From patchwork Fri Sep 4 20:18:31 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Prabhakar Mahadev Lad X-Patchwork-Id: 255899 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.0 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id BCCA7C43461 for ; Fri, 4 Sep 2020 20:18:54 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 922DC2087C for ; Fri, 4 Sep 2020 20:18:54 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728117AbgIDUSy (ORCPT ); Fri, 4 Sep 2020 16:18:54 -0400 Received: from relmlor1.renesas.com ([210.160.252.171]:6054 "EHLO relmlie5.idc.renesas.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1726441AbgIDUSv (ORCPT ); Fri, 4 Sep 2020 16:18:51 -0400 X-IronPort-AV: E=Sophos;i="5.76,391,1592838000"; d="scan'208";a="56410437" Received: from unknown (HELO relmlir5.idc.renesas.com) ([10.200.68.151]) by relmlie5.idc.renesas.com with ESMTP; 05 Sep 2020 05:18:50 +0900 Received: from localhost.localdomain (unknown [10.226.36.204]) by relmlir5.idc.renesas.com (Postfix) with ESMTP id 2FE08400C441; Sat, 5 Sep 2020 05:18:48 +0900 (JST) From: Lad Prabhakar To: Jacopo Mondi , Sakari Ailus , Laurent Pinchart , Steve Longerbeam , Paul , Hugues Fruchet Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Lad Prabhakar , Biju Das , Prabhakar , Mauro Carvalho Chehab Subject: [PATCH v4 2/6] media: i2c: ov5640: Separate out mipi configuration from s_power Date: Fri, 4 Sep 2020 21:18:31 +0100 Message-Id: <20200904201835.5958-3-prabhakar.mahadev-lad.rj@bp.renesas.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200904201835.5958-1-prabhakar.mahadev-lad.rj@bp.renesas.com> References: <20200904201835.5958-1-prabhakar.mahadev-lad.rj@bp.renesas.com> Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org In preparation for adding DVP configuration in s_power callback move mipi configuration into separate function Signed-off-by: Lad Prabhakar Reviewed-by: Biju Das Tested-by: Jacopo Mondi --- drivers/media/i2c/ov5640.c | 116 +++++++++++++++++++------------------ 1 file changed, 60 insertions(+), 56 deletions(-) diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c index 880fde73a030..8af11d532699 100644 --- a/drivers/media/i2c/ov5640.c +++ b/drivers/media/i2c/ov5640.c @@ -2014,6 +2014,61 @@ static void ov5640_set_power_off(struct ov5640_dev *sensor) clk_disable_unprepare(sensor->xclk); } +static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) +{ + int ret; + + if (!on) { + /* Reset MIPI bus settings to their default values. */ + ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58); + ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x04); + ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x00); + return 0; + } + + /* + * Power up MIPI HS Tx and LS Rx; 2 data lanes mode + * + * 0x300e = 0x40 + * [7:5] = 010 : 2 data lanes mode (see FIXME note in + * "ov5640_set_stream_mipi()") + * [4] = 0 : Power up MIPI HS Tx + * [3] = 0 : Power up MIPI LS Rx + * [2] = 0 : MIPI interface disabled + */ + ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x40); + if (ret) + return ret; + + /* + * Gate clock and set LP11 in 'no packets mode' (idle) + * + * 0x4800 = 0x24 + * [5] = 1 : Gate clock when 'no packets' + * [2] = 1 : MIPI bus in LP11 when 'no packets' + */ + ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x24); + if (ret) + return ret; + + /* + * Set data lanes and clock in LP11 when 'sleeping' + * + * 0x3019 = 0x70 + * [6] = 1 : MIPI data lane 2 in LP11 when 'sleeping' + * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping' + * [4] = 1 : MIPI clock lane in LP11 when 'sleeping' + */ + ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x70); + if (ret) + return ret; + + /* Give lanes some time to coax into LP11 state. */ + usleep_range(500, 1000); + + return 0; +} + static int ov5640_set_power(struct ov5640_dev *sensor, bool on) { int ret = 0; @@ -2026,67 +2081,16 @@ static int ov5640_set_power(struct ov5640_dev *sensor, bool on) ret = ov5640_restore_mode(sensor); if (ret) goto power_off; + } - /* We're done here for DVP bus, while CSI-2 needs setup. */ - if (sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY) - return 0; - - /* - * Power up MIPI HS Tx and LS Rx; 2 data lanes mode - * - * 0x300e = 0x40 - * [7:5] = 010 : 2 data lanes mode (see FIXME note in - * "ov5640_set_stream_mipi()") - * [4] = 0 : Power up MIPI HS Tx - * [3] = 0 : Power up MIPI LS Rx - * [2] = 0 : MIPI interface disabled - */ - ret = ov5640_write_reg(sensor, - OV5640_REG_IO_MIPI_CTRL00, 0x40); - if (ret) - goto power_off; - - /* - * Gate clock and set LP11 in 'no packets mode' (idle) - * - * 0x4800 = 0x24 - * [5] = 1 : Gate clock when 'no packets' - * [2] = 1 : MIPI bus in LP11 when 'no packets' - */ - ret = ov5640_write_reg(sensor, - OV5640_REG_MIPI_CTRL00, 0x24); - if (ret) - goto power_off; - - /* - * Set data lanes and clock in LP11 when 'sleeping' - * - * 0x3019 = 0x70 - * [6] = 1 : MIPI data lane 2 in LP11 when 'sleeping' - * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping' - * [4] = 1 : MIPI clock lane in LP11 when 'sleeping' - */ - ret = ov5640_write_reg(sensor, - OV5640_REG_PAD_OUTPUT00, 0x70); + if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) { + ret = ov5640_set_power_mipi(sensor, on); if (ret) goto power_off; + } - /* Give lanes some time to coax into LP11 state. */ - usleep_range(500, 1000); - - } else { - if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) { - /* Reset MIPI bus settings to their default values. */ - ov5640_write_reg(sensor, - OV5640_REG_IO_MIPI_CTRL00, 0x58); - ov5640_write_reg(sensor, - OV5640_REG_MIPI_CTRL00, 0x04); - ov5640_write_reg(sensor, - OV5640_REG_PAD_OUTPUT00, 0x00); - } - + if (!on) ov5640_set_power_off(sensor); - } return 0;