| [V4,4/4] mmc: core: Support aggressive power management for (e)MMC/SD |
2013-05-02 |
Ulf Hansson |
|
New |
| [V4,3/4] mmc: block: Enable runtime pm for mmc blkdevice |
2013-05-02 |
Ulf Hansson |
|
New |
| [V4,2/4] mmc: core: Add bus_ops for runtime pm callbacks |
2013-05-02 |
Ulf Hansson |
|
New |
| [V4,1/4] mmc: core: Stop bkops for eMMC only from mmc suspend |
2013-05-02 |
Ulf Hansson |
|
New |
| [v2] mmc: core: Fix select power class after resume |
2013-04-23 |
Fredrik Soderstedt |
|
New |
| mmc: core: Fix select power class after resume |
2013-04-22 |
Fredrik Soderstedt |
|
New |
| mmc: core: Restructure and simplify code for mmc sleep|awake |
2013-04-19 |
Ulf Hansson |
|
New |
| [RESEND] mmc: core: Re-use code for MMC_CAP2_DETECT_ON_ERR in polling mode |
2013-04-18 |
Ulf Hansson |
|
New |
| mmc: core: Only execute tuning for SDR50 and SDR104 |
2013-04-17 |
Fredrik Soderstedt |
|
New |
| [RESEND,V3,4/4] mmc: core: Support aggressive power management for (e)MMC/SD |
2013-04-16 |
Ulf Hansson |
|
New |
| [V3,4/4] mmc: core: Support aggressive power management for (e)MMC/SD |
2013-04-16 |
Ulf Hansson |
|
New |
| [V3,3/4] mmc: block: Enable runtime pm for mmc blkdevice |
2013-04-16 |
Ulf Hansson |
|
New |
| [V3,2/4] mmc: core: Add bus_ops for runtime pm callbacks |
2013-04-16 |
Ulf Hansson |
|
New |
| [V3,1/4] mmc: core: Stop bkops for eMMC only from mmc suspend |
2013-04-16 |
Ulf Hansson |
|
New |
| [v5] mmc: dw_mmc: let device core setup the default pin configuration |
2013-04-11 |
thomas.abraham@linaro.org |
|
Accepted |
| [v4] mmc: dw_mmc: let device core setup the default pin configuration |
2013-04-09 |
thomas.abraham@linaro.org |
|
New |
| [V2,2/2] mmc: block: Enable runtime pm for mmc blkdevice |
2013-04-08 |
Ulf Hansson |
|
New |
| [V2,1/2] mmc: core: Add bus_ops for runtime pm callbacks |
2013-04-08 |
Ulf Hansson |
|
New |
| [V2,2/2] mmc: block: Enable runtime pm for mmc blkdevice |
2013-04-04 |
Ulf Hansson |
|
New |
| [V2,1/2] mmc: core: Add bus_ops for runtime pm callbacks |
2013-04-04 |
Ulf Hansson |
|
New |
| [v2,2/2] mmc: dw_mmc: Use pr_info instead of printk |
2013-04-04 |
Sachin Kamat |
|
Accepted |
| [v2,1/2] mmc: dw_mmc: Check return value of regulator_enable |
2013-04-04 |
Sachin Kamat |
|
Accepted |
| [v2] mmc: dwmmc: let device core setup the default pin configuration |
2013-04-02 |
thomas.abraham@linaro.org |
|
New |
| [Resend,2/2] mmc: dw_mmc: Use pr_info instead of printk |
2013-03-28 |
Sachin Kamat |
|
Superseded |
| [2/2] mmc: dw_mmc: Use pr_info instead of printk |
2013-03-28 |
Sachin Kamat |
|
Superseded |
| [1/2] mmc: dw_mmc: Check return value of regulator_enable |
2013-03-28 |
Sachin Kamat |
|
Superseded |
| mmc: core: Re-use code for MMC_CAP2_DETECT_ON_ERR in polling mode |
2013-03-27 |
Ulf Hansson |
|
New |
| mmc: core: Decrease the card detect frequency in polling mode |
2013-03-22 |
Ulf Hansson |
|
New |
| mmc: dwmmc: let device core setup the default pin configuration |
2013-03-06 |
thomas.abraham@linaro.org |
|
New |
| mmc: sdhci-s3c: let device core setup the default pin configuration |
2013-03-06 |
thomas.abraham@linaro.org |
|
Accepted |
| [3/3] mmc: block: Enable runtime pm for mmc blkdevice |
2013-03-01 |
Ulf Hansson |
|
New |
| [2/3] mmc: core: Add bus_ops for runtime pm callbacks |
2013-03-01 |
Ulf Hansson |
|
New |
