diff mbox series

[V2,3/3] mmc: sdhci-pci-gli: Add support SD Express card for GL9767

Message ID 20230530095308.8165-4-victorshihgli@gmail.com
State Superseded
Headers show
Series Add Genesys Logic GL9767 support | expand

Commit Message

Victor Shih May 30, 2023, 9:53 a.m. UTC
From: Victor Shih <victor.shih@genesyslogic.com.tw>

Add support SD Express card for GL9767. The workflow of the
SD Express card in GL9767 is as below.
1. GL9767 operates in SD mode and set MMC_CAP2_SD_EXP flag.
2. If card is inserted, Host send CMD8 to ask the capabilities
   of the card.
3. If the card has PCIe capability, then init_sd_express()
   will be invoked.
4. If the card has been put in write protect state then the
   SD features supported by SD mode but not supported by
   PCIe mode, therefore GL9767 switch to SD mode.
5. If the card has not been put in write protect state then
   GL9767 switch from SD mode to PCIe/NVMe mode and mmc driver
   handover control to NVMe driver.
6. If card is removed, GL9767 will return to SD mode.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
---
 drivers/mmc/host/sdhci-pci-gli.c | 105 +++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)

Comments

Adrian Hunter May 31, 2023, 7:14 a.m. UTC | #1
On 30/05/23 12:53, Victor Shih wrote:
> From: Victor Shih <victor.shih@genesyslogic.com.tw>
> 
> Add support SD Express card for GL9767. The workflow of the
> SD Express card in GL9767 is as below.
> 1. GL9767 operates in SD mode and set MMC_CAP2_SD_EXP flag.
> 2. If card is inserted, Host send CMD8 to ask the capabilities
>    of the card.
> 3. If the card has PCIe capability, then init_sd_express()
>    will be invoked.
> 4. If the card has been put in write protect state then the
>    SD features supported by SD mode but not supported by
>    PCIe mode, therefore GL9767 switch to SD mode.
> 5. If the card has not been put in write protect state then
>    GL9767 switch from SD mode to PCIe/NVMe mode and mmc driver
>    handover control to NVMe driver.
> 6. If card is removed, GL9767 will return to SD mode.
> 
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/sdhci-pci-gli.c | 105 +++++++++++++++++++++++++++++++
>  1 file changed, 105 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index 178253a7e86f..c7fa92fdadcd 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -164,6 +164,10 @@
>  #define PCIE_GLI_9767_CFG		0x8A0
>  #define   PCIE_GLI_9767_CFG_LOW_PWR_OFF	  BIT(12)
>  
> +#define PCIE_GLI_9767_COMBO_MUX_CTL			0x8C8
> +#define   PCIE_GLI_9767_COMBO_MUX_CTL_RST_EN		  BIT(6)
> +#define   PCIE_GLI_9767_COMBO_MUX_CTL_WAIT_PERST_EN	  BIT(10)
> +
>  #define PCIE_GLI_9767_PWR_MACRO_CTL					0x8D0
>  #define   PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE			  GENMASK(3, 0)
>  #define   PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE		  GENMASK(15, 12)
> @@ -181,6 +185,26 @@
>  #define   PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF		  BIT(21)
>  #define   PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN	  BIT(30)
>  
> +#define PCIE_GLI_9767_SDHC_CAP			0x91C
> +#define   PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT	  BIT(5)
> +
> +#define PCIE_GLI_9767_SD_EXPRESS_CTL			0x940
> +#define   PCIE_GLI_9767_SD_EXPRESS_CTL_SDEI_EXE		  BIT(0)
> +#define   PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE	  BIT(1)
> +
> +#define PCIE_GLI_9767_SD_DATA_MULTI_CTL				0x944
> +#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME	  GENMASK(23, 16)
> +#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE	  0x64
> +
> +#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2			0x950
> +#define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE	  BIT(0)
> +
> +#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2				0x954
> +#define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2_SDEI_COMPLETE_STATUS_EN	  BIT(0)
> +
> +#define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2				0x958
> +#define   PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN	  BIT(0)
> +
>  #define PCIE_GLI_9767_SD_PLL_CTL			0x938
