mbox series

[v5,0/4] mmc: sdhci-of-arasan: Enable UHS-1 support for Keem Bay SOC

Message ID 20201008181844.27947-1-muhammad.husaini.zulkifli@intel.com
Headers show
Series mmc: sdhci-of-arasan: Enable UHS-1 support for Keem Bay SOC | expand

Message

Zulkifli, Muhammad Husaini Oct. 8, 2020, 6:18 p.m. UTC
From: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>

Hi.

The first patch is the header file to handle ATF call.

The second patch is DT binding for arasan controller for uhs support.

The third patch is to introduce the structure device pointer in arasan controller probe.

The fourth patch is to enable UHS-1 Support for Keem Bay EVM.

All of these patches was tested with Keem Bay evaluation module board.

Kindly help to review this patch set.

Thank you.

Changes since v4:
- Fixed comment by Andy and Sudeep on first patch.
- Add Acked-by tag.
- Fixed comment by Michal and Andy on the third patch to replace current users of &pdev->dev.

Changes since v3:
- Add Dt bindings for uhs gpio.
- Fixed comment by Michal and Sudeep on header file for the macro and error code.
- Fixed comment by Andy and created 1 new patch to separate the struc dev pointer in probe func.
- Fixed comment by Michal in arasan controller code.

Changes since v2:
- Removed Document DT Bindings for Keembay Firmware.
- Removed Firmware Driver to handle ATF Service call.
- Add header file to handle API function for device driver to communicate with Arm Trusted Firmware.

Changes since v1:
- Add Document DT Bindings for Keembay Firmware.
- Created Firmware Driver to handle ATF Service call
- Provide API for arasan driver for sd card voltage changes

Muhammad Husaini Zulkifli (4):
  firmware: keembay: Add support for Trusted Firmware Service call
  dt-bindings: mmc: Add uhs-gpio for Keem Bay UHS-1 Support
  mmc: sdhci-of-arasan: Add structure device pointer in probe
  mmc: sdhci-of-arasan: Enable UHS-1 support for Keem Bay SOC

 .../devicetree/bindings/mmc/arasan,sdhci.yaml |   8 +-
 drivers/mmc/host/sdhci-of-arasan.c            | 163 ++++++++++++++++--
 include/linux/firmware/intel/keembay.h        |  47 +++++
 3 files changed, 199 insertions(+), 19 deletions(-)
 create mode 100644 include/linux/firmware/intel/keembay.h

--
2.17.1

Comments

Andy Shevchenko Oct. 9, 2020, 1:06 p.m. UTC | #1
On Fri, Oct 09, 2020 at 02:18:40AM +0800, muhammad.husaini.zulkifli@intel.com wrote:
> From: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
> 
> Hi.
> 
> The first patch is the header file to handle ATF call.
> 
> The second patch is DT binding for arasan controller for uhs support.
> 
> The third patch is to introduce the structure device pointer in arasan controller probe.
> 
> The fourth patch is to enable UHS-1 Support for Keem Bay EVM.
> 
> All of these patches was tested with Keem Bay evaluation module board.
> 
> Kindly help to review this patch set.

It seems that this is no go for Ulf until you switch to vqmmc GPIO regulators.