diff mbox series

[v3,2/7] mmc: sdhci-of-arasan: Fix SDHCI_RESET_ALL for CQHCI

Message ID 20221024105229.v3.2.I29f6a2189e84e35ad89c1833793dca9e36c64297@changeid
State New
Headers show
Series None | expand

Commit Message

Brian Norris Oct. 24, 2022, 5:54 p.m. UTC 
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.

It's not typical to perform resets while CQE is enabled, but one
particular case I hit commonly enough: mmc_suspend() -> mmc_power_off().
Typically we will eventually deactivate CQE (cqhci_suspend() ->
cqhci_deactivate()), but that's not guaranteed -- in particular, if
we perform a partial (e.g., interrupted) system suspend.

The same bug was already found and fixed for two other drivers, in v5.7
and v5.9:

5cf583f1fb9c mmc: sdhci-msm: Deactivate CQE during SDHC reset
df57d73276b8 mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers

The latter is especially prescient, saying "other drivers using CQHCI
might benefit from a similar change, if they also have CQHCI reset by
SDHCI_RESET_ALL."

So like these other patches, deactivate CQHCI when resetting the
controller. Do this via the new sdhci_and_cqhci_reset() helper.

Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---

Changes in v3:
 - Refactor to a "SDHCI and CQHCI" helper -- sdhci_and_cqhci_reset()

Changes in v2:
 - Rely on cqhci_deactivate() to safely handle (ignore)
   not-yet-initialized CQE support

 drivers/mmc/host/sdhci-of-arasan.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 3997cad1f793..cfb891430174 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -25,6 +25,7 @@ 
 #include <linux/firmware/xlnx-zynqmp.h>
 
 #include "cqhci.h"
+#include "sdhci-cqhci.h"
 #include "sdhci-pltfm.h"
 
 #define SDHCI_ARASAN_VENDOR_REGISTER	0x78
@@ -366,7 +367,7 @@  static void sdhci_arasan_reset(struct sdhci_host *host, u8 mask)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
 
-	sdhci_reset(host, mask);
+	sdhci_and_cqhci_reset(host, mask);
 
 	if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_FORCE_CDTEST) {
 		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);