>  #define   PCIE_GLI_9767_SD_PLL_CTL_PLL_LDIV		  GENMASK(9, 0)
>  #define   PCIE_GLI_9767_SD_PLL_CTL_PLL_PDIV		  GENMASK(15, 12)
> @@ -935,6 +959,85 @@ static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
>  	gli_set_9767(host);
>  }
>  
> +static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	struct sdhci_pci_slot *slot = sdhci_priv(host);
> +	struct pci_dev *pdev;
> +	u32 value;
> +	int i;
> +
> +	pdev = slot->chip->pdev;
> +
> +	if (mmc->ops->get_ro(mmc)) {
> +		mmc->ios.timing &= ~(MMC_TIMING_SD_EXP | MMC_TIMING_SD_EXP_1_2V);
> +		return 0;
> +	}
> +
> +	gl9767_vhs_write(pdev);
> +
> +	pci_read_config_dword(pdev, PCIE_GLI_9767_COMBO_MUX_CTL, &value);
> +	value &= ~(PCIE_GLI_9767_COMBO_MUX_CTL_RST_EN | PCIE_GLI_9767_COMBO_MUX_CTL_WAIT_PERST_EN);
> +	pci_write_config_dword(pdev, PCIE_GLI_9767_COMBO_MUX_CTL, value);
> +
> +	pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
> +	value &= ~PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME;
> +	value |= FIELD_PREP(PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME,
> +			    PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE);
> +	pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
> +
> +	pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, &value);
> +	value |= PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE;
> +	pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, value);
> +
> +	pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2, &value);
> +	value |= PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2_SDEI_COMPLETE_STATUS_EN;
> +	pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2, value);
> +
> +	pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2, &value);
> +	value |= PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN;
> +	pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2, value);
> +
> +	pci_read_config_dword(pdev, PCIE_GLI_9767_CFG, &value);
> +	value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
> +	pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value);
> +
> +	value = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> +	value &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_PLL_EN);
> +	sdhci_writew(host, value, SDHCI_CLOCK_CONTROL);
> +
> +	value = sdhci_readb(host, SDHCI_POWER_CONTROL);
> +	value |= ((SDHCI_POWER_180 | SDHCI_POWER_ON) << 4);
> +	sdhci_writeb(host, value, SDHCI_POWER_CONTROL);
> +
> +	pci_read_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, &value);
> +	value |= PCIE_GLI_9767_SD_EXPRESS_CTL_SDEI_EXE;
> +	pci_write_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, value);
> +
> +	for (i = 0; i < 2; i++) {
> +		msleep(10);
> +		pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, &value);
> +		if (value & PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE) {
> +			pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2,
> +					       value);
> +			break;
> +		}
> +	}
> +
> +	pci_read_config_dword(pdev, PCIE_GLI_9767_SDHC_CAP, &value);
> +	if ((value & PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT) == PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT) {
> +		pci_read_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, &value);
> +		value |= PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE;
> +		pci_write_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, value);
> +	} else {
> +		mmc->ios.timing &= ~(MMC_TIMING_SD_EXP | MMC_TIMING_SD_EXP_1_2V);
> +	}
> +
> +	gl9767_vhs_read(pdev);
> +
> +	return 0;
> +}
> +
>  static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
>  {
>  	struct sdhci_host *host = slot->host;
> @@ -967,6 +1070,8 @@ static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
>  	gl9767_hw_setting(slot);
>  	gli_pcie_enable_msi(slot);
>  	slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> +	host->mmc->caps2 |= MMC_CAP2_SD_EXP;
> +	host->mmc_host_ops.init_sd_express = gl9767_init_sd_express;
>  	sdhci_enable_v4_mode(host);
>  
>  	return 0;
Victor Shih May 31, 2023, 9:45 a.m. UTC | #2
Hi, Adrian

