mbox series

[RFC,v6,0/2] Add SDHC interconnect bandwidth scaling

Message ID 1584973502-14775-1-git-send-email-ppvk@codeaurora.org
Headers show
Series Add SDHC interconnect bandwidth scaling | expand

Message

Pradeep P V K March 23, 2020, 2:25 p.m. UTC 
Add interconnect bandwidths for SDHC driver using OPP framework that
is required by SDHC driver based on the clock frequency and bus width
of the card. Otherwise, the system clocks may run at minimum clock
speed and thus affecting the performance.

This change is based on
[RFC] mmc: host: sdhci-msm: Use the interconnect API
(https://lkml.org/lkml/2018/10/11/499) and

[PATCH v6] Introduce Bandwidth OPPs for interconnects
(https://lkml.org/lkml/2019/12/6/740)

Pradeep P V K (2):
  mmc: sdhci-msm: Add interconnect bus bandwidth scaling support
  dt-bindings: mmc: sdhci-msm: Add interconnect BW scaling strings

 .../devicetree/bindings/mmc/sdhci-msm.txt          |  18 ++
 drivers/mmc/host/sdhci-msm.c                       | 240 ++++++++++++++++++++-
 2 files changed, 254 insertions(+), 4 deletions(-)