of RGA formats. While testing all formats of the driver on rk3568, I discovered that the color channels of the RGB formats are wrong when converting to NV12. I didn't test this on other SoCs with an RGA and I am not sure, if they behave differently regarding the color channels. Please report, if this breaks the color conversion on other SoCs, and I will make this SoC-specific. Patches 2 to 6 are the rework the DMA descriptor handling for the RGA MMU. The patches clean up, how the driver uses the DMA API, and make the creation of the descriptor list more explicit. Furthermore, the driver is changed to keep the mapping per video buffer instead of using a single mapping that is updated with every buffer. Patches 7 to 11 prepare the driver for the multi-planar API including a cleanup of the format handling in the buffer, and finally switch to the multi-planar API. Patch 12 updates the code that creates the DMA-descriptor mapping to correctly handle buffers with multiple planes. The driver has to iterate all planes and make them the continuous for the RGA. Patch 13 enables the NV12M format, which is the multi-planar variant of the NV12 format. Michael Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> --- Michael Tretter (13): media: rockchip: rga: fix swizzling for RGB formats media: rockchip: rga: extract helper to fill descriptors media: rockchip: rga: allocate DMA descriptors per buffer media: rockchip: rga: split src and dst buffer setup media: rockchip: rga: pre-calculate plane offsets media: rockchip: rga: set dma mask to 32 bits media: rockchip: rga: use clamp() to clamp size to limits media: rockchip: rga: use pixelformat to find format media: rockchip: rga: add local variable for pix_format media: rockchip: rga: use macros for testing buffer type media: rockchip: rga: switch to multi-planar API media: rockchip: rga: rework buffer handling for multi-planar formats media: rockchip: rga: add NV12M support drivers/media/platform/rockchip/rga/rga-buf.c | 166 ++++++++++++++++------- drivers/media/platform/rockchip/rga/rga-hw.c | 143 +++++++++++++------- drivers/media/platform/rockchip/rga/rga.c | 187 ++++++++++++-------------- drivers/media/platform/rockchip/rga/rga.h | 35 ++++- 4 files changed, 329 insertions(+), 202 deletions(-) --- base-commit: 0bb80ecc33a8fb5a682236443c1e740d5c917d1d change-id: 20230914-rockchip-rga-multiplanar-0d7c79b1ba93 Best regards,