On Wed, May 31, 2023 at 3:15 PM Adrian Hunter <adrian.hunter@intel.com> wrote:
>
> On 30/05/23 12:53, Victor Shih wrote:
> > From: Victor Shih <victor.shih@genesyslogic.com.tw>
> >
> > Add support SD Express card for GL9767. The workflow of the
> > SD Express card in GL9767 is as below.
> > 1. GL9767 operates in SD mode and set MMC_CAP2_SD_EXP flag.
> > 2. If card is inserted, Host send CMD8 to ask the capabilities
> >    of the card.
> > 3. If the card has PCIe capability, then init_sd_express()
> >    will be invoked.
> > 4. If the card has been put in write protect state then the
> >    SD features supported by SD mode but not supported by
> >    PCIe mode, therefore GL9767 switch to SD mode.
> > 5. If the card has not been put in write protect state then
> >    GL9767 switch from SD mode to PCIe/NVMe mode and mmc driver
> >    handover control to NVMe driver.
> > 6. If card is removed, GL9767 will return to SD mode.
> >
> > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
>
> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
>

Excuse me, I will adjust the order of definitions and modify the
if-else condition
and content in gl9767_init_sd_express() function, please help to review
it once, thank you.

> > ---
> >  drivers/mmc/host/sdhci-pci-gli.c | 105 +++++++++++++++++++++++++++++++
> >  1 file changed, 105 insertions(+)
> >
> > diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> > index 178253a7e86f..c7fa92fdadcd 100644
> > --- a/drivers/mmc/host/sdhci-pci-gli.c
> > +++ b/drivers/mmc/host/sdhci-pci-gli.c
> > @@ -164,6 +164,10 @@
> >  #define PCIE_GLI_9767_CFG            0x8A0
> >  #define   PCIE_GLI_9767_CFG_LOW_PWR_OFF        BIT(12)
> >
> > +#define PCIE_GLI_9767_COMBO_MUX_CTL                  0x8C8
> > +#define   PCIE_GLI_9767_COMBO_MUX_CTL_RST_EN           BIT(6)
> > +#define   PCIE_GLI_9767_COMBO_MUX_CTL_WAIT_PERST_EN    BIT(10)
> > +
> >  #define PCIE_GLI_9767_PWR_MACRO_CTL                                  0x8D0
> >  #define   PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE                      GENMASK(3, 0)
> >  #define   PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE           GENMASK(15, 12)
> > @@ -181,6 +185,26 @@
> >  #define   PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF            BIT(21)
> >  #define   PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN     BIT(30)
> >
> > +#define PCIE_GLI_9767_SDHC_CAP                       0x91C
> > +#define   PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT   BIT(5)
> > +
> > +#define PCIE_GLI_9767_SD_EXPRESS_CTL                 0x940
> > +#define   PCIE_GLI_9767_SD_EXPRESS_CTL_SDEI_EXE                BIT(0)
> > +#define   PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE         BIT(1)
> > +
> > +#define PCIE_GLI_9767_SD_DATA_MULTI_CTL                              0x944
> > +#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME      GENMASK(23, 16)
> > +#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE        0x64
> > +
> > +#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2                     0x950
> > +#define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE       BIT(0)
> > +
> > +#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2                          0x954
> > +#define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2_SDEI_COMPLETE_STATUS_EN          BIT(0)
> > +
> > +#define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2                          0x958
> > +#define   PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN          BIT(0)
> > +
> >  #define PCIE_GLI_9767_SD_PLL_CTL                     0x938
> >  #define   PCIE_GLI_9767_SD_PLL_CTL_PLL_LDIV            GENMASK(9, 0)
> >  #define   PCIE_GLI_9767_SD_PLL_CTL_PLL_PDIV            GENMASK(15, 12)
> > @@ -935,6 +959,85 @@ static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
> >       gli_set_9767(host);
> >  }
> >
> > +static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
> > +{
> > +     struct sdhci_host *host = mmc_priv(mmc);
> > +     struct sdhci_pci_slot *slot = sdhci_priv(host);
> > +     struct pci_dev *pdev;
> > +     u32 value;
> > +     int i;
> > +
> > +     pdev = slot->chip->pdev;
> > +
> > +     if (mmc->ops->get_ro(mmc)) {
> > +             mmc->ios.timing &= ~(MMC_TIMING_SD_EXP | MMC_TIMING_SD_EXP_1_2V);
> > +             return 0;
> > +     }
> > +
> > +     gl9767_vhs_write(pdev);
> > +
> > +     pci_read_config_dword(pdev, PCIE_GLI_9767_COMBO_MUX_CTL, &value);
> > +     value &= ~(PCIE_GLI_9767_COMBO_MUX_CTL_RST_EN | PCIE_GLI_9767_COMBO_MUX_CTL_WAIT_PERST_EN);
