From patchwork Sun Mar 24 21:43:26 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Wadim Mueller X-Patchwork-Id: 782296 Received: from mail-lf1-f49.google.com (mail-lf1-f49.google.com [209.85.167.49]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id A1121433C9; Sun, 24 Mar 2024 21:44:31 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.167.49 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1711316673; cv=none; b=vAIKDe9ctvX4PnBU8Cj4hz/j8ubk0PdFMAt3vbKdrikjB21rAps20bhn5NIVf5jfUrSsPk2WrgzRMrNbTeyhxgL6XAI3Iie21JTDPQnDgql6UvsBMlcZLbcIo0iRs2LvyqYjiBGAXLaJiAkC6nvk85mIoWFkZgz2567VOCz8YPM= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1711316673; c=relaxed/simple; bh=2zj1KIM0IyZdVssFwbqXYgBukOlc5I412qb6cpDC4lk=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=CEYeCiCUWBt4XBHuLkSvW8LsbtQ0it1RozFNY7kU8IYCDEuAGO9qYSnKR2AzXnKGxC9XsTvgwzGBQLTP+Dn3ooHyz2eLw0zaMVdcRCD2kh9L5W83yqudCCpWuOTWAbktrkHMuCK4/xEwuxM0uJstNSb+p1UVt5P1rbFPxCGWqxs= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=HJLuCnze; arc=none smtp.client-ip=209.85.167.49 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="HJLuCnze" Received: by mail-lf1-f49.google.com with SMTP id 2adb3069b0e04-513d4559fb4so4946166e87.3; Sun, 24 Mar 2024 14:44:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1711316670; x=1711921470; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=RiGDpRiqz1yAaTqKQT355fKcvl8VoBlGy2bAGsxu0Ks=; b=HJLuCnzeppJEzkeUlDsoNweG6jsFUj6e1j647AWNlx6prwFxPR7C69rChG8MfESRgI juLIZE9XDN6qf4tIav/MXBp6WWAMx7lCgSsLVGloUVh8yBoW/aEzNQd5gY27ejSu/S23 HPG8/CFzTaNM+jtCqkQzsf0OdeQ2oLuH7dR73cnCFnGtRid9pehjZNZz2JwOmx4Zr2HZ e9UuOSD6UoUPy9PP5PYfimVMbD5RTPivlusX8KA+Hen/E4ZKFMSmlZnv9OSiybdi3FC2 9Www0O+DY9RTXb9VwsQdqaVg1RBqjOJZhUfS0zbdIYtTiUcH3Qyvd8yVfISiEGXxZ1TD PZeQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1711316670; x=1711921470; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=RiGDpRiqz1yAaTqKQT355fKcvl8VoBlGy2bAGsxu0Ks=; b=dbGvB/iA3CK6lMBidv5w/7EOS1WjBolmHYl4e2lJKrjWqTZZ38rWHGyXTpMMUtKA5X MirqpC/bfHsBeNc/swx+j/WnjA1/8+U5z840CSmfACnnL0lnTOLkCMncjsQ44zbUcDFv yHAu4qp9IqDMEi1H4RI/G2+NRl008d/tTxuvGAcS4HqIc9qZp5i55ljrTvSXSltxzJ7R KjacYKgc+W4M2IFHq/AVRgMsNiU4nv4sV4Rz7HL9Xt0i1Iczlcq5uq1oQGyOV7b5J4NE Ai7Dw7Y+tKtjpCNR6sDhCsMH59knqt+1p+tnkVn9TVNXe29DsRPxObx3UGw8bqTuiaRB sAfQ== X-Forwarded-Encrypted: i=1; AJvYcCVZ0TQyS5SOe3Vidm09r9M3iuNTYwcsn+Djt7A1s97W8zTHkLkVxJcj04Yvw/bEBtEf5ePkBGpmCCs/8bFAYlOlS6yxaGCzazdJQ6qq6cqZV7sZe6XkTAe6NlJyd5aRN5cJc7FZH6GIVyU/oBuL2HCGkzF+6Pt1CL78BEEB8kxlZpXRy3clN2NxBvl+jgZbdZV1S7PpJM9p01SFAW/XQJjMSg== X-Gm-Message-State: AOJu0YyRgsqhGTEHR1XlTIHj+kiyxMwwQ37s1eGJwFNd8D/Ups/10R/u 44YPt9n0tEx6MzM/A3BqkmgTt/NpA2jbCwNDb5o4RlyTAh9y12T9 X-Google-Smtp-Source: AGHT+IG9rNYUlwidGfrB8dKgKzeqnKbhSjGVr+DMFVgwBSnLAl1nBsRPWALtDB1VDlwgzLKHAtkUEQ== X-Received: by 2002:a19:5f11:0:b0:515:99f6:2ca4 with SMTP id t17-20020a195f11000000b0051599f62ca4mr3539263lfb.36.1711316669355; Sun, 24 Mar 2024 14:44:29 -0700 (PDT) Received: from bhlegrsu.conti.de ([2a02:908:2525:6ea0::2043]) by smtp.googlemail.com with ESMTPSA id w17-20020a170906385100b00a46d8e5a031sm2327542ejc.209.2024.03.24.14.44.27 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 24 Mar 2024 14:44:29 -0700 (PDT) From: Wadim Mueller To: Cc: Wadim Mueller , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Ulf Hansson , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , Greg Kroah-Hartman , Jiri Slaby , Chester Lin , =?utf-8?q?Andreas_F=C3=A4rber?= , Matthias Brugger , NXP S32 Linux Team , Tim Harvey , Marco Felsch , Marek Vasut , Gregor Herburger , Hugo Villeneuve , Joao Paulo Goncalves , Markus Niebel , Matthias Schiffer , Stefan Wahren , Bjorn Helgaas , Philippe Schenker , Josua Mayer , Li Yang , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-serial@vger.kernel.org Subject: [PATCH v4 4/4] arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3 Date: Sun, 24 Mar 2024 22:43:26 +0100 Message-Id: <20240324214329.29988-5-wafgo01@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240324214329.29988-1-wafgo01@gmail.com> References: <20240324214329.29988-1-wafgo01@gmail.com> Precedence: bulk X-Mailing-List: linux-mmc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 This commit adds device tree support for the NXP S32G3-based S32G-VNP-RDB3 Board [1]. The S32G3 features an 8-core ARM Cortex-A53 based SoC developed by NXP. The device tree files are derived from the official NXP downstream Linux tree [2]. This addition encompasses a limited selection of peripherals that are upstream-supported. Apart from the ARM System Modules (GIC, Generic Timer, etc.), the following IPs have been validated: * UART: fsl-linflexuart * SDHC: