diff mbox series

[07/18] media: allegro: fix log2_max_poc in firmware 2019.1

Message ID 20201203110106.2939463-8-m.tretter@pengutronix.de
State Accepted
Commit e7cd90988b9d03c3a886a23f015c41c71371bc4f
Headers show
Series media: allegro: add HEVC support | expand

Commit Message

Michael Tretter Dec. 3, 2020, 11 a.m. UTC
The log2_max_poc field is used to set log2_max_pic_order_cnt_lsb_minus4
for the coded stream. It has an allowed range of 0 to 12.

param contains the value without the minus4, but since firmware
version 2019.1, the value has to be log2_max_pic_order_cnt_lsb - 1,
presumably to fit the maximum value of 16 into a 4 bit field.

The driver does not support firmware version 2019.1. Thus, change the
behaviour starting from firmware version 2019.2.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
 drivers/media/platform/allegro-dvt/allegro-mail.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/allegro-dvt/allegro-mail.c b/drivers/media/platform/allegro-dvt/allegro-mail.c
index 993e16f06305..5dbc1c029020 100644
--- a/drivers/media/platform/allegro-dvt/allegro-mail.c
+++ b/drivers/media/platform/allegro-dvt/allegro-mail.c
@@ -109,8 +109,11 @@  allegro_encode_config_blob(u32 *dst, struct create_channel_param *param)
 
 	val = 0;
 	val |= param->temporal_mvp_enable ? BIT(20) : 0;
-	val |= FIELD_PREP(GENMASK(7, 4), param->log2_max_frame_num) |
-	       FIELD_PREP(GENMASK(3, 0), param->log2_max_poc);
+	val |= FIELD_PREP(GENMASK(7, 4), param->log2_max_frame_num);
+	if (version >= MCU_MSG_VERSION_2019_2)
+		val |= FIELD_PREP(GENMASK(3, 0), param->log2_max_poc - 1);
+	else
+		val |= FIELD_PREP(GENMASK(3, 0), param->log2_max_poc);
 	dst[i++] = val;
 
 	val = 0;