> > +     pci_write_config_dword(pdev, PCIE_GLI_9767_COMBO_MUX_CTL, value);
> > +
> > +     pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
> > +     value &= ~PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME;
> > +     value |= FIELD_PREP(PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME,
> > +                         PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE);
> > +     pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
> > +
> > +     pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, &value);
> > +     value |= PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE;
> > +     pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, value);
> > +
> > +     pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2, &value);
> > +     value |= PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2_SDEI_COMPLETE_STATUS_EN;
> > +     pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2, value);
> > +
> > +     pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2, &value);
> > +     value |= PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN;
> > +     pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2, value);
> > +
> > +     pci_read_config_dword(pdev, PCIE_GLI_9767_CFG, &value);
> > +     value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
> > +     pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value);
> > +
> > +     value = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> > +     value &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_PLL_EN);
> > +     sdhci_writew(host, value, SDHCI_CLOCK_CONTROL);
> > +
> > +     value = sdhci_readb(host, SDHCI_POWER_CONTROL);
> > +     value |= ((SDHCI_POWER_180 | SDHCI_POWER_ON) << 4);
> > +     sdhci_writeb(host, value, SDHCI_POWER_CONTROL);
> > +
> > +     pci_read_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, &value);
> > +     value |= PCIE_GLI_9767_SD_EXPRESS_CTL_SDEI_EXE;
> > +     pci_write_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, value);
> > +
> > +     for (i = 0; i < 2; i++) {
> > +             msleep(10);
> > +             pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, &value);
> > +             if (value & PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE) {
> > +                     pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2,
> > +                                            value);
> > +                     break;
> > +             }
> > +     }
> > +
> > +     pci_read_config_dword(pdev, PCIE_GLI_9767_SDHC_CAP, &value);
> > +     if ((value & PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT) == PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT) {
> > +             pci_read_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, &value);
> > +             value |= PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE;
> > +             pci_write_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, value);
> > +     } else {
> > +             mmc->ios.timing &= ~(MMC_TIMING_SD_EXP | MMC_TIMING_SD_EXP_1_2V);
> > +     }
> > +
> > +     gl9767_vhs_read(pdev);
> > +
> > +     return 0;
> > +}
> > +
> >  static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
> >  {
> >       struct sdhci_host *host = slot->host;
> > @@ -967,6 +1070,8 @@ static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
> >       gl9767_hw_setting(slot);
> >       gli_pcie_enable_msi(slot);
> >       slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> > +     host->mmc->caps2 |= MMC_CAP2_SD_EXP;
> > +     host->mmc_host_ops.init_sd_express = gl9767_init_sd_express;
> >       sdhci_enable_v4_mode(host);
> >
> >       return 0;
>

Thanks, Victor Shih
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index 178253a7e86f..c7fa92fdadcd 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -164,6 +164,10 @@ 
 #define PCIE_GLI_9767_CFG		0x8A0
 #define   PCIE_GLI_9767_CFG_LOW_PWR_OFF	  BIT(12)
 
+#define PCIE_GLI_9767_COMBO_MUX_CTL			0x8C8
+#define   PCIE_GLI_9767_COMBO_MUX_CTL_RST_EN		  BIT(6)
+#define   PCIE_GLI_9767_COMBO_MUX_CTL_WAIT_PERST_EN	  BIT(10)
+
 #define PCIE_GLI_9767_PWR_MACRO_CTL					0x8D0
 #define   PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE			  GENMASK(3, 0)
 #define   PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE		  GENMASK(15, 12)
@@ -181,6 +185,26 @@ 
 #define   PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF		  BIT(21)
 #define   PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN	  BIT(30)
 