fsl-imx-esdhc Clock settings for the chip rely on ATF Firmware [3]. Pin control integration into the device tree is pending and currently relies on Firmware/U-Boot settings [4]. These changes were validated using BSP39 Firmware/U-Boot from NXP [5]. The modifications enable booting the official Ubuntu 22.04 from NXP on the RDB3 with default settings from the SD card and eMMC. [1] https://www.nxp.com/design/design-center/designs/s32g3-vehicle-networking-reference-design:S32G-VNP-RDB3 [2] https://github.com/nxp-auto-linux/linux [3] https://github.com/nxp-auto-linux/arm-trusted-firmware [4] https://github.com/nxp-auto-linux/u-boot [5] https://github.com/nxp-auto-linux/auto_yocto_bsp Signed-off-by: Wadim Mueller Tested-by: Ghennadi Procopciuc Reviewed-by: Ghennadi Procopciuc --- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/s32g3.dtsi | 233 ++++++++++++++++++ .../boot/dts/freescale/s32g399a-rdb3.dts | 45 ++++ 3 files changed, 279 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/s32g3.dtsi create mode 100644 arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 2cb0212b63c6..e701008dbc7b 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -252,3 +252,4 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb +dtb-$(CONFIG_ARCH_S32) += s32g399a-rdb3.dtb diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi new file mode 100644 index 000000000000..c1b08992754b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright 2021-2023 NXP + * + * Authors: Ghennadi Procopciuc + * Ciprian Costea + * Andra-Teodora Ilie + */ + +#include + +/ { + compatible = "nxp,s32g3"; + interrupt-parent = <&gic>; + #address-cells = <0x02>; + #size-cells = <0x02>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + clocks = <&dfs 0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + clocks = <&dfs 0>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + clocks = <&dfs 0>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + clocks = <&dfs 0>; + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + enable-method = "psci"; + clocks = <&dfs 0>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + enable-method = "psci"; + clocks = <&dfs 0>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + enable-method = "psci"; + clocks = <&dfs 0>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + enable-method = "psci"; + clocks = <&dfs 0>; + }; + }; + + firmware { + scmi: scmi { + compatible = "arm,scmi-smc"; + shmem = <&scmi_shmem>; + arm,smc-id = <0xc20000fe>; + #address-cells = <1>; + #size-cells = <0>; + + dfs: protocol@13 { + reg = <0x13>; + #clock-cells = <1>; + }; + + clks: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scmi_shmem: shm@d0000000 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0xd0000000 0x0 0x80>; + no-map; + }; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x80000000>; + + uart0: serial@401c8000 { + compatible = "nxp,s32g3-linflexuart", + "fsl,s32v234-linflexuart"; + reg = <0x401c8000 0x3000>; + interrupts = ; + status = "disabled"; + }; + + uart1: serial@401cc000 { + compatible = "nxp,s32g3-linflexuart", + "fsl,s32v234-linflexuart"; + reg = <0x401cc000 0x3000>; + interrupts = ; + status = "disabled"; + }; + + uart2: serial@402bc000 { + compatible = "nxp,s32g3-linflexuart", + "fsl,s32v234-linflexuart"; + reg = <0x402bc000 0x3000>; + interrupts = ; + status = "disabled"; + }; + + usdhc0: mmc@402f0000 { + compatible = "nxp,s32g3-usdhc", + "nxp,s32g2-usdhc"; + reg = <0x402f0000 0x1000>; + interrupts = ; + clocks = <&clks 32>, + <&clks 31>, + <&clks 33>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + gic: interrupt-controller@50800000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x50800000 0x10000>, + <0x50900000 0x200000>, + <0x50400000 0x2000>, + <0x50410000 0x2000>, + <0x50420000 0x2000>; + interrupts = ; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = , /* sec-phys */ + , /* phys */ + , /* virt */ + , /* hyp-phys */ + ; /* hyp-virt */ + arm,no-tick-in-suspend; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts new file mode 100644 index 000000000000..9d674819876e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright 2021-2023 NXP + * + * NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) + */ + +/dts-v1/; + +#include "s32g3.dtsi" + +/ { + model = "NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)"; + compatible = "nxp,s32g399a-rdb3", "nxp,s32g3"; + + aliases { + mmc0 = &usdhc0; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 4GiB RAM */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0 0x80000000>, + <0x8 0x80000000 0 0x80000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usdhc0 { + bus-width = <8>; + status = "okay"; +};