diff mbox series

[v4,1/2] dt-bindings: media: imx8-jpeg: Add clocks entries

Message ID 20240408030734.1191069-1-mirela.rabulea@nxp.com
State Superseded
Headers show
Series [v4,1/2] dt-bindings: media: imx8-jpeg: Add clocks entries | expand

Commit Message

Mirela Rabulea April 8, 2024, 3:07 a.m. UTC
From: Fabio Estevam <festevam@gmail.com>

The JPEG decoder/encoder present in iMX8QXP and iMX8QM SoCs need
the PER and IPG clocks to be functional, so add the clock entries.

This also fixes the following schema warning:

imx8qm-apalis-eval.dtb: jpegdec@58400000: 'assigned-clock-rates', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
        from schema $id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
---

Changes since v3:
- Add items for clocks (per Krzysztof's feddback)
- Add description for clocks (per Conor's feddback to the other similar patch from Alexander)
- Add "media:" to the subject
- Add Mirela's signed-off
- For the similar patches that were sent for this issue, should Co-developed-by/Signed-off-by be added? Alexander Stein? Frank Li?

Changes since v2:
- Remove clock-names. (Mirela)

 .../devicetree/bindings/media/nxp,imx8-jpeg.yaml   | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Krzysztof Kozlowski April 8, 2024, 6:38 a.m. UTC | #1
On 08/04/2024 05:07, Mirela Rabulea wrote:
> From: Fabio Estevam <festevam@gmail.com>
> 
> The JPEG decoder/encoder present in iMX8QXP and iMX8QM SoCs need
> the PER and IPG clocks to be functional, so add the clock entries.
> 
> This also fixes the following schema warning:
> 
> imx8qm-apalis-eval.dtb: jpegdec@58400000: 'assigned-clock-rates', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
>         from schema $id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml#
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>
> Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
> ---
> 

Please correct subject. You already got comments on this.
https://lore.kernel.org/linux-devicetree/2fb8c43c-c079-e04e-f727-3bc1dc29996e@linaro.org/

> Changes since v3:
> - Add items for clocks (per Krzysztof's feddback)
> - Add description for clocks (per Conor's feddback to the other similar patch from Alexander)
> - Add "media:" to the subject

Where? It was there before, so what did you change?


> - Add Mirela's signed-off
> - For the similar patches that were sent for this issue, should Co-developed-by/Signed-off-by be added? Alexander Stein? Frank Li?
> 
> Changes since v2:
> - Remove clock-names. (Mirela)
> 
>  .../devicetree/bindings/media/nxp,imx8-jpeg.yaml   | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
> index 3d9d1db37040..cc040feb77d7 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
> @@ -31,6 +31,14 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  clocks:
> +    description:
> +      The JPEG decoder/encoder requires two clocks for it's wrapper (AXI and APB),
> +      and one clock for it's core engine (AXI, same source as for the wrapper)

Description is now redundant, drop it.

> +    items:
> +      - description: AXI DMA engine clock for fetching JPEG bitstream from memory (per)
> +      - description: IP bus clock for register access (ipg)
> +
>    interrupts:
>      description: |
>        There are 4 slots available in the IP, which the driver may use
> @@ -49,6 +57,7 @@ properties:
>  required:
>    - compatible
>    - reg
> +  - clocks
>    - interrupts
>    - power-domains

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
index 3d9d1db37040..cc040feb77d7 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
@@ -31,6 +31,14 @@  properties:
   reg:
     maxItems: 1
 
+  clocks:
+    description:
+      The JPEG decoder/encoder requires two clocks for it's wrapper (AXI and APB),
+      and one clock for it's core engine (AXI, same source as for the wrapper)
+    items:
+      - description: AXI DMA engine clock for fetching JPEG bitstream from memory (per)
+      - description: IP bus clock for register access (ipg)
+
   interrupts:
     description: |
       There are 4 slots available in the IP, which the driver may use
@@ -49,6 +57,7 @@  properties:
 required:
   - compatible
   - reg
+  - clocks
   - interrupts
   - power-domains
 
@@ -56,12 +65,15 @@  additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/firmware/imx/rsrc.h>
 
     jpegdec: jpegdec@58400000 {
         compatible = "nxp,imx8qxp-jpgdec";
         reg = <0x58400000 0x00050000 >;
+        clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+                 <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
         interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
@@ -76,6 +88,8 @@  examples:
     jpegenc: jpegenc@58450000 {
         compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
         reg = <0x58450000 0x00050000 >;
+        clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+                 <&img_jpeg__lpcg IMX_LPCG_CLK_4>;
         interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,