+#define PCIE_GLI_9767_SDHC_CAP			0x91C
+#define   PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT	  BIT(5)
+
+#define PCIE_GLI_9767_SD_EXPRESS_CTL			0x940
+#define   PCIE_GLI_9767_SD_EXPRESS_CTL_SDEI_EXE		  BIT(0)
+#define   PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE	  BIT(1)
+
+#define PCIE_GLI_9767_SD_DATA_MULTI_CTL				0x944
+#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME	  GENMASK(23, 16)
+#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE	  0x64
+
+#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2			0x950
+#define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE	  BIT(0)
+
+#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2				0x954
+#define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2_SDEI_COMPLETE_STATUS_EN	  BIT(0)
+
+#define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2				0x958
+#define   PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN	  BIT(0)
+
 #define PCIE_GLI_9767_SD_PLL_CTL			0x938
 #define   PCIE_GLI_9767_SD_PLL_CTL_PLL_LDIV		  GENMASK(9, 0)
 #define   PCIE_GLI_9767_SD_PLL_CTL_PLL_PDIV		  GENMASK(15, 12)
@@ -935,6 +959,85 @@  static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
 	gli_set_9767(host);
 }
 
+static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	struct pci_dev *pdev;
+	u32 value;
+	int i;
+
+	pdev = slot->chip->pdev;
+
+	if (mmc->ops->get_ro(mmc)) {
+		mmc->ios.timing &= ~(MMC_TIMING_SD_EXP | MMC_TIMING_SD_EXP_1_2V);
+		return 0;
+	}
+
+	gl9767_vhs_write(pdev);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_COMBO_MUX_CTL, &value);
+	value &= ~(PCIE_GLI_9767_COMBO_MUX_CTL_RST_EN | PCIE_GLI_9767_COMBO_MUX_CTL_WAIT_PERST_EN);
+	pci_write_config_dword(pdev, PCIE_GLI_9767_COMBO_MUX_CTL, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
+	value &= ~PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME;
+	value |= FIELD_PREP(PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME,
+			    PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE);
+	pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, &value);
+	value |= PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE;
+	pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2, &value);
+	value |= PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2_SDEI_COMPLETE_STATUS_EN;
+	pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2, &value);
+	value |= PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN;
+	pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_CFG, &value);
+	value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
+	pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value);
+
+	value = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	value &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_PLL_EN);
+	sdhci_writew(host, value, SDHCI_CLOCK_CONTROL);
+
+	value = sdhci_readb(host, SDHCI_POWER_CONTROL);
+	value |= ((SDHCI_POWER_180 | SDHCI_POWER_ON) << 4);
+	sdhci_writeb(host, value, SDHCI_POWER_CONTROL);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, &value);
+	value |= PCIE_GLI_9767_SD_EXPRESS_CTL_SDEI_EXE;
+	pci_write_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, value);
+
+	for (i = 0; i < 2; i++) {
+		msleep(10);
+		pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, &value);
+		if (value & PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE) {
+			pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2,
+					       value);
+			break;
+		}
+	}
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_SDHC_CAP, &value);
+	if ((value & PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT) == PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT) {
+		pci_read_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, &value);
+		value |= PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE;
+		pci_write_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, value);
+	} else {
+		mmc->ios.timing &= ~(MMC_TIMING_SD_EXP | MMC_TIMING_SD_EXP_1_2V);
+	}
+
+	gl9767_vhs_read(pdev);
+
+	return 0;
+}
+
 static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
 {
 	struct sdhci_host *host = slot->host;
@@ -967,6 +1070,8 @@  static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
 	gl9767_hw_setting(slot);
 	gli_pcie_enable_msi(slot);
 	slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+	host->mmc->caps2 |= MMC_CAP2_SD_EXP;
+	host->mmc_host_ops.init_sd_express = gl9767_init_sd_express;
 	sdhci_enable_v4_mode(host);
 
 	return 0;