| [1/3] mmc: core: Remove power_restore bus_ops for mmc and sd |
2013-03-01 |
Ulf Hansson |
|
New |
| [2/2] mmc: dw_mmc: exynos: Remove unnecessary use of of_match_ptr() |
2013-02-18 |
Sachin Kamat |
|
Accepted |
| [1/2] mmc: dw_mmc: Make dw_mci_exynos_probe static |
2013-02-18 |
Sachin Kamat |
|
Accepted |
| [2/2] mmc: dw_mmc: exynos: Add pinctrl support |
2013-02-07 |
Sachin Kamat |
|
Rejected |
| [1/2] mmc: dw_mmc: exynos: Add compatibility for exynos4412 SoC |
2013-02-07 |
Sachin Kamat |
|
Superseded |
| [v6,5/5] mmc: core: Fixup signal voltage switch |
2013-01-28 |
Johan Rudholm |
|
Accepted |
| [v6,4/5] mmc: core: Break out start_signal_voltage_switch |
2013-01-28 |
Johan Rudholm |
|
Accepted |
| [v6,3/5] mmc: core: Add card_busy to host_ops |
2013-01-28 |
Johan Rudholm |
|
Accepted |
| [v6,2/5] mmc: core: Add mmc_power_cycle |
2013-01-28 |
Johan Rudholm |
|
Accepted |
| [v6,1/5] mmc: sd: Simplify by using mmc_host_uhs |
2013-01-28 |
Johan Rudholm |
|
Accepted |
| mmc: mmci: Fixup and cleanup code for DMA handling |
2013-01-21 |
Ulf Hansson |
|
Accepted |
| [V2] mmc: mmci: Fixup clock gating when freq is 0 for ST-variants |
2013-01-09 |
Ulf Hansson |
|
Accepted |
| [v5,4/4] mmc: core: Fixup signal voltage switch |
2013-01-08 |
Johan Rudholm |
|
New |
| [v5,3/4] mmc: core: Break out start_signal_voltage_switch |
2013-01-08 |
Johan Rudholm |
|
New |
| [v5,2/4] mmc: core: Add card_busy to host_ops |
2013-01-08 |
Johan Rudholm |
|
Superseded |
| [v5,1/4] mmc: core: Add mmc_power_cycle |
2013-01-08 |
Johan Rudholm |
|
Superseded |
| [1/1] mmc: mmci: Use devm_regulator_get API |
2013-01-08 |
Sachin Kamat |
|
Not Applicable |
| mmc: mmci: Fixup clock gating when freq is 0 for ST-variants |
2013-01-07 |
Ulf Hansson |
|
New |
| [v4,4/4] mmc: core: Fixup signal voltage switch |
2013-01-07 |
Johan Rudholm |
|
New |
| [v4,3/4] mmc: core: Break out start_signal_voltage_switch |
2013-01-07 |
Johan Rudholm |
|
New |
| [v4,2/4] mmc: core: Add card_busy to host_ops |
2013-01-07 |
Johan Rudholm |
|
Superseded |
| [v4,1/4] mmc: core: Add mmc_power_cycle |
2013-01-07 |
Johan Rudholm |
|
Superseded |
| [V3] mmc: mmci: Fixup and cleanup code for DMA handling |
2013-01-07 |
Ulf Hansson |
|
New |
| [v3,3/3] mmc: core: Fixup signal voltage switch |
2013-01-03 |
Johan Rudholm |
|
New |
| [v3,2/3] mmc: core: Add card_busy to host_ops |
2013-01-03 |
Johan Rudholm |
|
Superseded |
| [v3,1/3] mmc: core: Add mmc_power_cycle |
2013-01-03 |
Johan Rudholm |
|
Superseded |
| [v2,3/3] mmc: core: Fixup signal voltage switch |
2012-12-18 |
Johan Rudholm |
|
New |
| [v2,2/3] mmc: core: Add card_busy to host_ops |
2012-12-18 |
Johan Rudholm |
|
Superseded |
| [v2,1/3] mmc: core: Add mmc_power_cycle |
2012-12-18 |
Johan Rudholm |
|
Superseded |
| [V2,2/2] mmc: mmci: Move ios_handler functionality into the driver |
2012-12-14 |
Ulf Hansson |
|
Accepted |
| [1/2] mmc: mmci: Convert to use mmc_regulator_get_supply |
2012-12-14 |
Ulf Hansson |
|
Accepted |
| mmc: mmci: Gate the clock when freq is 0 |
2012-12-12 |
Ulf Hansson |
|
New |
| mmc: mmci: Support for DDR mode |
2012-12-12 |
Ulf Hansson |
|
Accepted |
| mmc: mmci: Support MMC_PM_KEEP_POWER |
2012-12-12 |
Ulf Hansson |
|
Accepted |
| mmc: mmci: Gate the clock in runtime suspend to save power |
2012-12-11 |
Ulf Hansson |
|
Accepted |
