From patchwork Wed Nov 29 03:48:55 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ricky WU X-Patchwork-Id: 748393 Authentication-Results: smtp.subspace.kernel.org; dkim=none Received: from rtits2.realtek.com.tw (rtits2.realtek.com [211.75.126.72]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E35E11BC6; Tue, 28 Nov 2023 19:49:57 -0800 (PST) X-SpamFilter-By: ArmorX SpamTrap 5.78 with qID 3AT3nibnF2515593, This message is accepted by code: ctloc85258 Received: from mail.realtek.com (rtexh36505.realtek.com.tw[172.21.6.25]) by rtits2.realtek.com.tw (8.15.2/2.95/5.92) with ESMTPS id 3AT3nibnF2515593 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=OK); Wed, 29 Nov 2023 11:49:44 +0800 Received: from RTEXMBS01.realtek.com.tw (172.21.6.94) by RTEXH36505.realtek.com.tw (172.21.6.25) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.1.2375.32; Wed, 29 Nov 2023 11:49:45 +0800 Received: from localhost (172.22.81.102) by RTEXMBS01.realtek.com.tw (172.21.6.94) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.1.2507.34; Wed, 29 Nov 2023 11:49:44 +0800 From: Ricky Wu To: , , , , , , CC: Subject: [PATCH v6 2/3] misc: rtsx: add to support new card reader rts5264 Date: Wed, 29 Nov 2023 11:48:55 +0800 Message-ID: <20231129034856.2001223-3-ricky_wu@realtek.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20231129034856.2001223-1-ricky_wu@realtek.com> References: <20231129034856.2001223-1-ricky_wu@realtek.com> Precedence: bulk X-Mailing-List: linux-mmc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: RTEXH36505.realtek.com.tw (172.21.6.25) To RTEXMBS01.realtek.com.tw (172.21.6.94) X-KSE-ServerInfo: RTEXMBS01.realtek.com.tw, 9 X-KSE-AntiSpam-Interceptor-Info: fallback X-KSE-Antivirus-Interceptor-Info: fallback X-KSE-AntiSpam-Interceptor-Info: fallback X-KSE-ServerInfo: RTEXH36505.realtek.com.tw, 9 X-KSE-AntiSpam-Interceptor-Info: fallback X-KSE-Antivirus-Interceptor-Info: fallback X-KSE-AntiSpam-Interceptor-Info: fallback In order to support rts5264 in rtsx_pcr add the id in and determine whether the device is rts5264 to call rts5264 functions and do rts5264 workflows or set rts5264 registers Signed-off-by: Ricky Wu --- v2: removed ic version check v3: split the patch up with cardreader part and mmc part v4: split new definition up from v3 --- drivers/misc/cardreader/rtsx_pcr.c | 30 +++++++++++++++++++++++++----- drivers/misc/cardreader/rtsx_pcr.h | 1 + include/linux/rtsx_pci.h | 8 ++++++++ 3 files changed, 34 insertions(+), 5 deletions(-) diff --git a/drivers/misc/cardreader/rtsx_pcr.c b/drivers/misc/cardreader/rtsx_pcr.c index a30751ad3733..1a64364700eb 100644 --- a/drivers/misc/cardreader/rtsx_pcr.c +++ b/drivers/misc/cardreader/rtsx_pcr.c @@ -26,6 +26,7 @@ #include "rtsx_pcr.h" #include "rts5261.h" #include "rts5228.h" +#include "rts5264.h" static bool msi_en = true; module_param(msi_en, bool, S_IRUGO | S_IWUSR); @@ -54,6 +55,7 @@ static const struct pci_device_id rtsx_pci_ids[] = { { PCI_DEVICE(0x10EC, 0x5260), PCI_CLASS_OTHERS << 16, 0xFF0000 }, { PCI_DEVICE(0x10EC, 0x5261), PCI_CLASS_OTHERS << 16, 0xFF0000 }, { PCI_DEVICE(0x10EC, 0x5228), PCI_CLASS_OTHERS << 16, 0xFF0000 }, + { PCI_DEVICE(0x10EC, 0x5264), PCI_CLASS_OTHERS << 16, 0xFF0000 }, { 0, } }; @@ -714,6 +716,9 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, if (PCI_PID(pcr) == PID_5228) return rts5228_pci_switch_clock(pcr, card_clock, ssc_depth, initial_mode, double_clk, vpclk); + if (PCI_PID(pcr) == PID_5264) + return rts5264_pci_switch_clock(pcr, card_clock, + ssc_depth, initial_mode, double_clk, vpclk); if (initial_mode) { /* We use 250k(around) here, in initial stage */ @@ -987,7 +992,8 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id) int_reg &= (pcr->bier | 0x7FFFFF); - if (int_reg & SD_OC_INT) + if ((int_reg & SD_OC_INT) || + ((int_reg & SD_OVP_INT) && (PCI_PID(pcr) == PID_5264))) rtsx_pci_process_ocp_interrupt(pcr); if (int_reg & SD_INT) { @@ -1159,7 +1165,9 @@ void rtsx_pci_enable_oobs_polling(struct rtsx_pcr *pcr) { u16 val; - if ((PCI_PID(pcr) != PID_525A) && (PCI_PID(pcr) != PID_5260)) { + if ((PCI_PID(pcr) != PID_525A) && + (PCI_PID(pcr) != PID_5260) && + (PCI_PID(pcr) != PID_5264)) { rtsx_pci_read_phy_register(pcr, 0x01, &val); val |= 1<<9; rtsx_pci_write_phy_register(pcr, 0x01, val); @@ -1175,7 +1183,9 @@ void rtsx_pci_disable_oobs_polling(struct rtsx_pcr *pcr) { u16 val; - if ((PCI_PID(pcr) != PID_525A) && (PCI_PID(pcr) != PID_5260)) { + if ((PCI_PID(pcr) != PID_525A) && + (PCI_PID(pcr) != PID_5260) && + (PCI_PID(pcr) != PID_5264)) { rtsx_pci_read_phy_register(pcr, 0x01, &val); val &= ~(1<<9); rtsx_pci_write_phy_register(pcr, 0x01, val); @@ -1226,7 +1236,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr) rtsx_pci_enable_bus_int(pcr); /* Power on SSC */ - if (PCI_PID(pcr) == PID_5261) { + if ((PCI_PID(pcr) == PID_5261) || (PCI_PID(pcr) == PID_5264)) { /* Gating real mcu clock */ err = rtsx_pci_write_register(pcr, RTS5261_FW_CFG1, RTS5261_MCU_CLOCK_GATING, 0); @@ -1270,6 +1280,11 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr) else if (PCI_PID(pcr) == PID_5228) rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF, RTS5228_SSC_DEPTH_2M); + else if (is_version(pcr, 0x5264, IC_VER_A)) + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0); + else if (PCI_PID(pcr) == PID_5264) + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF, + RTS5264_SSC_DEPTH_2M); else rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF, 0x12); @@ -1305,6 +1320,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr) case PID_5260: case PID_5261: case PID_5228: + case PID_5264: rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, 1, 1); break; default: @@ -1404,6 +1420,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr) case 0x5228: rts5228_init_params(pcr); break; + + case 0x5264: + rts5264_init_params(pcr); + break; } pcr_dbg(pcr, "PID: 0x%04x, IC version: 0x%02x\n", @@ -1544,7 +1564,7 @@ static int rtsx_pci_probe(struct pci_dev *pcidev, pcr->pci = pcidev; dev_set_drvdata(&pcidev->dev, handle); - if (CHK_PCI_PID(pcr, 0x525A)) + if ((CHK_PCI_PID(pcr, 0x525A)) || (CHK_PCI_PID(pcr, 0x5264))) bar = 1; len = pci_resource_len(pcidev, bar); base = pci_resource_start(pcidev, bar); diff --git a/drivers/misc/cardreader/rtsx_pcr.h b/drivers/misc/cardreader/rtsx_pcr.h index 37d1f316ae17..9215d66de00c 100644 --- a/drivers/misc/cardreader/rtsx_pcr.h +++ b/drivers/misc/cardreader/rtsx_pcr.h @@ -74,6 +74,7 @@ void rtl8411b_init_params(struct rtsx_pcr *pcr); void rts5260_init_params(struct rtsx_pcr *pcr); void rts5261_init_params(struct rtsx_pcr *pcr); void rts5228_init_params(struct rtsx_pcr *pcr); +void rts5264_init_params(struct rtsx_pcr *pcr); static inline u8 map_sd_drive(int idx) { diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h index 534038d962e4..4612ef09a0c7 100644 --- a/include/linux/rtsx_pci.h +++ b/include/linux/rtsx_pci.h @@ -60,6 +60,7 @@ #define SD_EXIST (1 << 16) #define DELINK_INT GPIO0_INT #define MS_OC_INT (1 << 23) +#define SD_OVP_INT (1 << 23) #define SD_OC_INT (1 << 22) #define CARD_INT (XD_INT | MS_INT | SD_INT) @@ -80,6 +81,7 @@ #define OC_INT_EN (1 << 23) #define DELINK_INT_EN GPIO0_INT_EN #define MS_OC_INT_EN (1 << 23) +#define SD_OVP_INT_EN (1 << 23) #define SD_OC_INT_EN (1 << 22) #define RTSX_DUM_REG 0x1C @@ -583,6 +585,7 @@ #define OBFF_DISABLE 0x00 #define CDRESUMECTL 0xFE52 +#define CDGW 0xFE53 #define WAKE_SEL_CTL 0xFE54 #define PCLK_CTL 0xFE55 #define PCLK_MODE_SEL 0x20 @@ -764,6 +767,9 @@ #define SD_VIO_LDO_1V8 0x40 #define SD_VIO_LDO_3V3 0x70 +#define RTS5264_AUTOLOAD_CFG2 0xFF7D +#define RTS5264_CHIP_RST_N_SEL (1 << 6) + #define RTS5260_AUTOLOAD_CFG4 0xFF7F #define RTS5260_MIMO_DISABLE 0x8A /*RTS5261*/ @@ -1261,6 +1267,7 @@ struct rtsx_pcr { u8 dma_error_count; u8 ocp_stat; u8 ocp_stat2; + u8 ovp_stat; u8 rtd3_en; }; @@ -1271,6 +1278,7 @@ struct rtsx_pcr { #define PID_5260 0x5260 #define PID_5261 0x5261 #define PID_5228 0x5228 +#define PID_5264 0x5264 #define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid)) #define PCI_VID(pcr) ((pcr)->pci->vendor)