| mmc: mmci: Fixup and cleanup code for DMA handling |
2012-12-11 |
Ulf Hansson |
|
New |
| [3/3] mmc: core: Fixup signal voltage switch |
2012-12-07 |
Johan Rudholm |
|
New |
| [2/3] mmc: core: Add card_busy to host_ops |
2012-12-07 |
Johan Rudholm |
|
Superseded |
| [1/3] mmc: core: Add mmc_power_cycle |
2012-12-07 |
Johan Rudholm |
|
Superseded |
| [1/1] mmc: sdhci-s3c: Fix compilation warning |
2012-12-04 |
Sachin Kamat |
|
Accepted |
| [2/2] mmc: Remove redundant null check before kfree in bus.c |
2012-11-20 |
Sachin Kamat |
|
Accepted |
| [1/2] mmc: Remove redundant null check before kfree in sdio_bus.c |
2012-11-20 |
Sachin Kamat |
|
Accepted |
| mmc: sdhci-s3c: Use NULL instead of 0 for pointers |
2012-11-20 |
Tushar Behera |
|
Accepted |
| mmc: dw_mmc: enable controller interrupt before calling mmc_start_host |
2012-11-19 |
James Hogan |
|
New |
| [1/1] mmc: sdhci-dove: remove duplicate inclusion of linux/err.h |
2012-11-19 |
Sachin Kamat |
|
Accepted |
| mmc: core: debugfs: Add signal_voltage to ios dump |
2012-10-26 |
Johan Rudholm |
|
Accepted |
| MMCI: fetch pinctrl handle and set default state |
2012-10-22 |
Linus Walleij |
|
New |
| [RFC/PATCH,v2] mmc: core: Fixup signal voltage switch |
2012-10-15 |
Johan Rudholm |
|
New |
| mmc: mmci: Fixup and cleanup code for DMA handling |
2012-10-12 |
Ulf Hansson |
|
New |
| mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant |
2012-10-12 |
Ulf Hansson |
|
New |
| [RESEND,2/2] mmc: mmci: Switching off HWFC for SDIO depends on MCLK |
2012-10-10 |
Ulf Hansson |
|
Accepted |
| [RESEND,1/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO |
2012-10-10 |
Ulf Hansson |
|
Accepted |
| [2/2] mmc: mmci: Switching off HWFC for SDIO depends on MCLK |
2012-10-10 |
Ulf Hansson |
|
Superseded |
| [1/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO |
2012-10-10 |
Ulf Hansson |
|
Superseded |
| mmc: dw_mmc: enable controller interrupt before calling mmc_start_host |
2012-10-08 |
Yuvaraj |
|
Accepted |
| [RFC] mmc: sdhci: Let core handle UHS switch failure |
2012-09-28 |
Johan Rudholm |
|
New |
| [RFC/PATCH] mmc: core: Fixup signal voltage switch |
2012-09-27 |
Johan Rudholm |
|
New |
| [v2,2/2] mmc: core: Power cycle card on voltage switch fail |
2012-09-25 |
Johan Rudholm |
|
New |
| [v2,1/2] mmc: core: Proper signal voltage switch |
2012-09-25 |
Johan Rudholm |
|
New |
| [v2,3/3] mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume |
2012-09-21 |
Chander Kashyap |
|
Accepted |
| [2/2] mmc: core: Power cycle card on voltage switch fail |
2012-09-20 |
Johan Rudholm |
|
New |
| [1/2] mmc: core: Proper signal voltage switch |
2012-09-20 |
Johan Rudholm |
|
New |
| [v5] mmc: sdhci-s3c: Add device tree support |
2012-09-18 |
Chris Ball |
|
New |
| [v6,9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc |
2012-09-17 |
thomas.abraham@linaro.org |
|
Accepted |
| [v6,8/9] mmc: dw_mmc: add support for implementation specific callbacks |
2012-09-17 |
thomas.abraham@linaro.org |
|
Accepted |
| [v6,7/9] mmc: dw_mmc: prepare functions in dw_mmc-pltfm for reuse |
2012-09-17 |
thomas.abraham@linaro.org |
|
Accepted |
| [v6,6/9] mmc: dw_mmc: add device tree support |
2012-09-17 |
thomas.abraham@linaro.org |
|
Accepted |
| [v6,5/9] mmc: dw_mmc: add quirk to indicate missing write protect line |
2012-09-17 |
thomas.abraham@linaro.org |
|
Accepted |
